The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-02-2016, 01:41 PM   #1
NC_John
Registered User
 
NC_John's Avatar
 
Join Date: Jul 2013
Location: Rockwell, NC
Posts: 1,639
5.3 LM7 - yay or nay?

I'm checking out a 2001 5.3 LM7 tomorrow. 80K miles, still in truck, running.

I'm looking to build something (eventually up to) 400 or so HP. Maybe boost it later. Since I am swapping this into my '70, I'll have too much money in the swap right now to do much performance-wise immediately so a lot of the performance stuff will be added later.

I know the 2005 and later LS's have a few upgrades but if this one looks good, is complete and the price is right, is there any reason why I wouldn't want it?

I'm trying to research this as much as possible but its information overload and all the different LS configurations make it really confusing.

thanks
__________________
1970 C-10 LWB "Blu"

Instagram (current build pictures) 70_nc_c10
NC_John is offline   Reply With Quote
Old 09-02-2016, 02:17 PM   #2
tinydb84
Registered User
 
tinydb84's Avatar
 
Join Date: Jul 2009
Location: San Jose Ca
Posts: 2,871
Re: 5.3 LM7 - yay or nay?

I have a 2003 LM7 that is in my 75. Not running yet. I am either going to boost it or port the heads and change out the pistons to give it a bit more power.

The newer engines have better rods and there are some other 5.3's with better heads but all and all I haven't heard of anyone being disappointed with their LM7's.
__________________
David
Used parts build: http://67-72chevytrucks.com/vboard/s...d.php?t=638991
My brother's Nova: http://www.67-72chevytrucks.com/vboa...d.php?t=727985
Rear suspension rework: http://www.67-72chevytrucks.com/vboa...d.php?t=750557
Instagram: myfabguy
tinydb84 is offline   Reply With Quote
Old 09-02-2016, 02:38 PM   #3
NC_John
Registered User
 
NC_John's Avatar
 
Join Date: Jul 2013
Location: Rockwell, NC
Posts: 1,639
Re: 5.3 LM7 - yay or nay?

Quote:
Originally Posted by tinydb84 View Post
I have a 2003 LM7 that is in my 75. Not running yet. I am either going to boost it or port the heads and change out the pistons to give it a bit more power.

The newer engines have better rods and there are some other 5.3's with better heads but all and all I haven't heard of anyone being disappointed with their LM7's.
I knew about the rods, but those will end up getting changed eventually anyway, especially if I go stroker.

thanks for the input
__________________
1970 C-10 LWB "Blu"

Instagram (current build pictures) 70_nc_c10
NC_John is offline   Reply With Quote
Old 09-02-2016, 08:38 PM   #4
clinebarger
Senior Member
 
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
Re: 5.3 LM7 - yay or nay?

5.3L's are great reliable engines. For a N/A performance build.....Go 6.0L, 4.00" bore engines are way easier to get 400hp out of compared to a 3.78" bore 5.3L/4.8L.

If you Boost it.....The bore size is not near as crippling, Just keep in mind that there is more too it than a cheap Turbo & some piping.....A good fuel system can easily run over a grand.

As for Later engines being better than Early ones......I had a stock bottom end '98 LS1 topped with a Magnacharger MP1900 in a '50 Studebaker Pick-up, I beat the snot out of the motor for years at 15 psi (Smaller Pulley) & could not break it!! The 2 most important things I did was the Fuel System (Aeromotive A1000 pump, 43# Injectors, #8 Lines) & a GOOD Tune!
clinebarger is offline   Reply With Quote
Old 09-03-2016, 08:14 PM   #5
NC_John
Registered User
 
NC_John's Avatar
 
Join Date: Jul 2013
Location: Rockwell, NC
Posts: 1,639
Re: 5.3 LM7 - yay or nay?

Quote:
Originally Posted by clinebarger View Post
5.3L's are great reliable engines. For a N/A performance build.....Go 6.0L, 4.00" bore engines are way easier to get 400hp out of compared to a 3.78" bore 5.3L/4.8L.

If you Boost it.....The bore size is not near as crippling, Just keep in mind that there is more too it than a cheap Turbo & some piping.....A good fuel system can easily run over a grand.

