The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-27-2016, 07:47 PM   #1
vince1
Registered User
 
Join Date: Jan 2013
Location: Calgary Alberta
Posts: 1,170
Grey I-6 What is it?

It is in my 66 Canadian built fleetside. This has to be the 230/250 or maybe even smaller 199? What vehicle did a grey engine originally come out in? If a 250 I would put in rings, bearings, gaskets and paint to blue. If a 230, maybe. The smaller one, no way. I'd like to know before lifting the engine. The truck has about 105k miles so still possibly the original. Thanks.
vince1 is offline   Reply With Quote
Old 06-27-2016, 08:33 PM   #2
aerotruk63
Check The Champ, Demonstrator
 
aerotruk63's Avatar
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
Re: Grey I-6 What is it?

Can you post the casting numbers?
I know your finger slipped, it's 194 which only came in the passenger car line up.
And your sure it's not a 292?
__________________
1963 Chevrolet Truck Literature
LINK: https://picasaweb.google.com/113840717762774560215

YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows.
https://www.youtube.com/results?sear...otruk63&page=1
aerotruk63 is offline   Reply With Quote
Old 06-27-2016, 09:18 PM   #3
TJ's Chevy
Registered User
 
TJ's Chevy's Avatar
 
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
Re: Grey I-6 What is it?

230's and 250's were painted blue.
292's were green.

Pull a spark plug and look at the piston. If the piston is Flat Top then you have a 230. If it is dished you have a 250.

If you have a 292 the engine will have 6 inch side covers.

230/250 has 4 inch side covers.
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643
1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056
My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw
TJ's Chevy is offline   Reply With Quote
Old 06-27-2016, 09:39 PM   #4
aerotruk63
Check The Champ, Demonstrator
 
aerotruk63's Avatar
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
Re: Grey I-6 What is it?

Canadian and American engines were not always painted the same, have to be careful.
__________________
1963 Chevrolet Truck Literature
LINK: https://picasaweb.google.com/113840717762774560215

YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows.
https://www.youtube.com/results?sear...otruk63&page=1
aerotruk63 is offline   Reply With Quote
Old 06-27-2016, 10:38 PM   #5
vince1
Registered User
 
Join Date: Jan 2013
Location: Calgary Alberta
Posts: 1,170
Re: Grey I-6 What is it?

Yeah just got back in and no luck with the flashlight but sliding a long Robertson #2 across the top showed a raised portion at the back 1/2" of the piston. I guess I can call it a 250.

I was thinking the same that maybe Canadian built trucks got painted differently. I'll have to think of trading in my can of blue for grey. Any truth to the rumour some of these trucks were also built in Saskatchewan?
vince1 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:22 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com