|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-02-2016, 08:21 PM
|
#1 |
|
Registered User
Join Date: Jan 2016
Location: Chandler
Posts: 2
|
250 inlne 6 oil pressure port
I recently installed a rebuilt 250 from a local rebuilder in a 66 C10. It runs great but it did not have an oil pressure port in the block. Has anyone ever seen an inline 6 like this? Is there another oil passage, in the head maybe, that I can connect the oil pressure gauge to? The casting number on the block is 3994257.
|
|
|
|
02-02-2016, 08:38 PM
|
#2 |
|
Registered User
Join Date: Dec 2013
Location: Oak Ridge, Mo.
Posts: 301
|
Re: 250 inlne 6 oil pressure port
Should be a port right behind the dip stick tube. Maybe it just has a plug in it.
__________________
If you don't like this  pound sand .....
|
|
|
|
|
02-02-2016, 08:46 PM
|
#3 |
|
State of Confusion!
  
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,223
|
Re: 250 inlne 6 oil pressure port
This should give you an idea. It is down on side of block near dipstick tube. I stole the picture, but mine was in same location
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
|
|
|
|
02-02-2016, 09:56 PM
|
#4 |
|
Registered User
Join Date: Jan 2016
Location: Chandler
Posts: 2
|
Re: 250 inlne 6 oil pressure port
Thats where it is on the old block i had. I just took a picture of the new block and i see the plug. I dont know how i overlooked it when i was assembling the engine. Thanks so much for the responses.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
