|
03-04-2017, 12:19 PM
|
#1 |
|
Registered User
Join Date: Jan 2017
Location: Spring, TX
Posts: 8
|
Console for Speakers
Thinking about other options for speakers besides kick panels. No room behind/under seats and not interested in cutting or drilling. Does anyone have a custom console that house speakers? Need some inspiration!
|
|
|
|
03-04-2017, 02:43 PM
|
#2 |
|
Registered User
Join Date: Mar 2016
Location: Long Island NY
Posts: 598
|
Re: Console for Speakers
No pics but I made a custom center stack (just under the dash no console) for my old 1971 dart. Simple 3 sided deal that fit under the dash to hold a modern radio on the front and a speaker on each side. Covered it with black vinyl from local craft store to match the black vinyl interior.
I might do something similar for the c10 as well, depends on what I decide on for a radio. Would like to stay with a stack instead of a console extending to the seat but maybe integrate cup holders into the bottom of the stack. Maybe some switches at the top of the stack if needed. |
|
|
|
|
03-04-2017, 05:19 PM
|
#3 |
|
Registered User
Join Date: Nov 2016
Location: lowell ma
Posts: 750
|
Re: Console for Speakers
IF this is an automatic truck..
look at what is avail for atv's and side by sides. You will find a ton of options .. |
|
|
|
|
03-04-2017, 11:16 PM
|
#4 |
|
Shortbed club member
Join Date: Jan 2008
Location: Halethorpe, MD
Posts: 439
|
Re: Console for Speakers
__________________
71 custom/10 6.0/4L80E SWB ece 4/6 72 custom camper 350/3 spd 2020 Chevy Express 3500 2023 Hyundai Tuscon 1986 GMC 3500 Bucket Truck Sent from my Rotary Phone via 14.4kb/s modem. |
|
|
|
|
03-04-2017, 11:38 PM
|
#5 |
|
Registered User
Join Date: Apr 2015
Location: East Tn (In the heart of the Smoky Mtns)
Posts: 1,887
|
Re: Console for Speakers
I made a three-sided box, that goes under the dash, that covers the heater box. I mounted a 6 inch round speaker on each side.
I first cut out a cardboard pattern, transferred it to thin plywood, cut it out, assembled it, and then covered it with vinyl that matches my interior. I built it about 20 years ago and made it with enough room for newer audio equipment, but still haven't yet. 
|
|
|
|
|
03-06-2017, 11:33 AM
|
#6 |
|
Registered User
Join Date: Sep 2016
Location: Fredericksburg
Posts: 13
|
Re: Console for Speakers
I made this in about an hour a while back using scrap wood I had laying around the shop. Use black epoxy/appliance paint after a little sanding/rounding/putty. Went to the junkyard and got some drop-in cupholders and storage tray - then wired up accessory power to a wireless charging pad under the tray. Works great, functional and cost less than $20 including the junkyard scraps and wireless charging pad. Has a pair of 6x9 in it one on each side.
|
|
|
|
|
03-06-2017, 12:59 PM
|
#7 |
|
Registered User
Join Date: Jan 2017
Location: Spring, TX
Posts: 8
|
Re: Console for Speakers
Awesome! Thanks y'all, great ideas. Jack_71C10 thanks for the link, might have to go that direction. Will post some pics when I get something installed.
|
|
|
|
 |
| Bookmarks |
| Tags |
| console, speakers, stereo |
|
|
Linear Mode
