AZ HO52 no spin center section - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**t korinek** · 07-05-2010, 11:33 PM

HO 52 No spin locker option out of a 72 Cheyenne, gear ratio is 4.10 $350 for the complete center section, or entire rear end.

Shipping available on the center section.

Thanks,
Tom

**w314speed** · 07-06-2010, 07:09 AM

I'm interested in the aux batt/camper wiring RELAY mounted under the aux batt tray on the core support and the aux fuel valve w/handle and brush shield if in good shape shipped to 30127, pics and prices? Thanks, Dan

Duncan and son · 07-06-2010, 09:05 AM

Hey Tom, I noticed the truck is a med bronze. Are you parting out the truck or just selling the rear end? If you are parting out, do you have any good doors fenders tailgate etc, we are always looking for good original paint sheet metal. Feel free to call 806-252-4174.
Always appreciate you Paul

b&a72 · 07-06-2010, 03:27 PM

I am interested in the whole rearend depending on the gear ratio.

Jason M · 07-06-2010, 10:27 PM

If its a 5.14 diff then I will take it, as long as I'm not stepping on any toe's or jumping the line. I have a 4.10 carrier I could trade if you need better street gears.
I need the lower 5.14 gears for a offroader I'm building.
Jason.

**t korinek** · 07-07-2010, 12:59 AM

I am going to guess the gears are either 4.10 or 4.57

w314speed I'll check on that aux battery wiring & etc,

Duncan and son, I am parting the truck, the cab & doors are already sold & the fenders are not straight.
I do have a 72 in a dark green that has a pair of nice fenders & hood in original paint

b&a72 You have 1st shot at the rear diff, know that it will be at least a 4.10 ratio.

Jason M, I'll let you know if the gears are 5.13

Thanks,
Tom

Jason M · 07-07-2010, 08:16 AM

Thanks and really I dont need the No-spin more the 5.14's gears are what I'm after, so If some one needs the Locker and you are willing to split them up them drop me a PM.

Jason.

b&a72 · 07-07-2010, 11:23 AM

Thanks Tom! I am looking for 3:73 so I will pass it on thanks for getting back to me.

**w314speed** · 07-08-2010, 05:22 AM

Hi Tom,
I know you got alot going on! Checking to see if you found out anything on the aux/battery-fuel stuff. Thanks, Dan

**t korinek** · 07-08-2010, 12:03 PM

w314speed, the aux battery tray was gone, I think it was hit in that corner, heres is what there is of the wiring.
Tom

JimmyFloyd · 07-08-2010, 03:54 PM

THe No Spink will be 4:10, 4:56 or 5:13 only, and most likely if it isn't listed on the SPID, it got the 4:56. You can pull the rear cover off and look at the numbers on it. I believe that if the ring has 7 36, that it's 5:13.

Here is a picture of the one I sold recently. You can see the GM 7 36 mark in the center group:

Jason M · 07-08-2010, 04:20 PM

Yep 5.14's is 7-36, 4.56's are 7-32 and 4.10's are stamped 41-10. The 4.10's dont use the 7XX code.
And the HO72's have the numbers stamped on the teeth side of the gear since the load bolt will rub them away and the HO52's have them flat surrface on the oppeset side of the ring.
Jason.

**t korinek** · 07-19-2010, 01:07 AM

Heres some pics, ratio is 4.10 & everything looks to be in great shape, shipping will be at least $75.to a business address.
Thanks,
Tom

WPS · 07-19-2010, 07:43 PM

I am interested. How is the slack in the pinion shaft? Would you sell just the gear set? I don't need the whole axle housing. I am wanting to swap out my 5:14 for the 4:10 so I can get better road speed out of my old 51 Model GMC. That is an HO52 and should bolt right into my axle.
Wayne Switzer 281 421 1360

72freak · 07-19-2010, 08:27 PM

Quote:

Originally Posted by Jason M

If its a 5.14 diff then I will take it, as long as I'm not stepping on any toe's or jumping the line. I have a 4.10 carrier I could trade if you need better street gears.
I need the lower 5.14 gears for a offroader I'm building.
Jason.

I have an HO72 513/514 for sale.

http://67-72chevytrucks.com/vboard/s...d.php?t=386712

Jason M · 07-19-2010, 08:31 PM

Quote:

Originally Posted by 72freak

I have an HO72 513/514 for sale.

Got your PM.

Jason.

