Rubber floor mat from a different truck to cover whole floor and firewall - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BigSix · 01-31-2016, 11:57 PM

Has anyone ordered a different floor mat than the ones made for our trucks? I believe the ones made for our trucks don't cover the firewall. I was hoping to have a thick, insulated carpet or mat that went from the firewall down to behind the bench. I feel like the one I bought for my 1991 Ram would work but I am not sure how I would fasten it to the firewall section above the transmission hump. Any ideas on how to get complete coverage of the firewall/floor in one piece are welcome. Also, I have my sound insulation pad holes welded up so I cannot use those clip any longer. Would rather have a fully interior solution. I have a heat gun.

LostMy65 · 02-01-2016, 01:13 AM

There's an aftermarket one that covers the whole cab floor, but I don't think it goes all the way up the firewall.
Check out this thread :
http://67-72chevytrucks.com/vboard/s...ighlight=floor

Bullett · 02-01-2016, 01:30 AM

I just finished my carpet/firewall mat install today. I was hoping to find a one piece carpet that covered everything but didnt find any offered. I suspect the only way to find a one piece complete cover carpet or rubber mat would be an upholstery shop.

01-31-2016, 11:57 PM	#1
BigSix Registered User Join Date: Mar 2014 Location: MD/VA/PA Or Inbetween Posts: 413	Rubber floor mat from a different truck to cover whole floor and firewall Has anyone ordered a different floor mat than the ones made for our trucks? I believe the ones made for our trucks don't cover the firewall. I was hoping to have a thick, insulated carpet or mat that went from the firewall down to behind the bench. I feel like the one I bought for my 1991 Ram would work but I am not sure how I would fasten it to the firewall section above the transmission hump. Any ideas on how to get complete coverage of the firewall/floor in one piece are welcome. Also, I have my sound insulation pad holes welded up so I cannot use those clip any longer. Would rather have a fully interior solution. I have a heat gun. Last edited by BigSix; 02-01-2016 at 12:26 AM.

02-01-2016, 01:13 AM	#2
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Rubber floor mat from a different truck to cover whole floor and firewall There's an aftermarket one that covers the whole cab floor, but I don't think it goes all the way up the firewall. Check out this thread : http://67-72chevytrucks.com/vboard/s...ighlight=floor __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

02-01-2016, 01:30 AM	#3
Bullett Registered User Join Date: Dec 2013 Location: Fairfield, Maine Posts: 302	Re: Rubber floor mat from a different truck to cover whole floor and firewall I just finished my carpet/firewall mat install today. I was hoping to find a one piece carpet that covered everything but didnt find any offered. I suspect the only way to find a one piece complete cover carpet or rubber mat would be an upholstery shop.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.