WA 72 A/C cab for cuts - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 12-07-2016, 04:54 PM

Quote:

Originally Posted by My72BB

Randy,

I'm going to step out of line on the a/c dash...I've got to do a little more homework. Good talking to you.

Alan

Nice talking to you too Allen, let me know if you change your mind

*randy500* · 12-15-2016, 02:17 PM

Ttt

6772king · 12-17-2016, 08:20 PM

I need the right pillar if it's still available...Shipping would be to 16127

*randy500* · 12-17-2016, 09:18 PM

Quote:

Originally Posted by 6772king

I need the right pillar if it's still available...Shipping would be to 16127

Do you need the A pillar or the B pillar and upper, lower and how much of it. A picture would be helpful. Whatever you need I would say it's $35 for the cut and estimate for now shipping to be $25 to $35, size generally increases the price and its not that heavy for the cubic size.

jcnelson · 12-18-2016, 07:12 PM

I need the gas filler section from door jam back around corner 8 inches up and down would be awesome

*randy500* · 12-18-2016, 09:04 PM

Quote:

Originally Posted by jcnelson

I need the gas filler section from door jam back around corner 8 inches up and down would be awesome

No problem, just the outer skin and not the jamb right? $35 for the cut and that should fit in a medium flat rate box with dimentions of 11-7/8" x 3-3/8" x 13-5/8" for about $14? If that works for you then send me your phone number and I will draw out what I plan to cut and send you a picture then you can pay via paypal.

jcnelson · 12-18-2016, 09:08 PM

Thanks but I found one already.

*randy500* · 12-18-2016, 09:12 PM

Quote:

Originally Posted by jcnelson

Thanks but I found one already.

You found that FAST

jcnelson · 12-18-2016, 09:14 PM

Well I'm in Florida and found one in Georgia.

6772king · 12-18-2016, 09:23 PM

Here is a pic. Half way down the a pillar and about 6inchs past the seam going across the windshield would. Be good. Thanks

*randy500* · 12-18-2016, 09:38 PM

Quote:

Originally Posted by 6772king

Here is a pic. Half way down the a pillar and about 6inchs past the seam going across the windshield would. Be good. Thanks

I have a solid A pillar for the passenger side, price as quoted and actual shipping. Just tell me a measurement in inches down and over from the corner. Is it ok cut under the rain gutter or do you need the gutter in that area too?

6772king · 12-23-2016, 06:02 PM

Hey Randy,,,I wold like the gutter is possible...If u go down 4 and over 16 from inside upper corner of windshield and back 2-3 inches on the upper door opening that would be great...I also would like the burb parts also ...No big hurry ....Thanks Sean

skinnan · 05-25-2017, 05:22 PM

do you have either of the A pillars still available. Need upper pieces prolly 4" across and 6" down if you have them. Shipping to 32763. Thanks

**Dave** · 05-26-2017, 07:58 AM

Randy, if you still have the cab I need the floor section that has the weld nuts for the high hump. So basically 1" from center all the way around the hole openings for the high hump. Lmk and thank you.

**Chevy Fan Always** · 05-26-2017, 08:29 AM

Do you happen to have a white 72 a/c dash? If not, any color would do. Price shipped to 44805. we have a Fastenal near us or can have it shipped to a business.

Thanks

skinnan · 05-26-2017, 03:12 PM

do you have either of the A pillars still available. Need upper pieces prolly 4" across and 6" down if you have them. Shipping to 32763. Thanks

12-15-2016, 02:17 PM	#52
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 72 A/C cab for cuts Ttt

12-17-2016, 08:20 PM	#53
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	Re: 72 A/C cab for cuts I need the right pillar if it's still available...Shipping would be to 16127 __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

12-18-2016, 07:12 PM	#55
jcnelson Registered User Join Date: Nov 2014 Location: jacksonville florida Posts: 128	Re: 72 A/C cab for cuts I need the gas filler section from door jam back around corner 8 inches up and down would be awesome

12-18-2016, 09:08 PM	#57
jcnelson Registered User Join Date: Nov 2014 Location: jacksonville florida Posts: 128	Re: 72 A/C cab for cuts Thanks but I found one already.

12-18-2016, 09:14 PM	#59
jcnelson Registered User Join Date: Nov 2014 Location: jacksonville florida Posts: 128	Re: 72 A/C cab for cuts Well I'm in Florida and found one in Georgia.

12-18-2016, 09:23 PM	#60
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	Re: 72 A/C cab for cuts Here is a pic. Half way down the a pillar and about 6inchs past the seam going across the windshield would. Be good. Thanks Attached Images __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

12-23-2016, 06:02 PM	#62
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	Re: 72 A/C cab for cuts Hey Randy,,,I wold like the gutter is possible...If u go down 4 and over 16 from inside upper corner of windshield and back 2-3 inches on the upper door opening that would be great...I also would like the burb parts also ...No big hurry ....Thanks Sean __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

05-25-2017, 05:22 PM	#63
skinnan Registered User Join Date: Aug 2007 Location: Orange City, Florida Posts: 76	Re: 72 A/C cab for cuts do you have either of the A pillars still available. Need upper pieces prolly 4" across and 6" down if you have them. Shipping to 32763. Thanks

05-26-2017, 07:58 AM	#64
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,404	Re: 72 A/C cab for cuts Randy, if you still have the cab I need the floor section that has the weld nuts for the high hump. So basically 1" from center all the way around the hole openings for the high hump. Lmk and thank you. Last edited by Dave; 05-26-2017 at 12:02 PM.

05-26-2017, 08:29 AM	#65
Chevy Fan Always Registered User Join Date: May 2015 Location: Ashland, Ohio Posts: 579	Re: 72 A/C cab for cuts Do you happen to have a white 72 a/c dash? If not, any color would do. Price shipped to 44805. we have a Fastenal near us or can have it shipped to a business. Thanks

05-26-2017, 03:12 PM	#66
skinnan Registered User Join Date: Aug 2007 Location: Orange City, Florida Posts: 76	Re: 72 A/C cab for cuts do you have either of the A pillars still available. Need upper pieces prolly 4" across and 6" down if you have them. Shipping to 32763. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.