TX WTB: Dana 60 Coil Spring Rear End for 67 C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**wesmigletz** · 06-18-2016, 12:52 PM

WTB a Dana 60 Coil Spring rear end for my 1967 C10. I'm in the NE Dallas area, but I can drive a couple hours for the right rear end.

Thanks in advance.

Wes
(Eight one eight) 434-5264

**wesmigletz** · 06-19-2016, 06:35 PM

Ttt

**special-K** · 06-21-2016, 08:56 AM

A great unit, if you can find one. You'll be wanting to look at C1500s. Chevys didn't come with these, only GMC

**wesmigletz** · 06-21-2016, 09:07 AM

Quote:

Originally Posted by special-K

A great unit, if you can find one. You'll be wanting to look at C1500s. Chevys didn't come with these, only GMC

Thank you, I wasn't aware of them being in the GMCs. It will help with my search.

Wes

Steven R · 06-21-2016, 06:15 PM

I do have one but I live in canada most likely making this msg useless

but they do exist...

**wesmigletz** · 06-21-2016, 10:53 PM

Quote:

Originally Posted by Steven R

I do have one but I live in canada most likely making this msg useless

but they do exist...

Any idea what it would cost to ship to 75013?

ryans69chevy · 06-22-2016, 12:09 AM

Have you looked into just having one built for you? I called around to local shops to have mine rebuilt and a couple places actually told me it would be smarter to have one custom built for me since it would be about the same price.

I called around to see what it would cost for a custom built rear end and it was a few hundred dollars more to get one vs having mine rebuilt. It seemed worth it to me to just buy a new one. Just another option to check out!

**68bowtie** · 06-22-2016, 12:10 AM

my understanding is 1/2-ton big block c10's came with 6-lug dana 60's.

**wesmigletz** · 06-22-2016, 01:52 PM

Quote:

Originally Posted by ryans69chevy

Have you looked into just having one built for you? I called around to local shops to have mine rebuilt and a couple places actually told me it would be smarter to have one custom built for me since it would be about the same price.

I called around to see what it would cost for a custom built rear end and it was a few hundred dollars more to get one vs having mine rebuilt. It seemed worth it to me to just buy a new one. Just another option to check out!

I'm new to the area and not familiar with the local shops, but it is an option. I'd prefer to just find a bolt-in rear end if possible.

**wesmigletz** · 06-22-2016, 01:53 PM

Quote:

Originally Posted by 68bowtie

my understanding is 1/2-ton big block c10's came with 6-lug dana 60's.

Thank you for the heads-up.

Steven R · 06-22-2016, 09:16 PM

Question: Mine is a dana 60 for a coil suspension. but after looking up the frame and noticing it is a 3/4 ton 8 lug with 12 inch drums.

does this still fit what you are looking for.

sorry in advance if I got your hopes up for nothing

**wesmigletz** · 06-22-2016, 11:07 PM

Steven R, thanks for following up. Depending what it cost shipped, and if it is usable as is, it could work.

ryans69chevy · 06-23-2016, 06:45 PM

I bought my rear end assembly through Josh at American Powertrain which is Tennessee. I ordered a Dana 60 that's made for our c10's which will be a direct bolt in. They said it's as simple as unbolting the existing rear end, rolling it out of the way, and roll the new in and bolt it up!

**wesmigletz** · 06-23-2016, 10:05 PM

Quote:

Originally Posted by ryans69chevy

I bought my rear end assembly through Josh at American Powertrain which is Tennessee. I ordered a Dana 60 that's made for our c10's which will be a direct bolt in. They said it's as simple as unbolting the existing rear end, rolling it out of the way, and roll the new in and bolt it up!

I didn't see a Dana 60 on their site. DO you mind if I ask what it cost?

ryans69chevy · 06-24-2016, 03:08 PM

Yea I think you just have to call and talk to them. I couldn't find some stuff on their site either. I told them that their site is hard to use, but I also just have my phone for a computer so that might be why too. I paid 3300 for mine. I paid extra for mine to get the gear driven posi unit instead of the clutch style.

From my experience from calling around locally to have my original rebuilt was 2500-2800. I also called strange which their Dana 60 was gonna be about 2700 I think? But both times I called they were pretty rude - they didn't believe me that I had a coil spring rear end and the wait time to talk to someone was a long time. So I ruled them out from bad customer service even though they were the cheapest. I also called moser and some other companies. Basically I ruled it down to DTS customs and American Powertrain. DTS customs seemed very knowledgeable and good customer service and could do a Dana for 3000, but I decided to go with American Powertrain since every time I've called asking about transmissions and never bought anything they were always happy to talk to me and would answer any questions I had, didn't matter how long I talked.

You can call around and see who you like and want to go with and just to get pricing. I always asked for the gear driven posi which was always about 300-350 more so my prices might seem a little high. In my situation it just made sense for me to buy a new assembly.

Good luck! I should be getting my new assembly in a couple weeks so I can always let you know how it turned out and if it truly is a direct bolt in!

