How are you mounting the slave Cly for hyd clutch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1970 CST Short Wide** · 06-22-2016, 09:12 PM

I'm running a LS1 and T56 six speed. Where are you guys mounting the slave cylinder for the clutch. Pics would be greatly appreciated

Thanks
Steve

sangell · 06-23-2016, 10:45 AM

Here is how I mounted the one on my son's truck. This is a 5.3/T-56 set up.

solidaxel · 06-23-2016, 05:53 PM

The master looks great, any pic of the slave on the bell housing, or are you using a Hyd. throw out bearing?

sangell · 06-23-2016, 06:04 PM

Hyd throw out bearing.

Edit: my bad, I just noticed you are asking for slave cyl mounting pics.

MalibuSSwagon · 06-24-2016, 09:13 AM

I believe everyone uses the stock arrangement of hydro throwout bearing for the T56 clutch slave.

sangell · 06-24-2016, 12:04 PM

I'm not sure how you would do a fork with outside slave setup on a t-56 as there are no provisions for a fork pivot etc. I'm sure it could be done but not sure why you would.

**1970 CST Short Wide** · 06-24-2016, 07:04 PM

Quote:

Originally Posted by sangell

Here is how I mounted the one on my son's truck. This is a 5.3/T-56 set up.

Exactly what I wanted to see. What year mak and model is that one off of
Thanks
Steve

06-22-2016, 09:12 PM	#1
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,192	How are you mounting the slave Cly for hyd clutch I'm running a LS1 and T56 six speed. Where are you guys mounting the slave cylinder for the clutch. Pics would be greatly appreciated Thanks Steve __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

06-23-2016, 10:45 AM	#2
sangell Registered User Join Date: Jun 2015 Location: Overland Park KS Posts: 173	Re: How are you mounting the slave Cly for hyd clutch Here is how I mounted the one on my son's truck. This is a 5.3/T-56 set up. Attached Images

06-23-2016, 05:53 PM	#3
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: How are you mounting the slave Cly for hyd clutch The master looks great, any pic of the slave on the bell housing, or are you using a Hyd. throw out bearing? __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

06-23-2016, 06:04 PM	#4
sangell Registered User Join Date: Jun 2015 Location: Overland Park KS Posts: 173	Re: How are you mounting the slave Cly for hyd clutch Hyd throw out bearing. Edit: my bad, I just noticed you are asking for slave cyl mounting pics.

06-24-2016, 09:13 AM	#5
MalibuSSwagon Registered User Join Date: Sep 2009 Location: Weare,NH Posts: 1,592	Re: How are you mounting the slave Cly for hyd clutch I believe everyone uses the stock arrangement of hydro throwout bearing for the T56 clutch slave. __________________ Eric 1992 Oldsmobile Custom Cruiser 1986 Chevrolet C10\|5.3L\|TKO600\|Shortbed\|Custom Deluxe 1983 Malibu Wagon\|TPI 305\|T5 5 speed\|3.73 non-posi

06-24-2016, 12:04 PM	#6
sangell Registered User Join Date: Jun 2015 Location: Overland Park KS Posts: 173	Re: How are you mounting the slave Cly for hyd clutch I'm not sure how you would do a fork with outside slave setup on a t-56 as there are no provisions for a fork pivot etc. I'm sure it could be done but not sure why you would.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.