NM Front bolts on rear bench - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jobrla · 03-15-2016, 05:25 PM

Afternoon all. I never had the front hold down brackets for my rear seat on my 72 K5. Because of the bottom nut caps underneath, it held in dirt and water for many years. Could someone please tell me the original bolt size and thread for these so I can chase them out and see if still usable before re-tapping.

Thanks

bluek5 · 03-15-2016, 06:23 PM

The bolts for the front hold down brackets are 7/16-20 UNF.

jobrla · 03-15-2016, 07:04 PM

Quote:

Originally Posted by bluek5

The bolts for the front hold down brackets are 7/16-20 UNF.

10-4 sir, was running thru my taps and found it 10 mins before your post. Thank you sir for your reply,

03-15-2016, 05:25 PM	#1
jobrla Registered User Join Date: Jan 2015 Location: Las Cruces, NM Posts: 190	Front bolts on rear bench Afternoon all. I never had the front hold down brackets for my rear seat on my 72 K5. Because of the bottom nut caps underneath, it held in dirt and water for many years. Could someone please tell me the original bolt size and thread for these so I can chase them out and see if still usable before re-tapping. Thanks

03-15-2016, 06:23 PM	#2
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: Front bolts on rear bench The bolts for the front hold down brackets are 7/16-20 UNF.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.