The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-17-2016, 11:07 AM   #1
superdav
Registered User
 
Join Date: May 2016
Location: Arkansas
Posts: 200
Does anybody make -2 inch spindles for 1 inch rotors?

Or do I have to convert to heavy duty brakes?
superdav is offline   Reply With Quote
Old 08-17-2016, 11:17 AM   #2
JWall
Frequent Flyer
 
JWall's Avatar
 
Join Date: Aug 2009
Location: Tulsa, OK
Posts: 2,258
Re: Does anybody make -2 inch spindles for 1 inch rotors?

I thought BellTech did but they offer a 3" spindle for a 1" rotor...
http://www.belltech.com/products/bel...set-14013.html
__________________
- Justin
76 SWB C-10 - 98 SWB C1500 (x2)
1 Owner 1976 SWB
JWall is offline   Reply With Quote
Old 08-17-2016, 11:28 AM   #3
ultrahd4me
Registered User
 
ultrahd4me's Avatar
 
Join Date: Dec 2006
Location: Gallatin, Tn
Posts: 676
Re: Does anybody make -2 inch spindles for 1 inch rotors?

No 2" modular spindles for 1" rotors, but several options for 2-1/2" or 3" drop spindles.
__________________
Follow me on Instagram: @midtennc10
Youtube channel: Midtennc10
ultrahd4me is offline   Reply With Quote
Old 08-17-2016, 05:42 PM   #4
superdav
Registered User
 
Join Date: May 2016
Location: Arkansas
Posts: 200
Re: Does anybody make -2 inch spindles for 1 inch rotors?

Im ready to order a bunch of parts
I want a 2/2 drop and I could care less which brakes but I really don't want to have to swap everything over. The truck has calipers and rotors that don't have many miles on them and I don't know what has to be swapped on the rear for brakes. Ill have to look into it but even the brake hoses have different part numbers.
I found 1 set this morning but I can't find them again. I should have saved a link but the amazon ad didn't look very professional
superdav is offline   Reply With Quote
Old 08-17-2016, 06:02 PM   #5
ultrahd4me
Registered User
 
ultrahd4me's Avatar
 
Join Date: Dec 2006
Location: Gallatin, Tn
Posts: 676
Re: Does anybody make -2 inch spindles for 1 inch rotors?

If I'm understanding your post correctly, you're want a 2" drop front and rear. If so, I would keep your stock spindle and go with a 2" drop spring up front, and a 2" lowering shackle on the rear. Summit racing will have everything you need. Another cheap option is to cut one round off your stock coils and you will get about 2" of drop also.
__________________
Follow me on Instagram: @midtennc10
Youtube channel: Midtennc10
ultrahd4me is offline   Reply With Quote
Old 08-17-2016, 06:42 PM   #6
superdav
Registered User
 
Join Date: May 2016
Location: Arkansas
Posts: 200
Re: Does anybody make -2 inch spindles for 1 inch rotors?

Quote:
Originally Posted by ultrahd4me View Post
If I'm understanding your post correctly, you're want a 2" drop front and rear. If so, I would keep your stock spindle and go with a 2" drop spring up front, and a 2" lowering shackle on the rear. Summit racing will have everything you need. Another cheap option is to cut one round off your stock coils and you will get about 2" of drop also.
That is exactly what I want, I want to keep the rake. I've been told by some not to use springs but as I've never lowered any of my trucks so I only know what others tell me about lowering but now the springs seem to be the best choice
superdav is offline   Reply With Quote
Old 08-17-2016, 06:56 PM   #7
bbbc10
Diggin The SquareLife
 
Join Date: Dec 2010
Location: garland,tx
Posts: 1,933
Re: Does anybody make -2 inch spindles for 1 inch rotors?

Go with spindles over springs always.....spindles will lower your body an springs will lower your suspension....an jus get some 2" shackles for the rear
bbbc10 is offline   Reply With Quote
Old 08-18-2016, 12:59 PM   #8
MalibuSSwagon
Registered User
 
Join Date: Sep 2009
Location: Weare,NH
Posts: 1,592
Re: Does anybody make -2 inch spindles for 1 inch rotors?

Western Chassis has 2.5" drop spindles for 1" rotors.
MalibuSSwagon is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:47 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com