As for Later engines being better than Early ones......I had a stock bottom end '98 LS1 topped with a Magnacharger MP1900 in a '50 Studebaker Pick-up, I beat the snot out of the motor for years at 15 psi (Smaller Pulley) & could not break it!! The 2 most important things I did was the Fuel System (Aeromotive A1000 pump, 43# Injectors, #8 Lines) & a GOOD Tune!
I've got to spend a LOT more money around here to get into a 6.0 that doesn't have 300K on the clock compared to a 5.3.

The one I looked at today was a bust. It was not the original engine in the truck, the seller said HE was told it was only 80K. It looked pretty greasy for only 80K. The truck originally had a 4.8 and the seller couldn't prove it was replaced with a 5.3 (4.8's are fine but worth a lot less). The final nail was I was told it was running. When I got there he told me that he sold the gas tank and I couldn't hear it run. I walked. Too many inconsistencies.
__________________
1970 C-10 LWB "Blu"

Instagram (current build pictures) 70_nc_c10
NC_John is offline   Reply With Quote
Old 09-03-2016, 10:49 PM   #6
Heavymetl
Registered User
 
Join Date: Feb 2012
Location: Southern Ohio
Posts: 292
Re: 5.3 LM7 - yay or nay?

Just went to the track on Thursday, my buddies tuned Lm7 swapped Chevelle ran 13.61@98mph, bone stock with headers.

Not bad for a full weight 1970 Chevelle with 3.90 gears on Drag Radials. A set of headers and a tune does wonders for those things. Not 400hp, but not a total slug either.
__________________
1970 C10
Turbo LM7 5.3/LS6 cam
PT7675/4L80E/Holley Dominator EFI/E85
Moser 9" 3.25/4 wheel discs
11.16@121.07
Heavymetl is offline   Reply With Quote
Old 09-04-2016, 06:09 AM   #7
NC_John
Registered User
 
NC_John's Avatar
 
Join Date: Jul 2013
Location: Rockwell, NC
Posts: 1,639
Re: 5.3 LM7 - yay or nay?

Quote:
Originally Posted by Heavymetl View Post
Just went to the track on Thursday, my buddies tuned Lm7 swapped Chevelle ran 13.61@98mph, bone stock with headers.

Not bad for a full weight 1970 Chevelle with 3.90 gears on Drag Radials. A set of headers and a tune does wonders for those things. Not 400hp, but not a total slug either.
I guess my goal of 400 hp isn't really on the mark. What I really need is to build something with diesel like torque to get this truck hustling. That was where I missed the mark with the current Gen 1. I built it for all upper end power and I have to launch it like a prostock on an incline to get it moving, even with the 4.56 rear. It was great watching the guy try to get it on and off the alignment rack. He had to get the rpm up way too high to get the truck moving but was terrified he was going to launch it. Let's just say the novelty of all that has worn off and I want something a little more driveable.

I might start looking a little harder for a 6.0. BUT- the "test 2" motor in this magazine build is some pretty serious power for an all stock bottom end.

http://www.trucktrend.com/how-to/eng...-mild-to-wild/
__________________
1970 C-10 LWB "Blu"

Instagram (current build pictures) 70_nc_c10
NC_John is offline   Reply With Quote
Old 09-04-2016, 06:24 AM   #8
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,670
Re: 5.3 LM7 - yay or nay?

If you've never read this its worth reading..http://www.hotrod.com/articles/hrdp-...g-bang-theory/
mongocanfly is offline   Reply With Quote
Old 09-04-2016, 02:24 PM   #9
Advanced Design
Senior Member
 
Advanced Design's Avatar
 
Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,028
Re: 5.3 LM7 - yay or nay?

I remember when that article came out ..... and the surprise ending was very interesting.
Advanced Design is offline   Reply With Quote
Old 09-04-2016, 03:16 PM   #10
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,670
Re: 5.3 LM7 - yay or nay?

Ive got a bone stock LQ9 6.0 with headers in mine..on the dyno it put out 346hp..they said they could turn it up more if I wanted but decided to just leave it there..they said a cam and head swap would take it over 400 easily.. I gave around 1600 3 years ago for the complete 6.0 engine but I know their higher now..but I can still buy complete 5.3s all day for around 800 locally
mongocanfly is offline   Reply With Quote
Old 09-04-2016, 10:28 PM   #11
clinebarger
Senior Member
 
Join Date: May 2009
Location: Fort Worth, TX
Posts: 6,370
Re: 5.3 LM7 - yay or nay?