**t korinek** · 07-19-2010, 11:19 PM

WPS, selling the center section as a complete unit for $350, I'm not selling the gears seperate. It all seems to be in good shape, this was in a 120,000 mile 2 owner truck, that wasn't beat to death. It had good fluid & no evidence of water or condensation under the cover.
Thanks,
Tom

1959250 · 02-14-2011, 02:11 PM

I'm new to the site and have a 1959 GMC 250 series cab chassis and i'm looking to swap the 5.14 (open) gears for 4.10 gears has an HO 72 (pretty sure dual wheel axle in it). I'm in the military the truck is not with me yet needs full resto. Looking everywhere for front fenders. Brothers has most parts. Any suggestions? Thanks Active duty military member (Heavy equip operator)

WPS · 02-14-2011, 05:08 PM

I can't help you there? I am working on a 51 model AD GMC and all the parts do differ from a 59. Another good resouce is OldGMCTrucks.com. They have some used parts from time to time. Also there is a section there that lists craiglist items for GMC from all over the country. I did get the 4:10 parts and have not put them in the truck yet. In fact I am tacking it down to the shop this afternoon. I was going to put it in myself, but have been down in the back for almost 6 months. I'm feeling a lot better, but don't want to screw it up again. So I am going to pay to have it done. It's a little too heavy for me to be tugging around at my age anyway.
Good luck with your search and thanks for serving our country. I did my time in the CB's during Nam. Everything after that has been a bonus.

Theboatandcarman · 10-01-2016, 09:36 PM

you have 2 things i need on this parts truck. please let me know if you still have this!!!

07-05-2010, 11:33 PM	#1
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	HO52 4.10 no spin center section HO 52 No spin locker option out of a 72 Cheyenne, gear ratio is 4.10 $350 for the complete center section, or entire rear end. Shipping available on the center section. Thanks, Tom Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ! Last edited by t korinek; 07-20-2010 at 01:50 AM. Reason: new info

07-06-2010, 07:09 AM	#2
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,317	Re: HO52 no spin center section I'm interested in the aux batt/camper wiring RELAY mounted under the aux batt tray on the core support and the aux fuel valve w/handle and brush shield if in good shape shipped to 30127, pics and prices? Thanks, Dan

07-06-2010, 09:05 AM	#3
Duncan and son Registered User Join Date: Sep 2009 Location: Lubbock Texas Posts: 1,049	Re: HO52 no spin center section Hey Tom, I noticed the truck is a med bronze. Are you parting out the truck or just selling the rear end? If you are parting out, do you have any good doors fenders tailgate etc, we are always looking for good original paint sheet metal. Feel free to call 806-252-4174. Always appreciate you Paul __________________ You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually

07-06-2010, 03:27 PM	#4
b&a72 Active Member Join Date: Oct 2006 Location: Mesa, AZ Posts: 682	Re: HO52 no spin center section I am interested in the whole rearend depending on the gear ratio.

07-06-2010, 10:27 PM	#5
Jason M Registered User Join Date: Apr 2010 Location: Holland Mass Posts: 21	Re: HO52 no spin center section If its a 5.14 diff then I will take it, as long as I'm not stepping on any toe's or jumping the line. I have a 4.10 carrier I could trade if you need better street gears. I need the lower 5.14 gears for a offroader I'm building. Jason. __________________ PM me if you have any HO52 or HO72 5.14 gears for sale or I could trade you a set of 4.10.

07-07-2010, 12:59 AM	#6
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: HO52 no spin center section I am going to guess the gears are either 4.10 or 4.57 w314speed I'll check on that aux battery wiring & etc, Duncan and son, I am parting the truck, the cab & doors are already sold & the fenders are not straight. I do have a 72 in a dark green that has a pair of nice fenders & hood in original paint b&a72 You have 1st shot at the rear diff, know that it will be at least a 4.10 ratio. Jason M, I'll let you know if the gears are 5.13 Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-07-2010, 08:16 AM	#7
Jason M Registered User Join Date: Apr 2010 Location: Holland Mass Posts: 21	Re: HO52 no spin center section Thanks and really I dont need the No-spin more the 5.14's gears are what I'm after, so If some one needs the Locker and you are willing to split them up them drop me a PM. Jason. __________________ PM me if you have any HO52 or HO72 5.14 gears for sale or I could trade you a set of 4.10.

