72 C10 wheel offset/tire size - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972chad · 04-20-2017, 10:15 AM

I'm looking to install some 20" us mags/tourque thrust II on my 72 C10 swb. What's everyone running for offset and tire size? Truck has factory wheel tubs and is slightly lowered. Any help would be great new to the forum! Thanks

B Myers · 04-20-2017, 10:26 AM

Can't help you with the wheel choice but nice truck and welcome, I'm down in Murphysboro not too far from you. I do a lot of business with Weir.

weq92f · 04-20-2017, 10:50 AM

There is a nifty little device available for about 100 bucks that measures all of the parameters and allows you to put it on the vehicle to effectively model your choice on the car.

I would call around to the wheel shops in your area to see if anybody has one of these and will allow you to utilize it for your needs.

Basically you attach it to your hub and then place the 'tire contact' patch thingy wherever you want it in your wheel well. When you're happy, take the measurements and then order your wheels.

-klb

Trackman101 · 04-20-2017, 10:58 AM

This worked for me.
Front 20x8 4.5-5.0 BS or 8.5 with 5.0-5.5 BS
Back 20X10 5.5 BS
Get a square and tape measure to double check for your set up.

1972chad · 04-20-2017, 11:02 AM

Thanks for fast feedback! Ill have to look into getting one of those tools will be worth it that's for sure.

04-20-2017, 10:15 AM	#1
1972chad Registered User Join Date: Apr 2017 Location: Red Bud Il Posts: 2	72 C10 wheel offset/tire size I'm looking to install some 20" us mags/tourque thrust II on my 72 C10 swb. What's everyone running for offset and tire size? Truck has factory wheel tubs and is slightly lowered. Any help would be great new to the forum! Thanks Attached Images Last edited by 1972chad; 04-20-2017 at 10:18 AM. Reason: Picture

04-20-2017, 10:26 AM	#2
B Myers Registered User Join Date: Feb 2016 Location: Murphysboro Illinois Posts: 120	Re: 72 C10 wheel offset/tire size Can't help you with the wheel choice but nice truck and welcome, I'm down in Murphysboro not too far from you. I do a lot of business with Weir.

04-20-2017, 10:50 AM	#3
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 3,267	Re: 72 C10 wheel offset/tire size There is a nifty little device available for about 100 bucks that measures all of the parameters and allows you to put it on the vehicle to effectively model your choice on the car. I would call around to the wheel shops in your area to see if anybody has one of these and will allow you to utilize it for your needs. Basically you attach it to your hub and then place the 'tire contact' patch thingy wherever you want it in your wheel well. When you're happy, take the measurements and then order your wheels. -klb Attached Images __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold

04-20-2017, 10:58 AM	#4
Trackman101 Registered User Join Date: Jul 2015 Location: Alberta Posts: 161	Re: 72 C10 wheel offset/tire size This worked for me. Front 20x8 4.5-5.0 BS or 8.5 with 5.0-5.5 BS Back 20X10 5.5 BS Get a square and tape measure to double check for your set up.

04-20-2017, 11:02 AM	#5
1972chad Registered User Join Date: Apr 2017 Location: Red Bud Il Posts: 2	Re: 72 C10 wheel offset/tire size Thanks for fast feedback! Ill have to look into getting one of those tools will be worth it that's for sure.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.