Quote:
Originally Posted by NC_John View Post
I guess my goal of 400 hp isn't really on the mark. What I really need is to build something with diesel like torque to get this truck hustling. That was where I missed the mark with the current Gen 1. I built it for all upper end power and I have to launch it like a prostock on an incline to get it moving, even with the 4.56 rear. It was great watching the guy try to get it on and off the alignment rack. He had to get the rpm up way too high to get the truck moving but was terrified he was going to launch it. Let's just say the novelty of all that has worn off and I want something a little more driveable.

I might start looking a little harder for a 6.0. BUT- the "test 2" motor in this magazine build is some pretty serious power for an all stock bottom end.

http://www.trucktrend.com/how-to/eng...-mild-to-wild/
A mild cam 5.3L with a 2500 Stall will probably put a big smile on your face.

Engine dyno numbers don't mean much too me, Chassis dyno numbers mean a lot more....But then again those can off also compared too how the vehicle feels on the street.
clinebarger is offline   Reply With Quote
Old 09-05-2016, 06:19 PM   #12
NC_John
Registered User
 
NC_John's Avatar
 
Join Date: Jul 2013
Location: Rockwell, NC
Posts: 1,639
Re: 5.3 LM7 - yay or nay?

Quote:
Originally Posted by clinebarger View Post
A mild cam 5.3L with a 2500 Stall will probably put a big smile on your face.

Engine dyno numbers don't mean much too me, Chassis dyno numbers mean a lot more....But then again those can off also compared too how the vehicle feels on the street.
Even better than 2,500 stall. I've got a tremec 6-spd and a 4.56 posi rear-end.....
__________________
1970 C-10 LWB "Blu"

Instagram (current build pictures) 70_nc_c10
NC_John is offline   Reply With Quote
Old 09-05-2016, 06:20 PM   #13
NC_John
Registered User
 
NC_John's Avatar
 
Join Date: Jul 2013
Location: Rockwell, NC
Posts: 1,639
Re: 5.3 LM7 - yay or nay?

Quote:
Originally Posted by mongocanfly View Post
Ive got a bone stock LQ9 6.0 with headers in mine..on the dyno it put out 346hp..they said they could turn it up more if I wanted but decided to just leave it there..they said a cam and head swap would take it over 400 easily.. I gave around 1600 3 years ago for the complete 6.0 engine but I know their higher now..but I can still buy complete 5.3s all day for around 800 locally
That sounds like a nice little power plant. 5.3's around here for that money have 200-400K miles.
__________________
1970 C-10 LWB "Blu"

Instagram (current build pictures) 70_nc_c10
NC_John is offline   Reply With Quote
Old 09-05-2016, 10:10 PM   #14
Zoomad75
K5Camper
 
Zoomad75's Avatar
 
Join Date: Mar 2004
Location: Pueblo, CO
Posts: 1,513
Re: 5.3 LM7 - yay or nay?

Worth it. I'm now into the tuning stages on my LM7 swap. Night and day difference to carb'd 350's. It starts with one twist of the key, runs right up to redline without hesitation and beginning to get decent fuel mileage for something shaped like a barn with 35" tires twisted by 4.10 gears. I'm up to 12.12 mpg right now and I haven't hooked up the wiriing for the TCC yet in the trans so it should go up a little more. Still, I'm wanting more mpg, but it's going to be tight to tune it in. Time will tell.

Is it worth it to do? I'd say yes. It's not a budget kind of project to tackle though. You can do it on the cheap, like buying a boneyard engine but you'll have to spend money where it counts. I know lots do the stock harness, but the best money spent on the swap is getting a GOOD stand alone harness to run with the stock ECM. Howell has some great stuff in this department and they don't break the bank. Mine is a Howell harness. Nothing will make you want to tear your hair out faster than the LS sitting in the engine bay and you can't make it crank because of some wire you forgot to clip or clipped the wrong one. The Howell guys can do the base tune and elminate garbage like the passlock security BS and torque management.

