Anyone put buddy buckets as a rear seat? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**mrtoni** · 08-16-2016, 08:37 PM

Like the title says, has anybody mounted a set of buddy buckets in the rear position for a blazer or second row suburban? Just curious as to fitment. Matt in Reno

mgkgmc · 08-17-2016, 09:32 AM

I have a buddy bucket set and a Jimmy I'll see how the frame fits later today.

ls1nova71 · 08-17-2016, 10:33 AM

No way it will fit between the wheel wells......

71meangreenc10 · 08-17-2016, 11:40 AM

Quote:

Originally Posted by ls1nova71

No way it will fit between the wheel wells......

Agreed ^^^^^

Smitty

**mrtoni** · 08-17-2016, 05:28 PM

thanks, Matt

71meangreenc10 · 08-17-2016, 10:54 PM

If you just take the seats without the middle seat and fab up your mounts, it could work. But the whole three pieces I just don't see it fitting. If you do decide to fab, I would go with a newer seat with reclining to be more comfortable. I made my own seats for my Burb using the frame from the middle seat and fabbing up the front frame. It works.

Smitty

mgkgmc · 08-18-2016, 09:25 AM

Thanks I was too busy to check it out but I'll measure anyways

cleszkie · 08-18-2016, 12:34 PM

Quote:

Originally Posted by 71meangreenc10

If you just take the seats without the middle seat and fab up your mounts, it could work. But the whole three pieces I just don't see it fitting. If you do decide to fab, I would go with a newer seat with reclining to be more comfortable. I made my own seats for my Burb using the frame from the middle seat and fabbing up the front frame. It works.

Smitty

If you go through the trouble to remove the center console/seat, you might as well just install a stock bench seat.

71meangreenc10 · 08-19-2016, 01:33 PM

Quote:

Originally Posted by cleszkie

If you go through the trouble to remove the center console/seat, you might as well just install a stock bench seat.

Stock bench seat will not fit in that location without lots of work. If you look at what the OP asked for, I was suggesting modification if he wanted buckets in the back of the blazer.

Just like I mentioned, I put my own preferred seats in my Blazer, Burb and GMC because the stock ones are not for me.....

Smitty

cleszkie · 08-22-2016, 01:10 PM

Quote:

Originally Posted by 71meangreenc10

Stock bench seat will not fit in that location without lots of work. If you look at what the OP asked for, I was suggesting modification if he wanted buckets in the back of the blazer.

Just like I mentioned, I put my own preferred seats in my Blazer, Burb and GMC because the stock ones are not for me.....

Smitty

I meant a stock Blazer rear bench seat.

08-16-2016, 08:37 PM	#1
mrtoni Senior Member Join Date: Jan 2009 Location: sparks, nevada Posts: 1,881	Anyone put buddy buckets as a rear seat? Like the title says, has anybody mounted a set of buddy buckets in the rear position for a blazer or second row suburban? Just curious as to fitment. Matt in Reno

08-17-2016, 09:32 AM	#2
mgkgmc Registered User Join Date: Dec 2007 Location: Glendale Arizona Posts: 1,355	Re: Anyone put buddy buckets as a rear seat? I have a buddy bucket set and a Jimmy I'll see how the frame fits later today. __________________ 1970 GMC 1500 stepside 1972 GMC Jimmy Custom 2004 Chevy Colorado 1989 Swb Silverado 1972 Aj's Stormer

08-17-2016, 10:33 AM	#3
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: Anyone put buddy buckets as a rear seat? No way it will fit between the wheel wells...... __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

08-17-2016, 05:28 PM	#5
mrtoni Senior Member Join Date: Jan 2009 Location: sparks, nevada Posts: 1,881	Re: Anyone put buddy buckets as a rear seat? thanks, Matt

08-17-2016, 10:54 PM	#6
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: Anyone put buddy buckets as a rear seat? If you just take the seats without the middle seat and fab up your mounts, it could work. But the whole three pieces I just don't see it fitting. If you do decide to fab, I would go with a newer seat with reclining to be more comfortable. I made my own seats for my Burb using the frame from the middle seat and fabbing up the front frame. It works. Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

08-18-2016, 09:25 AM	#7
mgkgmc Registered User Join Date: Dec 2007 Location: Glendale Arizona Posts: 1,355	Re: Anyone put buddy buckets as a rear seat? Thanks I was too busy to check it out but I'll measure anyways __________________ 1970 GMC 1500 stepside 1972 GMC Jimmy Custom 2004 Chevy Colorado 1989 Swb Silverado 1972 Aj's Stormer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.