88-91 front end conversion harnesses available! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*gmachinz* · 11-26-2015, 02:10 PM

Just thought I'd mention I have several versions of this harness available now. I built none for a member here and they can be built either as stock replacement or with H4 plugs, sealed beam, etc. And, I can incorporate the remote washer pump for those using the 87-up drivers side fender washer jug with the built-in washer pump.

I have the schematics for 81-86 up trucks and are complete from the firewall plug out-includes high temp looming, rosebud clips and all the proper breakout locations and core support/frame grounds. I upgrade all the wiring, everything is soldered and the kits can have relay integrations for power and/or delay off capability. Here's a few pics so you have an idea-PM or post here with any specific questions about options. PM or email for price quotes-this thread is just meant to inform everyone that these are available in several configurations for those updating their front ends and would like the best plug n play harness conversion for it.

KQQL IT · 11-26-2015, 02:48 PM

What about the other way? I have a 91 crew and want to swap to a 73-74 clip.

*gmachinz* · 11-26-2015, 03:16 PM

Well, I do have 73-80 front lighting harnesses also-I can build it that way if you need it. The 88-91 trucks have a different style bulkhead connector but I stock those also so yes, if you need it setup for a 73-74 front end I can supply you with that. PM if you want so we can nail down what options you want incorporated with it or if you want a simple stock type replacement I can do that too. You may be the first person I've built that style of harness for...lol but I have schematics which I've drawn up so its no big deal.

KQQL IT · 11-27-2015, 01:10 AM

I thought the bulkhead connection was different. And it would be a stock style harness.
I need to collect up the sheetmetal for the swap 1st.
And I might go with the 86 style clip too.
Which I would think the harness is different too.
Thanks.

*gmachinz* · 11-27-2015, 02:56 AM

Correct-those bulkhead connectors too are different. It doesn't matter which direction you opt for, I can build a harness accordingly for you whenever you're ready.

11-26-2015, 02:10 PM	#1
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	88-91 front end conversion harnesses available! Just thought I'd mention I have several versions of this harness available now. I built none for a member here and they can be built either as stock replacement or with H4 plugs, sealed beam, etc. And, I can incorporate the remote washer pump for those using the 87-up drivers side fender washer jug with the built-in washer pump. I have the schematics for 81-86 up trucks and are complete from the firewall plug out-includes high temp looming, rosebud clips and all the proper breakout locations and core support/frame grounds. I upgrade all the wiring, everything is soldered and the kits can have relay integrations for power and/or delay off capability. Here's a few pics so you have an idea-PM or post here with any specific questions about options. PM or email for price quotes-this thread is just meant to inform everyone that these are available in several configurations for those updating their front ends and would like the best plug n play harness conversion for it. Attached Images

11-26-2015, 02:48 PM	#2
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,273	Re: 88-91 front end conversion harnesses available! What about the other way? I have a 91 crew and want to swap to a 73-74 clip. __________________ " That didnt make it any newer " " Dont antique the equipment "

11-26-2015, 03:16 PM	#3
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 88-91 front end conversion harnesses available! Well, I do have 73-80 front lighting harnesses also-I can build it that way if you need it. The 88-91 trucks have a different style bulkhead connector but I stock those also so yes, if you need it setup for a 73-74 front end I can supply you with that. PM if you want so we can nail down what options you want incorporated with it or if you want a simple stock type replacement I can do that too. You may be the first person I've built that style of harness for...lol but I have schematics which I've drawn up so its no big deal.

11-27-2015, 01:10 AM	#4
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,273	Re: 88-91 front end conversion harnesses available! I thought the bulkhead connection was different. And it would be a stock style harness. I need to collect up the sheetmetal for the swap 1st. And I might go with the 86 style clip too. Which I would think the harness is different too. Thanks. __________________ " That didnt make it any newer " " Dont antique the equipment "

11-27-2015, 02:56 AM	#5
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 88-91 front end conversion harnesses available! Correct-those bulkhead connectors too are different. It doesn't matter which direction you opt for, I can build a harness accordingly for you whenever you're ready.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.