It's not a cheap replacment for a good running small block. But if you want to modernize your ride and get better driveability, it's one hell of a way to do it.
__________________
Rob Z.
1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP
1991 K5 8.1L/NV4500/241/D44/14b FWC Camper
Zoomad75 is offline   Reply With Quote
Old 09-06-2016, 04:53 AM   #15
LeesTruk
Registered User
 
Join Date: Mar 2015
Location: Manchester, CT
Posts: 433
Re: 5.3 LM7 - yay or nay?

I'm running a set-up similar to what Cline describes (5.3L w/Brian Tooley stg.1 cam and I6 Trail Blazer torque convertor(2200-2600 stall)) in my '80 C10. What a great combo. The truck will putt around town comfortably, fly when you get "stupid" with the gas pedal, and give 19mpg (hiway) @70-75mph. It's like having the best of all worlds in one package. Yes, it does come at a greater cost than the sbc swap, but there is no comparison on the final outcome. And yes, just as Cline says, it will put a smile on your face =>
LeesTruk is offline   Reply With Quote
Old 09-06-2016, 05:45 PM   #16
Heavymetl
Registered User
 
Join Date: Feb 2012
Location: Southern Ohio
Posts: 292
Re: 5.3 LM7 - yay or nay?

Quote:
Originally Posted by Zoomad75 View Post
Worth it. I'm now into the tuning stages on my LM7 swap. Night and day difference to carb'd 350's. It starts with one twist of the key, runs right up to redline without hesitation and beginning to get decent fuel mileage for something shaped like a barn with 35" tires twisted by 4.10 gears. I'm up to 12.12 mpg right now and I haven't hooked up the wiriing for the TCC yet in the trans so it should go up a little more. Still, I'm wanting more mpg, but it's going to be tight to tune it in. Time will tell.

Is it worth it to do? I'd say yes. It's not a budget kind of project to tackle though. You can do it on the cheap, like buying a boneyard engine but you'll have to spend money where it counts. I know lots do the stock harness, but the best money spent on the swap is getting a GOOD stand alone harness to run with the stock ECM. Howell has some great stuff in this department and they don't break the bank. Mine is a Howell harness. Nothing will make you want to tear your hair out faster than the LS sitting in the engine bay and you can't make it crank because of some wire you forgot to clip or clipped the wrong one. The Howell guys can do the base tune and elminate garbage like the passlock security BS and torque management.

It's not a cheap replacment for a good running small block. But if you want to modernize your ride and get better driveability, it's one hell of a way to do it.

Most tuners set up the engine to run "closed loop", so it's using feedback from the O2 sensors to run at Lambda 1 (14.7 AFR gas) at cruise. Because of that, there's really not much to tune into an engine for better fuel mileage. That being said, it is possible to set one up "Open Loop" and dial in a lean cruise condition during low-load situations. But that's really splitting hairs for a vehicle that more for fun than squeaking out every bit of mileage daily driving a commute.
__________________
1970 C10
Turbo LM7 5.3/LS6 cam
PT7675/4L80E/Holley Dominator EFI/E85
Moser 9" 3.25/4 wheel discs
11.16@121.07
Heavymetl is offline   Reply With Quote
Old 09-07-2016, 06:39 AM   #17
NC_John
Registered User
 
NC_John's Avatar
 
Join Date: Jul 2013
Location: Rockwell, NC
Posts: 1,639
Re: 5.3 LM7 - yay or nay?

I'm checking out another 5.3 this afternoon. Leaned towards a 6.0 for a bit (and would still like one) but the price is good on this one so if everything else looks good I'll pull the trigger.

There's actually no question as to whether or not I want to go LS. I've owned several LS's... They were just always in the original (late model) vehicle. In fact, there is a '15 5.3 under the hood of a Tahoe in the driveway but my wife won't let me have it. They are great engines.

The real question was go after a garden variety LM7 or try to hold out for something a little sexier? Just like the LWB vs SWB dilemma during the original purchase of the truck.....I guess I'll know what I want when I see it.
__________________
1970 C-10 LWB "Blu"

Instagram (current build pictures) 70_nc_c10
NC_John is offline   Reply With Quote
Old 09-19-2016, 02:22 AM   #18
Cjcolbyjack
Registered User
 
Join Date: Jun 2016
Location: kennedale
Posts: 103
Re: 5.3 LM7 - yay or nay?

