Lower Control Arm Shaft Centering Rivet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

02-26-2016, 12:24 PM

#16

GASoline71

"I ain't nobody, dork."

Join Date: Sep 2007

Location: Whidbey Island, Washington

Posts: 8,971

Re: Lower Control Arm Shaft Centering Rivet

Quote:

Originally Posted by 68 P.O.S.

Did you decide on what to do about the rivet?

I happen to have some grade 8 bolts that fit perfectly. They're 5/16" or 3/8" bolts, but not 100% sure. Once bolted into the crossmember I will probably have to cut off the end of the bolt off if they are way too long. I shimmed the bolt head with 2 washers to get it to engage the drilled centering hole in the cross shaft.

Gary

Attached Images

__________________
'cuz chicks dig scars...

My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread.

The Rebuild of Creeping Death after the wreck

Quote:

Originally Posted by LONGHAIR

I would never rebuild a 305.

Quote:

Originally Posted by prostreetC-10

I love using vacuum gauges as part of the carb tuning process. I hook the gauge to the inside of my garbage can and leave it there.

Quote:

Originally Posted by Marv D

Remember Murphys 2nd law of mechanical relationships... "OPPOSING COMPONENTS ATTEMPTING TO OCCUPY THE SAME SPACE, AT THE SAME TIME, GENERALLY END UP OCCUPYING ADJOINING SPACE AT THE BOTTOM OF THE OIL PAN"

Quote:

Originally Posted by cableguy0

Its cheaper to listen to advice given when you ask for help than it is to ignore everyone and wait for carnage.

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -4. The time now is 02:57 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.