|
10-06-2016, 12:48 AM
|
#1 |
|
Registered User
Join Date: Mar 2013
Location: central coast monterey county california
Posts: 348
|
Headers
I want to get me a set of headers for my 65,its got a 350 sb with a 4 sp manual trans.any suggestions? Thx
|
|
|
|
10-06-2016, 09:10 AM
|
#2 |
|
Moderator
  
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: Headers
My suggestion would be to check out the FAQ section under "Headers": http://67-72chevytrucks.com/vboard/s...d.php?t=646002
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
|
|
|
10-06-2016, 11:39 AM
|
#3 |
|
Registered User
Join Date: Apr 2015
Location: Gallatin, MO
Posts: 295
|
Re: Headers
There's lots of good info in the FAQ link above, but I'll add my 2 cents. Based on several threads here and elsewhere, I put Hooker 2466HKRs on my '66 with a small block and turbo 400. They didn't fit worth a damn. I had to modify everything from shift linkage to dipstick location, to trimming and reinforcing the driver side motor mount perch. Your mileage may vary...
|
|
|
|
|
10-06-2016, 09:41 PM
|
#4 |
|
Registered User
Join Date: Jun 2015
Location: nj
Posts: 32
|
Re: Headers
I have a 65' with a sbc and have a set of block hugger headers similar to these. They fit with no interference with the factory 3 on the tree shifter linkages or clutch z bar. No modifications to anything were needed for them to fit.
|
|
|
|
|
10-06-2016, 10:32 PM
|
#5 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Headers
If you simply get a set of headers made specifically for your truck, you will not have any fitment issues as long as your engine and trans is in the factory location. Hedman #69260's are made to fit '55-'66 trucks with a small block. The Hedman 69090's and Hooker 2452's are made for later model trucks, but can work in the early trucks with some slight clutch linkage mods. Keep in mind that these are all long tube headers. There are mid length headers that will fit the engine and chassis, but I do not know if they will work with a manual trans. One of those would be Hedman 69648.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
