Task Force series, engine to hood clearance?

[MoFire]

Originally Posted by dsraven

in order to properly answer your question we would need to know what you have to work with. a stock frame/suspension, an aftermarket IFS, maybe a clip from a donor car? you may need to consider the engine height in relation to those items so you can get an oil pan/oil pump pick up to clear the solid axle suspension travel or the crossmember from a newer system. also the power steering pump/ac pump, alternator will need to clearance everything. we would also need to know what you have for exhaust manifolds or headers in order to clear the steering column shaft, brake master cylinder clearances if firewall mounted. also consider rad to engine space for fan or electric fan clearances, trans shifter location, etc. do the pedals go through the floor, so a stock frame with the master cylinder under the floor? do you have the standard steering system from a stock truck? etc. if a donor clip is it a rear steer (box behind the crossmember) or a front steer system? it makes a difference when trying to find clearance for steering shafts and exhaust systems, starter clearances etc.
a few pics would also help
try to keep the engine as low as possible in the frame so you not only clear the hood but also keep a low centre of gravity.
remember that something that has enough power to go fast also needs enough brake power to stop fast and probably should have a steering system that can turn fast if required.

All solid points! guess I should've stated that I was curious if anybody had a similar build for a quick answer, cause the price is right on the blown 502! Lol
My plans are an LS engine and Tremec trans, likely a IFS and 4 link rear, bagged. Boxed frame, C notched or PB dropmember front/back etc, Just what's floating around for ideas right now, still forming my final plan for the build.
Thanks again for the replies, good knowledge found on this forum for sure!
Posted via Mobile Device