FL WTB - 250-I6 without integrated intake

[mrf1002u]

Looking to buy North Florida or South Georgia 250-I6 that you might be removing for a V-8 swap.

Rather have early 70's without the integrated manifolds.

I have a low budget.

Larry W.

[mrf1002u]

Originally Posted by mrf1002u

Looking to buy North Florida or South Georgia 250-I6 that you might be removing for a V-8 swap.

Rather have early 70's without the integrated manifolds.

I have a low budget.

Larry W.

Ok,

I guess I'm still looking for a 250 I-6? I suppose????

Had a deal worked, price agreed to and a day (today)...but no response of any kind from the member for the last few days. (Hopefully they are well.)

If you have a 250 runner, let me know. I may still need it.

Larry W.

[Grumpy old man]

I have 3 but your 500 miles south of me . have you checked the Jacksonville area junk yards or use searchtempest.com to search all the local craigslist ads at one time

[mrf1002u]

Originally Posted by Grumpy old man

I have 3 but your 500 miles south of me . have you checked the Jacksonville area junk yards or use searchtempest.com to search all the local craigslist ads at one time

Thanks Grumpy,

You are a bit out of my comfort zone for driving. As you assumed I'm sure. LOL.

I have been beating the forums, craigslist, ebay etc. Even the Turkey Rod Run (not a single one).



I may have to call the junkyards, but I wouldn't imagine they would have much from the 70's. Don't they turn inventory over pretty quickly? I also assume they will be pricey, but who knows.

I was going to go to the local pick a part, but it's a pain to pull it yourself in their yard. I did it with a Jeep 360 once.

I WILL find one close in time. I guess I'm just aggravated that people commit and then just apparently back out on a deal. As I said, I hope it's not a health issue or something.

It's probably my fault. Assuming I would get it, I bought a bellhousing and a starter to go with it. Silly me. I doomed it right there. LOL

Thanks,

Larry W.

[mrf1002u]

Originally Posted by mrf1002u

Thanks Grumpy,

You are a bit out of my comfort zone for driving. As you assumed I'm sure. LOL.

I have been beating the forums, craigslist, ebay etc. Even the Turkey Rod Run (not a single one).



I may have to call the junkyards, but I wouldn't imagine they would have much from the 70's. Don't they turn inventory over pretty quickly? I also assume they will be pricey, but who knows.

I was going to go to the local pick a part, but it's a pain to pull it yourself in their yard. I did it with a Jeep 360 once.

I WILL find one close in time. I guess I'm just aggravated that people commit and then just apparently back out on a deal. As I said, I hope it's not a health issue or something.

It's probably my fault. Assuming I would get it, I bought a bellhousing and a starter to go with it. Silly me. I doomed it right there. LOL

Thanks,

Larry W.

I may still be getting this engine. Hopefully.

[STP67-72]

I have a nice running 68 complete motor. Pulled few months back. 350.00. But it's in Texas.

[mrf1002u]

Originally Posted by STP67-72

I have a nice running 68 complete motor. Pulled few months back. 350.00. But it's in Texas.

Thanks,

Ill keep it in mind if this one doesn't pan out.

Larry W.

[Vero67]

They pop up alot on West Palm Beach craigslist, just search, 1967 or 1968 chevy, or c10.

[mrf1002u]

Originally Posted by Vero67

They pop up alot on West Palm Beach craigslist, just search, 1967 or 1968 chevy, or c10.

Thanks for the heads up.

Larry

[EARNHARDT#3]

I have good intake and exhaust manifolds if you end up needing them.

[mrf1002u]

Originally Posted by EARNHARDT#3

I have good intake and exhaust manifolds if you end up needing them.

Thanks. I'll let you know.

[Grumpy old man]

I have this one that runs great ,I just dropped it in this shortbed frame.

new valve cover,oil pan,timing cover ,thermostat housing, intake and exhaust gaskets ,new exhaust manifold lower studs , painted and ready to drop in . $450.00 + shipping or I have a 292 ? Or I have another 250 in another parts truck for $275.00 +

http://

[mrf1002u]

Thanks,

Any of the three would make me happy, but the shipping kills it for me.

Larry W.

[mrf1002u]

Originally Posted by mrf1002u

Thanks,

Any of the three would make me happy, but the shipping kills it for me.

Larry W.

I got the engine. No longer needed, Thanks!!

Larry W.