WA Factory rear slider? You tell me $250 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 07-29-2016, 04:58 PM

Plus Shipping

I removed this about 1990 and put it in my attic, I think it's factory but not sure, I posted a question in the talk section and someone said they were GM vendor installed. You tell me. Here are some pics. Glass itched similar to our factory windows but different name, etc. Sliding channel felt is like the side windows in the rear.

bluek5 · 07-29-2016, 05:12 PM

The slider is the same as the one in a 72 I have. I bought it from the original owners granddaughter. Truck was very original, I even have the tailgate that was removed when the truck was new for the addition of a camper.

*randy500* · 07-29-2016, 05:17 PM

Cool, thanks for the pic of the SPID and the information. I thought it was original but back then didn't pay much attention to the glovebox sticker.

jr1000yarder · 07-29-2016, 06:37 PM

My 69 has a metal latch

**special-K** · 07-29-2016, 08:33 PM

I'm not sure year to year, but I know '72s used that latch and it's the same latch used in K/5 sliding side windows through '91.

*randy500* · 07-29-2016, 10:12 PM

Lots of info here, I appreciate it. So your saying the plastic latch is blazer till '91.

I have had these before and thought they had the metal latch too...maybe an earlier one?

**DeadheadNM** · 07-29-2016, 11:54 PM

Metal latch is original for an OEM slider and the period correct first gen double pane slider windows I have also have metal latches. The plastic latch is likely a replacement but slider looks to be correct. Here's an example of what the metal latch would look like http://67-72chevytrucks.com/vboard/s...hlight=Sliding

If the frame pieces at the bottom corners are not welded together but affixed with screws that supports a factory slider as does the etching you show in the pic. See pics of an OEM example here http://67-72chevytrucks.com/vboard/s...7&postcount=10

bluek5 · 08-04-2016, 01:54 PM

Quote:

Originally Posted by DeadheadNM

Metal latch is original for an OEM slider and the period correct first gen double pane slider windows I have also have metal latches. The plastic latch is likely a replacement but slider looks to be correct. Here's an example of what the metal latch would look like http://67-72chevytrucks.com/vboard/s...hlight=Sliding

If the frame pieces at the bottom corners are not welded together but affixed with screws that supports a factory slider as does the etching you show in the pic. See pics of an OEM example here http://67-72chevytrucks.com/vboard/s...7&postcount=10

The latch is the same as the one in my 72. Would like to have the slider. Someone drilled holes in mine for a gun rack. You would have to be very flexible on the price though. Good luck with your sale.

*randy500* · 08-04-2016, 02:28 PM

Thanks for the info, if your interested then make an offer! Please make it plus shipping so I know what I will be getting for it. I have a UPS account and shipping hasn't been outrageous so far. I also picked up another truck last weekend with the same slider and its on the SPID...

**DeadheadNM** · 08-04-2016, 10:42 PM

If I'm wrong I apologize but I made use of several OEM sliders when I rebuilt one and they catch my attention when posted as I like them. I've got one in the k20 and put one in the k1500 both w metal latches and the blazer sliders have the same as I mentioned. The original slider in the k20 was beat up badly and the NM sun is very harsh - it did have a black plastic latch though. Given the abuse the window suffered I have a hard time believing it was OEM over a replacement piece. I will follow posts and collect examples pics of sliders in an attempt to clarify the issue.

Black metal latches are available and Southco still makes what looks to be plastic examples http://www.southco.com/en-us/07/07-10-201-12

Its not uncommon to see sliders listed as OEM that are close matches but not OEM.

**DeadheadNM** · 08-04-2016, 11:31 PM

Metal example

*randy500* · 08-04-2016, 11:47 PM

Quote:

Originally Posted by DeadheadNM

Metal example

Thanks for the info...I like the chevy's in the background...what happened to all the tail light lenses?

**DeadheadNM** · 08-05-2016, 08:48 PM

Quote:

Originally Posted by randy500

Thanks for the info...I like the chevy's in the background...what happened to all the tail light lenses?

Not mine - pic of a slider I bought from another member. Sorry to hijack your thread btw!

07-29-2016, 04:58 PM	#1
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Factory rear slider? You tell me $250 Plus Shipping I removed this about 1990 and put it in my attic, I think it's factory but not sure, I posted a question in the talk section and someone said they were GM vendor installed. You tell me. Here are some pics. Glass itched similar to our factory windows but different name, etc. Sliding channel felt is like the side windows in the rear. Last edited by randy500; 07-29-2016 at 05:02 PM. Reason: added picture

07-29-2016, 05:12 PM	#2
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: Factory rear slider? You tell me $250 The slider is the same as the one in a 72 I have. I bought it from the original owners granddaughter. Truck was very original, I even have the tailgate that was removed when the truck was new for the addition of a camper. Attached Images

07-29-2016, 05:17 PM	#3
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Factory rear slider? You tell me $250 Cool, thanks for the pic of the SPID and the information. I thought it was original but back then didn't pay much attention to the glovebox sticker.

07-29-2016, 06:37 PM	#4
jr1000yarder Registered User Join Date: May 2016 Location: Pa Posts: 1,278	Re: Factory rear slider? You tell me $250 My 69 has a metal latch __________________ IT IS WHAT IT IS

07-29-2016, 08:33 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Factory rear slider? You tell me $250 I'm not sure year to year, but I know '72s used that latch and it's the same latch used in K/5 sliding side windows through '91. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-29-2016, 10:12 PM	#6
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Factory rear slider? You tell me $250 Lots of info here, I appreciate it. So your saying the plastic latch is blazer till '91. I have had these before and thought they had the metal latch too...maybe an earlier one?

07-29-2016, 11:54 PM	#7
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,453	Re: Factory rear slider? You tell me $250 Metal latch is original for an OEM slider and the period correct first gen double pane slider windows I have also have metal latches. The plastic latch is likely a replacement but slider looks to be correct. Here's an example of what the metal latch would look like http://67-72chevytrucks.com/vboard/s...hlight=Sliding If the frame pieces at the bottom corners are not welded together but affixed with screws that supports a factory slider as does the etching you show in the pic. See pics of an OEM example here http://67-72chevytrucks.com/vboard/s...7&postcount=10 __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland Last edited by DeadheadNM; 07-30-2016 at 12:31 AM. Reason: Added info

08-04-2016, 02:28 PM	#9
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Factory rear slider? You tell me $250 Thanks for the info, if your interested then make an offer! Please make it plus shipping so I know what I will be getting for it. I have a UPS account and shipping hasn't been outrageous so far. I also picked up another truck last weekend with the same slider and its on the SPID...

08-04-2016, 10:42 PM	#10
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,453	Re: Factory rear slider? You tell me $250 If I'm wrong I apologize but I made use of several OEM sliders when I rebuilt one and they catch my attention when posted as I like them. I've got one in the k20 and put one in the k1500 both w metal latches and the blazer sliders have the same as I mentioned. The original slider in the k20 was beat up badly and the NM sun is very harsh - it did have a black plastic latch though. Given the abuse the window suffered I have a hard time believing it was OEM over a replacement piece. I will follow posts and collect examples pics of sliders in an attempt to clarify the issue. Black metal latches are available and Southco still makes what looks to be plastic examples http://www.southco.com/en-us/07/07-10-201-12 Its not uncommon to see sliders listed as OEM that are close matches but not OEM. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland Last edited by DeadheadNM; 08-04-2016 at 11:27 PM. Reason: Added info

08-04-2016, 11:31 PM	#11
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,453	Re: Factory rear slider? You tell me $250 Metal example Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.