Ramjet vacuum for power brakes... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Smokintire70 · 12-19-2016, 08:38 PM

Hello guys,

I have got a question about the whereabouts of a spot to pull a vacuum for a power brake conversion. It's a performance online kit. Obviously it needs a vacuum, I don't know where a spot to pull a vaccine is. Thanks guys.

Camaroguy · 12-19-2016, 09:10 PM

Quote:

Originally Posted by Smokintire70

Hello guys,

I have got a question about the whereabouts of a spot to pull a vacuum for a power brake conversion. It's a performance online kit. Obviously it needs a vacuum, I don't know where a spot to pull a vaccine is. Thanks guys.

I have a ramjet in a 67 Camaro. I can't remember where I pulled vacuum from for the brakes but I'll check when I get home in a few and upload a pic. Oh, you're going to love that motor.

Camaroguy · 12-19-2016, 09:38 PM

Here you go. Works great.

Smokintire70 · 12-19-2016, 10:10 PM

Thanks a million. I'm starting work on the conversion tomorrow and. I would have looked high and low for that thing. Have a good one!

FRCvette · 12-20-2016, 04:45 AM

I love that ramjet set up. What is all involved in installing on a 350?

James the III · 12-20-2016, 07:50 AM

Quote:

Originally Posted by FRCvette

I love that ramjet set up. What is all involved in installing on a 350?

Most times it's part of a crate engine,

but g.m. did sell the efi set up..

The crate engine is a 1996-2000 vortec truck engine, with that stand alone engine management system.
A different roller cam, 1.6 rockers and 330-340 hp..

The Efi alone was a tad pricey..
Edelbrook makes one, and most likely is about the same .
and isn't cheap..

the g.m. efi requires vortec heads..

FRCvette · 12-20-2016, 09:44 AM

Thanks for the Info James.

davepl · 12-20-2016, 01:29 PM

Yeah, I guess it must be a volume thing, but:

- Cast aluminum Holley carb intake: $99
- Cast aluminum Holley EFI intake: $999

12-19-2016, 08:38 PM	#1
Smokintire70 Registered User Join Date: Jul 2016 Location: Santa Rosa California Posts: 52	Ramjet vacuum for power brakes... Hello guys, I have got a question about the whereabouts of a spot to pull a vacuum for a power brake conversion. It's a performance online kit. Obviously it needs a vacuum, I don't know where a spot to pull a vaccine is. Thanks guys.

12-19-2016, 09:38 PM	#3
Camaroguy Registered User Join Date: Dec 2013 Location: Farmington NM Posts: 655	Re: Ramjet vacuum for power brakes... Here you go. Works great. Attached Images

12-19-2016, 10:10 PM	#4
Smokintire70 Registered User Join Date: Jul 2016 Location: Santa Rosa California Posts: 52	Re: Ramjet vacuum for power brakes... Thanks a million. I'm starting work on the conversion tomorrow and. I would have looked high and low for that thing. Have a good one!

12-20-2016, 04:45 AM	#5
FRCvette Registered User Join Date: Mar 2007 Location: cincy Posts: 694	Re: Ramjet vacuum for power brakes... I love that ramjet set up. What is all involved in installing on a 350? __________________ There's something women like about a pick-up man 1967 c10 swb Stepside 2004 SSR 2013 Silverado swb

12-20-2016, 09:44 AM	#7
FRCvette Registered User Join Date: Mar 2007 Location: cincy Posts: 694	Re: Ramjet vacuum for power brakes... Thanks for the Info James. __________________ There's something women like about a pick-up man 1967 c10 swb Stepside 2004 SSR 2013 Silverado swb

12-20-2016, 01:29 PM	#8
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,334	Re: Ramjet vacuum for power brakes... Yeah, I guess it must be a volume thing, but: - Cast aluminum Holley carb intake: $99 - Cast aluminum Holley EFI intake: $999 __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.