Look for a place like lonstaronlineauctions. That have auctions for your local impound. Public auction. I just picked up a 2000 escalade 6.0 awd for $700 total price. 170k. It was rolled. The guys that look at those auctions are looking for cars to fix. Not the ones completely trashed. I also just picked up a 05 awd Lincoln aviator with 100k for 1100. I'm gonna set my 54 right on top and be done.
__________________
51 motor buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=718113.

54 3600 Lincoln aviator chassis swap
http://67-72chevytrucks.com/vboard/s...d.php?t=717927
Cjcolbyjack is offline   Reply With Quote
Old 09-19-2016, 04:19 PM   #19
Cjcolbyjack
Registered User
 
Join Date: Jun 2016
Location: kennedale
Posts: 103
Re: 5.3 LM7 - yay or nay?

This should answer all your questions
http://www.stevesnovasite.com/forums...d.php?t=115983
__________________
51 motor buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=718113.

54 3600 Lincoln aviator chassis swap
http://67-72chevytrucks.com/vboard/s...d.php?t=717927
Cjcolbyjack is offline   Reply With Quote
Old 09-20-2016, 11:46 AM   #20
NC_John
Registered User
 
NC_John's Avatar
 
Join Date: Jul 2013
Location: Rockwell, NC
Posts: 1,639
Re: 5.3 LM7 - yay or nay?

Quote:
Originally Posted by Cjcolbyjack View Post
Look for a place like lonstaronlineauctions. That have auctions for your local impound. Public auction. I just picked up a 2000 escalade 6.0 awd for $700 total price. 170k. It was rolled. The guys that look at those auctions are looking for cars to fix. Not the ones completely trashed. I also just picked up a 05 awd Lincoln aviator with 100k for 1100. I'm gonna set my 54 right on top and be done.
I wasn't able to find anything like that over here in the tarheel. Everything ended up linking back to copart (who seems to have a monopoly on all the salvage stuff around here).

I found a bunch of viable engines just out of state on CL and am going back and forth getting pictures and info from the sellers.
__________________
1970 C-10 LWB "Blu"

Instagram (current build pictures) 70_nc_c10
NC_John is offline   Reply With Quote
Old 09-20-2016, 11:47 AM   #21
NC_John
Registered User
 
NC_John's Avatar
 
Join Date: Jul 2013
Location: Rockwell, NC
Posts: 1,639
Re: 5.3 LM7 - yay or nay?

Quote:
Originally Posted by Cjcolbyjack View Post
This should answer all your questions
http://www.stevesnovasite.com/forums...d.php?t=115983
thanks for the link. I'll read up during lunch.
__________________
1970 C-10 LWB "Blu"

Instagram (current build pictures) 70_nc_c10
NC_John is offline   Reply With Quote
Old 09-20-2016, 02:17 PM   #22
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,670
Re: 5.3 LM7 - yay or nay?

John..you might give this guy (chris) a holler..he does ls swaps for a business and he always has ls engines for sale..he's in Cleveland tn. Http://www.lightninrods.com/ ...his craigslist ad is..http://chattanooga.craigslist.org/pts/5768714513.html
mongocanfly is offline   Reply With Quote
Old 09-21-2016, 07:47 AM   #23
NC_John
Registered User
 
NC_John's Avatar
 
Join Date: Jul 2013
Location: Rockwell, NC
Posts: 1,639
Re: 5.3 LM7 - yay or nay?

Quote:
Originally Posted by mongocanfly View Post
John..you might give this guy (chris) a holler..he does ls swaps for a business and he always has ls engines for sale..he's in Cleveland tn. Http://www.lightninrods.com/ ...his craigslist ad is..http://chattanooga.craigslist.org/pts/5768714513.html
Thanks. I saw his ad on CL when I was searching. He's about 5.5-6 hrs from me so a little further than I want to go.
__________________
1970 C-10 LWB "Blu"

Instagram (current build pictures) 70_nc_c10
NC_John is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:08 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com