07-07-2010, 11:23 AM	#8
b&a72 Active Member Join Date: Oct 2006 Location: Mesa, AZ Posts: 682	Re: HO52 no spin center section Thanks Tom! I am looking for 3:73 so I will pass it on thanks for getting back to me.

07-08-2010, 05:22 AM	#9
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,317	Re: HO52 no spin center section Hi Tom, I know you got alot going on! Checking to see if you found out anything on the aux/battery-fuel stuff. Thanks, Dan

07-08-2010, 12:03 PM	#10
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: HO52 no spin center section w314speed, the aux battery tray was gone, I think it was hit in that corner, heres is what there is of the wiring. Tom Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-08-2010, 03:54 PM	#11
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: HO52 no spin center section THe No Spink will be 4:10, 4:56 or 5:13 only, and most likely if it isn't listed on the SPID, it got the 4:56. You can pull the rear cover off and look at the numbers on it. I believe that if the ring has 7 36, that it's 5:13. Here is a picture of the one I sold recently. You can see the GM 7 36 mark in the center group: __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3 Last edited by JimmyFloyd; 07-08-2010 at 03:54 PM.

07-08-2010, 04:20 PM	#12
Jason M Registered User Join Date: Apr 2010 Location: Holland Mass Posts: 21	Re: HO52 no spin center section Yep 5.14's is 7-36, 4.56's are 7-32 and 4.10's are stamped 41-10. The 4.10's dont use the 7XX code. And the HO72's have the numbers stamped on the teeth side of the gear since the load bolt will rub them away and the HO52's have them flat surrface on the oppeset side of the ring. Jason. __________________ PM me if you have any HO52 or HO72 5.14 gears for sale or I could trade you a set of 4.10.

07-19-2010, 01:07 AM	#13
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: HO52 no spin center section Heres some pics, ratio is 4.10 & everything looks to be in great shape, shipping will be at least $75.to a business address. Thanks, Tom Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

07-19-2010, 07:43 PM	#14
WPS Registered User Join Date: Jul 2010 Location: Baytown, Texas Posts: 7	Re: HO52 no spin center section I am interested. How is the slack in the pinion shaft? Would you sell just the gear set? I don't need the whole axle housing. I am wanting to swap out my 5:14 for the 4:10 so I can get better road speed out of my old 51 Model GMC. That is an HO52 and should bolt right into my axle. Wayne Switzer 281 421 1360

07-19-2010, 11:19 PM	#17
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: HO52 no spin center section WPS, selling the center section as a complete unit for $350, I'm not selling the gears seperate. It all seems to be in good shape, this was in a 120,000 mile 2 owner truck, that wasn't beat to death. It had good fluid & no evidence of water or condensation under the cover. Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!



Register or Log In To remove these advertisements.

02-14-2011, 02:11 PM	#18
1959250 Registered User Join Date: Feb 2011 Location: Great Falls, MT Posts: 1	Re: HO52 no spin center section I'm new to the site and have a 1959 GMC 250 series cab chassis and i'm looking to swap the 5.14 (open) gears for 4.10 gears has an HO 72 (pretty sure dual wheel axle in it). I'm in the military the truck is not with me yet needs full resto. Looking everywhere for front fenders. Brothers has most parts. Any suggestions? Thanks Active duty military member (Heavy equip operator)

02-14-2011, 05:08 PM	#19
WPS Registered User Join Date: Jul 2010 Location: Baytown, Texas Posts: 7	Re: HO52 no spin center section I can't help you there? I am working on a 51 model AD GMC and all the parts do differ from a 59. Another good resouce is OldGMCTrucks.com. They have some used parts from time to time. Also there is a section there that lists craiglist items for GMC from all over the country. I did get the 4:10 parts and have not put them in the truck yet. In fact I am tacking it down to the shop this afternoon. I was going to put it in myself, but have been down in the back for almost 6 months. I'm feeling a lot better, but don't want to screw it up again. So I am going to pay to have it done. It's a little too heavy for me to be tugging around at my age anyway. Good luck with your search and thanks for serving our country. I did my time in the CB's during Nam. Everything after that has been a bonus.

10-01-2016, 09:36 PM	#20
Theboatandcarman Registered User Join Date: Aug 2015 Location: Harleysville, PA Posts: 398	Re: HO52 no spin center section you have 2 things i need on this parts truck. please let me know if you still have this!!!

Register or Log In To remove these advertisements.