Steven R · 06-24-2016, 06:32 PM

I did some looking into shipping and looks like I would have to have a freight company ship it, that won't be cheap at all. i have to weight it on the pallet I plan to ship

What out of the axle are you wanting. the more I pull out or off the less it weighs and a little cheaper we make it.

it does not have any brake components left on it drums and pads are shot. do you want the gears and 8 lug axles?

here a link to the axle and a few pic when it was still on the frame. it will tell you what gears are in it. might have to copy and paste the link???

http://67-72chevytrucks.com/vboard/s...d.php?t=678104

let me know tks

06-18-2016, 12:52 PM	#1
wesmigletz Senior Member Join Date: Feb 2009 Location: Parker, Texas Posts: 685	WTB: Dana 60 Coil Spring Rear End for 67 C10 WTB a Dana 60 Coil Spring rear end for my 1967 C10. I'm in the NE Dallas area, but I can drive a couple hours for the right rear end. Thanks in advance. Wes (Eight one eight) 434-5264 __________________ 1970 2WD K5 1968 Camaro Conv 1967 Chevy SWB 1964 Malibu SS 1957 Corvette Pics www.picturetrail.com/wesmigletz

06-19-2016, 06:35 PM	#2
wesmigletz Senior Member Join Date: Feb 2009 Location: Parker, Texas Posts: 685	Re: WTB: Dana 60 Coil Spring Rear End for 67 C10 Ttt __________________ 1970 2WD K5 1968 Camaro Conv 1967 Chevy SWB 1964 Malibu SS 1957 Corvette Pics www.picturetrail.com/wesmigletz

06-21-2016, 08:56 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: WTB: Dana 60 Coil Spring Rear End for 67 C10 A great unit, if you can find one. You'll be wanting to look at C1500s. Chevys didn't come with these, only GMC __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-21-2016, 06:15 PM	#5
Steven R Registered User Join Date: Jul 2015 Location: landmark, MB Can Posts: 288	Re: WTB: Dana 60 Coil Spring Rear End for 67 C10 I do have one but I live in canada most likely making this msg useless but they do exist...

06-22-2016, 12:09 AM	#7
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: WTB: Dana 60 Coil Spring Rear End for 67 C10 Have you looked into just having one built for you? I called around to local shops to have mine rebuilt and a couple places actually told me it would be smarter to have one custom built for me since it would be about the same price. I called around to see what it would cost for a custom built rear end and it was a few hundred dollars more to get one vs having mine rebuilt. It seemed worth it to me to just buy a new one. Just another option to check out!

06-22-2016, 12:10 AM	#8
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,806	Re: WTB: Dana 60 Coil Spring Rear End for 67 C10 my understanding is 1/2-ton big block c10's came with 6-lug dana 60's. __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Thank you all so far you are angels!! Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

06-22-2016, 09:16 PM	#11
Steven R Registered User Join Date: Jul 2015 Location: landmark, MB Can Posts: 288	Re: WTB: Dana 60 Coil Spring Rear End for 67 C10 Question: Mine is a dana 60 for a coil suspension. but after looking up the frame and noticing it is a 3/4 ton 8 lug with 12 inch drums. does this still fit what you are looking for. sorry in advance if I got your hopes up for nothing

06-22-2016, 11:07 PM	#12
wesmigletz Senior Member Join Date: Feb 2009 Location: Parker, Texas Posts: 685	Re: WTB: Dana 60 Coil Spring Rear End for 67 C10 Steven R, thanks for following up. Depending what it cost shipped, and if it is usable as is, it could work. __________________ 1970 2WD K5 1968 Camaro Conv 1967 Chevy SWB 1964 Malibu SS 1957 Corvette Pics www.picturetrail.com/wesmigletz

06-23-2016, 06:45 PM	#13
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: WTB: Dana 60 Coil Spring Rear End for 67 C10 I bought my rear end assembly through Josh at American Powertrain which is Tennessee. I ordered a Dana 60 that's made for our c10's which will be a direct bolt in. They said it's as simple as unbolting the existing rear end, rolling it out of the way, and roll the new in and bolt it up!

06-24-2016, 03:08 PM	#15
ryans69chevy Registered User Join Date: Sep 2010 Location: Casselton, North Dakota 58012 Posts: 1,082	Re: WTB: Dana 60 Coil Spring Rear End for 67 C10 Yea I think you just have to call and talk to them. I couldn't find some stuff on their site either. I told them that their site is hard to use, but I also just have my phone for a computer so that might be why too. I paid 3300 for mine. I paid extra for mine to get the gear driven posi unit instead of the clutch style. From my experience from calling around locally to have my original rebuilt was 2500-2800. I also called strange which their Dana 60 was gonna be about 2700 I think? But both times I called they were pretty rude - they didn't believe me that I had a coil spring rear end and the wait time to talk to someone was a long time. So I ruled them out from bad customer service even though they were the cheapest. I also called moser and some other companies. Basically I ruled it down to DTS customs and American Powertrain. DTS customs seemed very knowledgeable and good customer service and could do a Dana for 3000, but I decided to go with American Powertrain since every time I've called asking about transmissions and never bought anything they were always happy to talk to me and would answer any questions I had, didn't matter how long I talked. You can call around and see who you like and want to go with and just to get pricing. I always asked for the gear driven posi which was always about 300-350 more so my prices might seem a little high. In my situation it just made sense for me to buy a new assembly. Good luck! I should be getting my new assembly in a couple weeks so I can always let you know how it turned out and if it truly is a direct bolt in!

06-24-2016, 06:32 PM	#16
Steven R Registered User Join Date: Jul 2015 Location: landmark, MB Can Posts: 288	Re: WTB: Dana 60 Coil Spring Rear End for 67 C10 I did some looking into shipping and looks like I would have to have a freight company ship it, that won't be cheap at all. i have to weight it on the pallet I plan to ship What out of the axle are you wanting. the more I pull out or off the less it weighs and a little cheaper we make it. it does not have any brake components left on it drums and pads are shot. do you want the gears and 8 lug axles? here a link to the axle and a few pic when it was still on the frame. it will tell you what gears are in it. might have to copy and paste the link??? http://67-72chevytrucks.com/vboard/s...d.php?t=678104 let me know tks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.