The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-23-2012, 01:11 AM   #1
Slow Build
Registered User
 
Slow Build's Avatar
 
Join Date: Sep 2009
Location: California Delta
Posts: 2,163
How can I tell the differense between 5.3 and a 4.8 liter LS motors

I'm looking at a few LS motors that are already pulled at some auto dismantlers. How can I tell if it's a 5.3 or a 4.8?
__________________
Name: Rich
Current Ride: 1964 C-10 Short Fleetside
Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe
Past GM Trucks:
1959 GMC short stepside
1968 GMC short stepside-4x4
1973 Chevy short stepside
1989 Chevy short fleetside-reg cab
1993 Chevy short fleetside-Xcab
2002 Chevy short fleetside-Xcab

Save the dinosaurs, use synthetic oil.
Slow Build is offline   Reply With Quote
Old 06-23-2012, 01:37 AM   #2
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,267
Re: How can I tell the differense between 5.3 and a 4.8 liter LS motors

I'm sure others will be much more help but I know most if not all have it stamped on them if they are already pulled you should be able to see the stamping...
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 06-23-2012, 09:56 AM   #3
suspect
Registered User
 
suspect's Avatar
 
Join Date: Jul 2011
Location: oklahoma city
Posts: 692
Re: How can I tell the differense between 5.3 and a 4.8 liter LS motors

i'm not aware of a way to tell visually. i think the only difference is the stroke length. i'm sure they would give you hard time, but is it possible to take the intake and a head off to measure the stroke?
__________________
Daniel
68 C10 Build http://67-72chevytrucks.com/vboard/s...d.php?t=503594

Romans 10:13 Everyone who calls on the name of the Lord will be saved.
suspect is offline   Reply With Quote
Old 06-23-2012, 10:35 AM   #4
cableguy0
Senior Member
 
Join Date: Apr 2000
Location: Delta,Pa
Posts: 14,948
Re: How can I tell the differense between 5.3 and a 4.8 liter LS motors

As far as I remember the designation is stamped into the block. Also if it still has the airbox attached which it should the emissions sticker will tell you.
__________________
Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.
cableguy0 is offline   Reply With Quote
Old 06-23-2012, 11:12 AM   #5
DjS71
Registered User
 
Join Date: Feb 2009
Location: Santa Rosa, CA
Posts: 267
Re: How can I tell the differense between 5.3 and a 4.8 liter LS motors

If I recall, the block for the 5.3/4.8 is the same. It'll even say "4.8/5.3" on the block. If you can't pull a head / oil pan or get a VIN, make sure you buy it for a price that is reasonable for a 4.8. Just to cover your butt.
__________________
1971 C10 Short/Fleet 307-2BBL/3OTT
1999 Silverado 2500 ECSB 6.0/4L80
DjS71 is offline   Reply With Quote
Old 06-23-2012, 12:17 PM   #6
dwcsr
Hollister Road Co.
 
dwcsr's Avatar
 
Join Date: Apr 2005
Location: Houston
Posts: 6,131
Re: How can I tell the differense between 5.3 and a 4.8 liter LS motors

The 4.8/5.3 use the same block with the 4.8/5.3 designation cast into it.
The older 4.8 had dished pistons and the 5.3 flat tops prior to 2004 after 2004 they both had flat tops. The crank casting number is the only way to tell for sure or if you have the PCM get the vin and it will also tell you.

I was told that on the casting 4.8/5.3 on the front there should be a paint mark that covers either 4.8 or 5.3 and that is the way the factory new which was which on the line. It did on mine but it may not actually be correct, I only had one motor to check it on.
dwcsr is offline   Reply With Quote
Old 06-24-2012, 02:59 AM   #7
Slow Build
Registered User
 
Slow Build's Avatar
 
Join Date: Sep 2009
Location: California Delta
Posts: 2,163
Re: How can I tell the differense between 5.3 and a 4.8 liter LS motors

Quote:
Originally Posted by dwcsr View Post
I was told that on the casting 4.8/5.3 on the front there should be a paint mark that covers either 4.8 or 5.3 and that is the way the factory new which was which on the line. It did on mine but it may not actually be correct, I only had one motor to check it on.
Which did the paint cover, the size it is or the size it isn't?
__________________
Name: Rich
Current Ride: 1964 C-10 Short Fleetside
Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe
Past GM Trucks:
1959 GMC short stepside
1968 GMC short stepside-4x4
1973 Chevy short stepside
1989 Chevy short fleetside-reg cab
1993 Chevy short fleetside-Xcab
2002 Chevy short fleetside-Xcab

Save the dinosaurs, use synthetic oil.
Slow Build is offline   Reply With Quote
Old 06-24-2012, 03:54 AM   #8
dwcsr
Hollister Road Co.
 
dwcsr's Avatar
 
Join Date: Apr 2005
Location: Houston
Posts: 6,131
Re: How can I tell the differense between 5.3 and a 4.8 liter LS motors

