TX 67-72 custom tail lights (1st set of this kind) super bright

[Robznob11]

I just finished these. They are the first set of 52 each super flux chips. They will hurt your eyes on the high side. $187 shipped. Plug and play. http://youtu.be/nhX8FG9Xkwk

[74baggedbug]

Man I want these!!! Can never have enough brightness when it comes to tailights

[Robznob11]

Yea they turned out better than I expected. But they took a lot of time and soldering... They really are hard to look at when the brake light is on..

[aboesec10]

does that price include the backup lamps?

[Robznob11]

Originally Posted by aboesec10

does that price include the backup lamps?

Not on this set. If you want regular leds like in the first pics on the thread it's 187$ for tails and reverse set. THey are bright too but these are brighter .

[Robznob11]

Well I figured these would be a lot more popular😳 with the time/ and cost to make this style there may not be a market... I'll do 177$ shipped if any one is interested . They may have to ride on my truck..

[chewychevy67]

Are the reverse lights bright like these? Would you do 200 shipped for these and a pair of reverse lights to a us address? They would have to be shipped this upcoming week cause its going to be picked up early feb.

[Robznob11]

Originally Posted by chewychevy67

Are the reverse lights bright like these? Would you do 200 shipped for these and a pair of reverse lights to a us address? They would have to be shipped this upcoming week cause its going to be picked up early feb.

All of the reverse lights I make are very bright. The regular led reverse have 32 leds each and are a 50$ add on. The super flux are 24 chips ( I'm out of these now) they are 75$ add on. Weather I do a full set or partial I always charge 12$ to cover shipping/ handling/PayPal/ insurance. To answer your question it would be 227$ . I'm basically doing the reverse for free at 50$. People don't consider each part comes from a different vendor with tax and shipping. And they take several hours to build especially the super flux ones. I sell a full set of the regular ones for $187 shipped if you want to go that route.
Thanks Rob!

[Bennett68C10]

If chewychevy67 passes then I will take these super bright tail lights with your reverse lights for $227.00 shipped.

[chewychevy67]

I'll let bennet68c10 have these.

[Robznob11]

These are sold! But I do have the stuff to make another set.... Pm me if interested!

[jondancer]

Wow just watched the video, these are awesome .

[Robznob11]

Originally Posted by jondancer

Wow just watched the video, these are awesome .

Thank you sir. Yea I know some people may think they are pricey but they are very bright. These leds are very durable (name brand). They are used in signs... They cost more and take a lot longer to assemble. But I'm confident the end product is pretty top notch. To bring the price down the last member bought these with the standard reverse lights for $227 shipped. I will offer the full super flux set for 252$ shipped.

[joeminnesota]

Finally a day nice enough in Minnesota to get my truck out to take some pictures of the LED's! The top two are Backup and Tail Lights. The bottom two are Brake lights. There was too much glare from the snow in the yard to get a good picture of the left side, but they look the same! Love them and super easy to install!

[Robznob11]

I'm glad you like them! here are a few more!

[lyrikz]

Originally Posted by Robznob11

I just finished these. They are the first set of 52 each super flux chips. They will hurt your eyes on the high side. $187 shipped. Plug and play. http://youtu.be/nhX8FG9Xkwk

What's the warrant and how do they mount? How do the hold up to water and mud

[Robznob11]

Well I never really thought about it. I had some members ask me to make them so I did. I would say a year is fair but to be truthful I'm not out to take advantage of anyone I have been on this board for years and if a set fails for some reason I make ever attempt to make it right even if it's past a year. As far as mud and water. I'm sure they like any other electric item will not do well submurged. But these are designed to fit snug into the stock housing no bolts no screws. Unplug the bulb plug in the leds. At most you may have to flip the wires on them . So far it's been 50/50 on the orientation of the wires. Gm did not figure it was important to put them all the same since regular bulb's don't care about polarity .with that said our trucks have gaskets on the light housing's to prevent water, as long as they are good there should be no problems. I'll guarantee my work but as we all know sometimes you get a bad led that fails prematurely. So far that has not happened but it could and it just takes shipping them to me and I'll fix it and ship it back. I do make them so that they never see power above what they can handle ( they are wired to handle up to14.6v )Hope this helps! Thanks.

[lyrikz]

Originally Posted by Robznob11

Well I never really thought about it. I had some members ask me to make them so I did. I would say a year is fair but to be truthful I'm not out to take advantage of anyone I have been on this board for years and if a set fails for some reason I make ever attempt to make it right even if it's past a year. As far as mud and water. I'm sure they like any other electric item will not do well submurged. But these are designed to fit snug into the stock housing no bolts no screws. Unplug the bulb plug in the leds. At most you may have to flip the wires on them . So far it's been 50/50 on the orientation of the wires. Gm did not figure it was important to put them all the same since regular bulb's don't care about polarity .with that said our trucks have gaskets on the light housing's to prevent water, as long as they are good there should be no problems. I'll guarantee my work but as we all know sometimes you get a bad led that fails prematurely. So far that has not happened but it could and it just takes shipping them to me and I'll fix it and ship it back. I do make them so that they never see power above what they can handle ( they are wired to handle up to14.6v )Hope this helps! Thanks.

Awesome. Good to know. Do you plan on making them in the near future. I definitely want a set but it would be in a few years.

[Robznob11]

Originally Posted by lyrikz

Awesome. Good to know. Do you plan on making them in the near future. I definitely want a set but it would be in a few years.

I don't know how long I'll make them. I don't plan to start a business. I have enough stuff to make about 4 more sets. After that not sure but if someone is interested they could pm me and if I can I'll help them out. It's a hobby for me I work full time so I just do them when I have time or when someone ask. I originally made them just for my truck but everyone liked them .

[lyrikz]

Originally Posted by Robznob11

I don't know how long I'll make them. I don't plan to start a business. I have enough stuff to make about 4 more sets. After that not sure but if someone is interested they could pm me and if I can I'll help them out. It's a hobby for me I work full time so I just do them when I have time or when someone ask. I originally made them just for my truck but everyone liked them .

]

Years, lol,. sorry. MoNTHS!!!!

[Robznob11]

I will have a full set of these ready to ship Monday. Pm me if you're interested... 250$ shipped

[Robznob11]

Bump

[Robznob11]

Bump