Rubber bumpers under body.

[johnymac]

My 67 C10 was lowered by the previous owner. This was not done properly as I am told anyway.
The rubber bumpers that hit the frame to avoid a total bottom out are missing.

Question is, are these easy to find? I live in New England and there aren't many junk yards with older vehicles around.
Anyone aware of any other years that might fit ?

Thank you.

[john]

GMC Paul should have new bumpers to fit your truck. http://www.webnow.com/GMCPaul

------------------
67 SWB 350eng th400 3:07 posi tilt&tach PS/P/Disc Brakes old air a/c P/W keyless entry gaylord lid 70swb project truck 350/th400



[This message has been edited by john (edited 04-30-2001).]

[cdwhzk]

Go over to the parts board and look for listings by CPNE that's Jeff he lives up in Franconia N.H.he sells alot of good used parts at real good prices. I was just up in Ameherst outside of Nashua this past sunday for the swap meet they have the last sunday of every month that's also a real good place to try there was alot of truck stuff there

------------------


71c10 350/350 air ps pb 320hp crate 2004R tranny from FB performance 410moroso posi completely rustfree body
27T coupe chopper 6.5 inches channeled total height 41inches powered by bigblock Edsel punched out to 490ci topped with 6stromberg97's built back in 67
Whizzer motorbikes 6or7
71C5 Blazer 350/350 needs rust repair but runs new
74Pinto stationwagon daily driver

[Brad]

these should be a dime a dozen or free. try your local yard or I'll send you mine.

------------------
68 Camaro,250(No,I'm not putting in a 350!)
67,LWB,250(Again, I'm not putting in a 350!)
a work in progress
"Praise The Lowered"