FS: LSA Complete Accessory Drive System w/ Extras

[SMKN TA 95]

Up for sale is my LSA Accessory Drive package. Due to engine placement in my truck, I have to go a different route as far as the FEAD (Front End Accessory Drive) for my LSA Combination and clearance with the truck.
Everything listed is Brand new, and only mocked up for pictures.
Complete LS Simple LSA 8 Rib Accessory Drive - w/ 8 rib pulleys for Power Steering Pump, Alternator, idlers, tensioner, hardware etc. This kit uses ANY LS alternator and a truck style power steering pump. New this package runs $700 from LS Simple. Just needs an LSA balancer to use the 8 rib and a water pump. One entire belt runs the blower and all accessories (minus air).
Extras Included With LSA Accy Drive it.
- Truck style balancer (If you want to run this with a 6 rib belt) for free.
- Brand New F-body GM Water pump (Billet spacers included)

SOLD
_____________________________________
Options that I can add to the package....
- New Truck 6.0 GM Water pump if the car style isn't wanted. Either works.
- New 6.0 Truck Power Steering Pump w/ reservoir - $160
- Low Mount AC brkt with tensioner for a Sanden Compressor, works with the middle set of grooves on LSA balancer as shown - $150
_____________________________________

Contact me @ 815-866-6195 or email smknta95@hotmail.com

ALL ITEMS SOLD!!

[SMKN TA 95]

Revised the prices.

[juddss]

Soo tempting. Why weren't you selling this 2 weeks ago. I just bought an olson kustom LSA front acc drive bracket to use truck accessories. DAMNIT!!!
What year truck are you putting it in . I have a 70 burb LSA swap going on right now

[juddss]

Ahh just looked at your signature you have a 72. What issues are you having with it fitting correctly??

[juddss]

Here is mine so far. What headers are you going to use Trailblazer ss ones?

[SMKN TA 95]

Engine setback is going to have issues with my low mount AC compressor and my motor mount stands.

Plus, I am not able to run my new ATI LSA balancer w/ the 10% overdrive pulley with this drive setup.

[juddss]

Ahh, Yeah I have to figure out what mounts and stands I need and headers. Good luck with sale. Still thinking about it though. That's Very nice looking. I want that alternator!!!

[SMKN TA 95]

Im a set of Hedman C10 swap headers, 2" primaries with 3" collector. I have a set of LPE CNC LSA heads going on, with studs, camshaft, and all sorts of top end stuff.

Olson made my fuel rails...which are very nice! I like this drive unit over his though

[juddss]

Nice mine is a 12 escalade 6.0 with LSA heads and brian tooley stage 3 blower cam, head studs. Olson billet fuel lines should be here next week.
I couldn't find any 2 inch primary headers anywhere. Whats the part number?
I was going to get it running properly and then possibly drop to a 2.4 pulley. Theese motors are gonna scream !!!!!! I cant wait.

[juddss]

What motor stands and mounts are you going to use

[SMKN TA 95]

Hedman Ceramic Coated Headers #45716. I have them sitting here as we speak. No fitment checkes yet, but I will eventually.

I am using a complete Scott's Hot Rods Bolt-in IFS on my truck, and trying to set the engine far back as I can. I have some adapter plates for the motor mounts now that set it back more than most. But the main issue was the 10% over driven pulley and fitment.

[SMKN TA 95]

Still for sale.

[SMKN TA 95]

All items are sold. Thank you!