Rack and Pinion question

[robnolimit]

Originally Posted by AustinBelair

Rob,

I was about to order the Unisteer but called your shop today and spoke to a nice lady. Does your rack come with the shaft to mount to an Ididit column? That was one of the more attractive things about the US setup.

Also, yours is based off of a 2000 Silverado. Those didn't come with LS motors (I didn't think) so will your rack handle the PSI of an LS pump?

Our kit includes the lower U-joint, the lower shaft, the center U-joint, and the support bearing. From that point, you will need 8" to 12" of 3/4"DD shaft, and an upper U-joint to fit the column. We don't include this because many people are changing columns, and that means different shaft length and different U-joints. We do have these items available. If you are changing columns, I suggest the IDIDIT 'short' version C10 column, we haelped design these with rack & pinion steering in mind. As far as the pump, these racks have no problem with hi-pressure and type-II pumps. You can even use the OE hoses from a 2000-2008 1500 2wd.