|
01-24-2016, 01:12 PM
|
#1 |
|
Registered User
Join Date: Mar 2015
Location: Belford uk
Posts: 120
|
rear cab cross member
hi all i was going to leave the xmember at the rear of the cab in place on my bagged 49, and use a split prop to get round it during the drop, but ive now changed my mind i think and want to cut a section from the centre of the xmember to allow for a single piece prop, can i see pic's of how others have modified theirs please! its just visible under the rear of the cab
|
|
|
|
01-24-2016, 04:54 PM
|
#2 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,710
|
Re: rear cab cross member
That's a heck of a lot of extra effort to go to just to run a 1 piece driveshaft. I can never understand why guys are so blooming afraid of 2 piece driveshafts as long as they are done right.
If you go ahead and go one piece I'd say weld in a piece that resembled a driveshaft hoop on a race car in the area you cut out and then cut a notch in the front of the box and do something similar and then on the back of the cab.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
