TX Parting - 1972 4WD Blazer

[Frugalmeyer]

Pulling the suspension in "Mid June". I will pull the drivetrain earlier if a can have most of it sold.
I am posting this thread in advance because once I pull the Blazer in the garage to begin the conversion I do not have much room to store the parts I pull and need them gone. I am going to be replacing the 4WD suspension and drivetrain with 2WD, 5 Lug, LS powered and vintage air.
I will be selling all the 4WD suspension, drivetrain, wheels and tires and A/C system.

[Frugalmeyer]

I will be keeping the A/C control and dash vents.

[1972 Jimmy]

Interest in the evaporator mounted in front of the radiator. What shape is it in??? Any broken fins??

[Brave71]

I need vac canister, inside and outside vac actuators, all brackets for actuators, also flapper in cowl.there is a couple of rods that hook to actuators l need.how much to 89015..thanks

[Arrington01]

What gear ratio are the axles?

[Frugalmeyer]

Looks like RAZ axle code but not sure. Photos attached.

[Arrington01]

How much

[bluek5]

Does it have a skid plate and cross member for the transfer case? Also how about the gear reducer for the speedometer cable. Would need them shipped to 84043.
Thanks, Paul

[Frugalmeyer]

Transfer cross member and skid plate.

[RedRoad]

Interested in the cowl vent flap assembly. Stick or auto? Looking for single bend shifter if stick.

Thanks

[tristan]

Possibly interested in all of the AC components mounted to the inside and outside of the firewall plus the compressor, brackets hoses, and other bric-a-brac that you aren't keeping. I don't need the condenser, controls, diverter box or dashboard stuff.

[DeadheadNM]

I'd be interested in the following pending condition pics and cost w shipping to 87107:
Radiator
Fan shroud
Fuel tank skid plate w attach bolts
Linkage from shift lever to tcase and or tcase shifter bolt
Hei distributor
Engine oil dip stick
Metal hose strap affixed to inner RH fender w screws

Thanks

[hold24]

I would be interested in a bed mat if its a clean one or even has it
thanks

[1972 Jimmy]

Is the 4x4 shifter Chrome if so what condition and price?

[Frugalmeyer]

No Bed mat.

[1970]

Interested in

front leaf spring hanger brackets
bump stop brackets
upper shock brackets
rear spring front brackets
radiator core brackets

[72chevynut]

Please put me in line for the AC vacuum ball tank and bracket. Shipping would be to 40353. Thanks

[leddzepp]

Please list prices per forum rules ASAP. Thank you!

[Frugalmeyer]

I am new to this board and will read the rules and try this again. Sorry for any inconvenience.

[walkintall54]

interested in drive shaft.

[extd56]

are you selling the hatch

[tristan]

I'm giving up first dibs on the AC equipment to any of you guys who may have an immediate need. If no one needs them then I may be baaaack....

[Frugalmeyer]

Radiator 85.00 plus shipping. No leaks.
Fan Shroud 55.00 plus shipping. One hole drilled in center top.

DeadheadNM has first dibs.

[DeadheadNM]

Thank you - I'll take the radiator pending ship cost to 87107 if it's a 4-row Harrison for auto tranny K5. I'll pass on the shroud but would be interested in the clips that mount the lower shroud to the rad support if present and curious about remaining items on the list. Best, Pete

[Frugalmeyer]

DeadheadNM
Looks like a 3 row factory radiator. Clips will go with the fan shroud.