New Product: Hood Strut Kit 81-91 Squarebodys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WAM Rods · 03-11-2014, 10:03 AM

WAM Rods is now here & a Gold Vendor on this site.

We'd like to introduce our Hood Strut Kit for 81-91 Chevy & GMC Squarebody Trucks & SUV's.
They will work with factory inner fenders, no inner fenders, SloshTubz, & most custom inner fenders.

The price for the kit is $125 with FREE shipping to the Continental US.
(please contact us for a shipping quote to other locations)

Please feel free to contact us with any questions.

Here is the information on our kit:

Name: wamad1.jpg
Views: 1330
Size: 104.7 KB

Name: wamad1.jpg
Views: 1330
Size: 104.7 KB

WAM Rods · 03-11-2014, 10:05 AM

Here are a few trucks running our kit...

RedRat

Name: 7.jpg
Views: 1215
Size: 56.9 KB

Low1Ton

Scoti

Name: 20140301_120100.jpg
Views: 1227
Size: 55.1 KB

burb1085 · 03-11-2014, 10:39 AM

Looks good. Does the hood open to the same height?

WAM Rods · 03-11-2014, 10:45 AM

We designed our kit to have the hood open about even with the top of the cab for a nice look at shows.

It's roughly 27" from the top of the radiator support to the bottom edge of the hood in the center of the truck.

If you need more access you can simply pop the struts off the ball studs on one end & then use a temporary hood prop.

At your own discretion, you can move the pivot points a little to gain more hood opening (Scoti did in the picture above) but we designed our kit & pivot point location for the best result with the struts provided.

Jonboy · 03-11-2014, 10:45 AM

Looks cool. Do you guys plan on doing one for the earlier trucks to get rid of the hinge springs?

WAM Rods · 03-11-2014, 10:53 AM

Quote:

Originally Posted by Jonboy

Looks cool. Do you guys plan on doing one for the earlier trucks to get rid of the hinge springs?

At the current time we do not have plans for a kit for the 73-80 trucks since it is a completely different setup.

LOW1TON · 03-11-2014, 04:07 PM

Buy this kit! It works great I have had mine for about 5 years with zero issue. Awesome product for a small price. Really updates the functionality of these older trucks!

SCOTI · 03-11-2014, 05:56 PM

I'm thinking about getting a 2nd kit just in case.... I have 4 trucks so adding another is not out of the realm of possibilities

**rs74** · 03-11-2014, 06:03 PM

Will they work with Harwood fiberglass hoods?

520CheyenneK10 · 03-11-2014, 07:07 PM

Quote:

Originally Posted by WAM Rods

At the current time we do not have plans for a kit for the 73-80 trucks since it is a completely different setup.

Get after it then...... (LOL) I'd be willing to pay more than a few $'s for a set if you do it. Your product looks great by the way!!

WAM Rods · 03-11-2014, 07:39 PM

Quote:

Originally Posted by rs74

Will they work with Harwood fiberglass hoods?

We have never tested them on a fiberglass hood.
My concern would be the strength of the mounting points vs. the strength of the strut.

DREAMER1 · 03-12-2014, 09:45 AM

Looks really good.

WAM Rods · 03-13-2014, 08:46 AM

Quote:

Originally Posted by SCOTI

I'm thinking about getting a 2nd kit just in case

Let us know when you are ready! Thanks!

Quote:

Originally Posted by DREAMER1

Looks really good.

Thank you!

blazer2007 · 03-13-2014, 10:10 AM

I vote for 73-80,s kit too

WAM Rods · 03-14-2014, 08:26 AM

If we ever make the kit for the early squares you guys will be the first to know.

jwa76fleetside · 02-23-2015, 01:56 PM

did you guys ever decide to make for earlier squares?

WAM Rods · 02-24-2015, 10:00 AM

Quote:

Originally Posted by jwa76fleetside

did you guys ever decide to make for earlier squares?

No sorry we have not.

UKNOWME · 03-01-2016, 01:27 AM

Still making these?

WAM Rods · 03-01-2016, 07:34 AM

Quote:

Originally Posted by UKNOWME

Still making these?

