Getting ready for the Power Tour with a new seat. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stllookn · 03-11-2004, 09:56 PM

I put those into Orence1's truck. He is a big guy and he wanted them lowered so I took the die grinder to the brackets and removed them. It will lower the seats about 1-inch as I recall. I had to space them back up about 1/8 inch to make sure the slides would clear the carpet. The truck floor is not level but so I shim one corner another 1/8 inch. He had removed his gas tank so we had plenty of room behind the seats. They are nice. It was an easy install.

03-11-2004, 09:56 PM	#13
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	I put those into Orence1's truck. He is a big guy and he wanted them lowered so I took the die grinder to the brackets and removed them. It will lower the seats about 1-inch as I recall. I had to space them back up about 1/8 inch to make sure the slides would clear the carpet. The truck floor is not level but so I shim one corner another 1/8 inch. He had removed his gas tank so we had plenty of room behind the seats. They are nice. It was an easy install. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.