The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-04-2016, 08:49 PM   #2
wildwilly4x4
Registered User
 
Join Date: Aug 2009
Location: Sunray,TX
Posts: 251
Re: 205 transfer case to 4L80E?

Do some searching and you will find the answer your after, as its covered fairly often. You have the wrong tcase for a 4l80 swap, but it can be modded to fit. This will require the input bearing bore to be enlarged and a 32 spline input gear. Then you will need to buy an aftermarket adapter. There is possibly and adapter to mate the 80e shaft to your 205, but if there is, Im not familiar with it. To mate is to the 700r4 or 4l60e wont be a huge problem, but you will still need a few aftermarket pieces to set it up.
wildwilly4x4 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com