Quote:
Originally Posted by Slow Build View Post
Which did the paint cover, the size it is or the size it isn't?
The size it was.
dwcsr is offline   Reply With Quote
Old 06-24-2012, 07:31 AM   #9
'68OrangeSunshine
Senior Member
 
'68OrangeSunshine's Avatar
 
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,505
Re: How can I tell the differense between 5.3 and a 4.8 liter LS motors

I know nothing about LS motors, I'm strictly a '67/'72 owner, but 4.8L was the later designation for the L6 292 cu in. 350 = 5.7L. So I'll guess 5.3 is 327 (or thereabouts). So did they make a 4.8L V8?
[I heard Ford in the '50s came out with a 292 V8 ( no relation to the Chevy 292). I have also heard the Ford guys consider a dog. But I'm very fuzzy on Ford lore.]
Here's a bump, at any rate.
__________________


Every 25 years I like to rebuild that 292, whether it needs it or not.
'68OrangeSunshine is offline   Reply With Quote
Old 06-24-2012, 04:50 PM   #10
Slow Build
Registered User
 
Slow Build's Avatar
 
Join Date: Sep 2009
Location: California Delta
Posts: 2,163
Re: How can I tell the differense between 5.3 and a 4.8 liter LS motors

Quote:
Originally Posted by dwcsr View Post
The size it was.
You may be right. I can't find anything identifying number wise on the motor I'm looking at but I do see some yellow paint over the 4.8. I also found out that the vin# if available will have a V as the 8th character if it's a 4.8 and a T if it's a 5.3 so I found another truck in the same yard that had a bad motor and found a T in the vin# and yellow paint over the 5.3 on the front of that motor.

Quote:
Originally Posted by '68OrangeSunshine View Post
I know nothing about LS motors,
The engines I'm asking about are the Gen IV V8's.
__________________
Name: Rich
Current Ride: 1964 C-10 Short Fleetside
Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe
Past GM Trucks:
1959 GMC short stepside
1968 GMC short stepside-4x4
1973 Chevy short stepside
1989 Chevy short fleetside-reg cab
1993 Chevy short fleetside-Xcab
2002 Chevy short fleetside-Xcab

Save the dinosaurs, use synthetic oil.
Slow Build is offline   Reply With Quote
Old 06-27-2012, 01:06 AM   #11
Daaaanz67
Registered User
 
Join Date: Nov 2011
Location: Idaho
Posts: 857
Re: How can I tell the differense between 5.3 and a 4.8 liter LS motors

Check out ls1tech there is a good post on this subject
Posted via Mobile Device
Daaaanz67 is offline   Reply With Quote
Old 06-28-2012, 04:47 PM   #12
low69chevy
Registered User
 
low69chevy's Avatar
 
Join Date: Jul 2011
Location: edinburg tx
Posts: 174
Post Re: How can I tell the differense between 5.3 and a 4.8 liter LS motors

I kno on 99-06 gen III engines they have dished pistons like the 04-06 moreless most of them have the 706 heads and the older ones have the 862 or 863 can't remember behind the bracket where the power steering/alternator go it should be marked or behind on the block where it bolts up to the trans. On the genIV they had flat tops with 799/243 heads and some of the sensor were moved around (knock sensors,cam sensor,map sensor) and the gen 3 had the 24tooth reluctor wheel and gen4 have the 58 tooth.
Posted via Mobile Device
low69chevy is offline   Reply With Quote
Old 07-01-2012, 07:43 PM   #13
whitels1
Registered User
 
whitels1's Avatar
 
Join Date: Apr 2012
Location: Vegas
Posts: 617
Re: How can I tell the differense between 5.3 and a 4.8 liter LS motors

Pull the oil pan and look up the casting number on the crank, the only difference between a 4.8 and a 5.3 is the crank and rods, and the 4.8 has flat topped pistons and the 5.3 has dished unless it's an aluminium 5.3.
whitels1 is offline   Reply With Quote
Old 07-02-2012, 02:41 PM   #14
JNJchev77
Registered Cruiser
 
JNJchev77's Avatar
 
Join Date: Mar 2010
Location: Mesa, AZ
Posts: 918
Re: How can I tell the differense between 5.3 and a 4.8 liter LS motors

If you can't pull the head(s), pull the plug for cylinder one and with a small light, look inside and rotate the engine, manually until you can see the top of the piston. If it's dished (small lip), it a 5.3.... if it's flat it's a 4.8. Only way to tell! Just like whitels1 said...
__________________
77' Chevy SB
Dropmembered Front and Rear
5.3/4l60e combo
JNJchev77 is offline   Reply With Quote
Old 05-08-2016, 12:07 AM   #15
vettedad61
Registered User
 
Join Date: Nov 2010
Location: USA
Posts: 68
Re: How can I tell the differense between 5.3 and a 4.8 liter LS motors

There is a tab on the head gasket between the engine block and head, the tab is behind the exhaust manifold on both side of the engine... The tab on the head gasket is stamped 4.8 or 5.3.
vettedad61 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:39 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com