Yes we are for 81-91 & 88-98's

wamrods@gmail.com

03-11-2014, 10:03 AM	#1
WAM Rods Registered User Join Date: Mar 2014 Location: Tulsa, OK Posts: 16	New Product: Hood Strut Kit 81-91 Squarebodys WAM Rods is now here & a Gold Vendor on this site. We'd like to introduce our Hood Strut Kit for 81-91 Chevy & GMC Squarebody Trucks & SUV's. They will work with factory inner fenders, no inner fenders, SloshTubz, & most custom inner fenders. The price for the kit is $125 with FREE shipping to the Continental US. (please contact us for a shipping quote to other locations) Please feel free to contact us with any questions. Here is the information on our kit: __________________ WAM Rods More info here

03-11-2014, 10:05 AM	#2
WAM Rods Registered User Join Date: Mar 2014 Location: Tulsa, OK Posts: 16	Re: New Product: Hood Strut Kit 81-91 Squarebodys Here are a few trucks running our kit... RedRat Low1Ton Scoti __________________ WAM Rods More info here

03-11-2014, 10:39 AM	#3
burb1085 Registered User Join Date: Mar 2011 Location: Lancaster,Oh. Posts: 138	Re: New Product: Hood Strut Kit 81-91 Squarebodys Looks good. Does the hood open to the same height?

03-11-2014, 10:45 AM	#4
WAM Rods Registered User Join Date: Mar 2014 Location: Tulsa, OK Posts: 16	Re: New Product: Hood Strut Kit 81-91 Squarebodys We designed our kit to have the hood open about even with the top of the cab for a nice look at shows. It's roughly 27" from the top of the radiator support to the bottom edge of the hood in the center of the truck. If you need more access you can simply pop the struts off the ball studs on one end & then use a temporary hood prop. At your own discretion, you can move the pivot points a little to gain more hood opening (Scoti did in the picture above) but we designed our kit & pivot point location for the best result with the struts provided. __________________ WAM Rods More info here Last edited by WAM Rods; 03-11-2014 at 10:50 AM.

03-11-2014, 10:45 AM	#5
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: New Product: Hood Strut Kit 81-91 Squarebodys Looks cool. Do you guys plan on doing one for the earlier trucks to get rid of the hinge springs? __________________ 1974 Jimmy- 5.3/4L80e/NP241

03-11-2014, 04:07 PM	#7
LOW1TON Registered User Join Date: Jan 2010 Location: BRISTOW OKLAHOMA Posts: 247	Re: New Product: Hood Strut Kit 81-91 Squarebodys Buy this kit! It works great I have had mine for about 5 years with zero issue. Awesome product for a small price. Really updates the functionality of these older trucks! __________________ "WIDER IS BETTER" (TRUCKS ONLY)

03-11-2014, 05:56 PM	#8
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Re: New Product: Hood Strut Kit 81-91 Squarebodys I'm thinking about getting a 2nd kit just in case.... I have 4 trucks so adding another is not out of the realm of possibilities __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-11-2014, 06:03 PM	#9
rs74 Senior Member Join Date: Jun 2010 Location: Illinois Posts: 2,957	Re: New Product: Hood Strut Kit 81-91 Squarebodys Will they work with Harwood fiberglass hoods? __________________ Roy 85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818 1987 R10 shortie

03-12-2014, 09:45 AM	#12
DREAMER1 Registered User Join Date: Dec 2010 Location: baytown, texas Posts: 310	Re: New Product: Hood Strut Kit 81-91 Squarebodys Looks really good.

03-13-2014, 10:10 AM	#14
blazer2007 Registered User Join Date: Jan 2007 Location: vernon b.c. Posts: 3,022	Re: New Product: Hood Strut Kit 81-91 Squarebodys I vote for 73-80,s kit too

03-14-2014, 08:26 AM	#15
WAM Rods Registered User Join Date: Mar 2014 Location: Tulsa, OK Posts: 16	Re: New Product: Hood Strut Kit 81-91 Squarebodys If we ever make the kit for the early squares you guys will be the first to know. __________________ WAM Rods More info here

02-23-2015, 01:56 PM	#16
jwa76fleetside Registered User Join Date: Mar 2009 Location: bothell Posts: 247	Re: New Product: Hood Strut Kit 81-91 Squarebodys did you guys ever decide to make for earlier squares? __________________ 76 Chevy Fleetside 63 Lincoln Continental w/ Ford Racing 460 (550hp) 2012 VW GTI 2013 Escalade 2008 Harley

03-01-2016, 01:27 AM	#18
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: New Product: Hood Strut Kit 81-91 Squarebodys Still making these? __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.