|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-24-2017, 02:36 AM
|
#1 |
|
Registered User
Join Date: Jun 2013
Location: West Virginia
Posts: 6,427
|
How do you clean inside a side marker lens?
I removed the old gaskets from my side marker lenses but there is dirt/road grime inside the lenses up in the edges. I tried soaking in detergent water but no luck.
I have been told by a knowledgeable source these are glued together. How would you guys get that grime out? it looks bad from the outside of the truck. |
|
|
|
09-24-2017, 09:54 AM
|
#2 |
|
Registered User
Join Date: Apr 2015
Location: East Tn (In the heart of the Smoky Mtns)
Posts: 1,893
|
Re: How do you clean inside a side marker lens?
Unless you want original, or even NOS replacements, order a new set from one of the vendors here. For $50 or less you'll have nice clean lenses to accent your nice paint.
For years I struggled with the same conundrum until one day at a truck show I saw new ones on a display. Done. |
|
|
|
|
09-24-2017, 11:40 AM
|
#3 |
|
Registered User
Join Date: Apr 2017
Location: Norfolk,Va.
Posts: 31
|
Re: How do you clean inside a side marker lens?
could you use a bottle brush. If you have a lab supply company around you , or even the internet, you might be able to find one. I have use tapered bottle brushes for cleaning test tubes in a lab, just a thought.
|
|
|
|
|
09-24-2017, 01:09 PM
|
#4 |
|
Registered User
Join Date: Jun 2013
Location: West Virginia
Posts: 6,427
|
Re: How do you clean inside a side marker lens?
Bottle brush might be an idea to try. A junkyard guy priced his at $8.00 a piece, I'll call him and ask if those are new or old. Thanks guys.
|
|
|
|
|
09-24-2017, 01:46 PM
|
#5 |
|
Senior Member
 
Join Date: Feb 2010
Location: Falls City, Nebraska "100 Miles From Nowhere"
Posts: 2,219
|
Re: How do you clean inside a side marker lens?
I used Q-tips and zip ties with pieces of rags glued to the ends. And for the best bang for the buck is "Purple Power" from Dollar General, that stuff cuts anything! Careful around paint with that stuff though because it is a mild acid solution cleaner but great for plastics...
__________________
Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property"  "Be American, Buy American" 
|
|
|
|
|
09-24-2017, 02:23 PM
|
#6 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: How do you clean inside a side marker lens?
Small screw driver with rag on the end with some kind of cleaner soaked. Tooth brush may work also.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
09-24-2017, 05:18 PM
|
#7 |
|
Registered User
Join Date: Sep 2017
Location: Shacklefords, VA
Posts: 21
|
Re: How do you clean inside a side marker lens?
Get some long pipe cleaners from the craft section, fold them in half and twist a few together, works like a charm.
|
|
|
|
|
09-24-2017, 05:21 PM
|
#8 | |
|
Registered User
Join Date: Jun 2013
Location: West Virginia
Posts: 6,427
|
Re: How do you clean inside a side marker lens?
Quote:
|
|
|
|
|
|
09-24-2017, 05:33 PM
|
#9 |
|
Registered User
Join Date: Apr 2017
Location: Norfolk,Va.
Posts: 31
|
Re: How do you clean inside a side marker lens?
pipe cleaners- sounds like a good idea
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
