Brake pedal won't come up. please help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

feg05 · 05-17-2002, 02:55 AM

I changed my 75' 1/2ton from power to manual brakes. I bought a new master cyl. with the correct push rod. After bleeding the cyl. and the lines, the brake pedal doesn't return all the way to the top. It lacks about an inch. Do I need a return spring? I hope you guys can help. Thanks

*Fast68Chevy* · 05-28-2002, 03:17 PM

true manual pedal rods have length adjustment, sound slike it needs to be adjusted a bit longer, does the pedal come back up all the way if you puill it, or is the bumpoer stop under dash preventing it from doing so ?

you need ot give more info and think about this, what would cause this, youll figure it out if you think on it

05-17-2002, 02:55 AM	#1
feg05 Registered User Join Date: May 2002 Location: Alexandria, in Posts: 10	Brake pedal won't come up. please help I changed my 75' 1/2ton from power to manual brakes. I bought a new master cyl. with the correct push rod. After bleeding the cyl. and the lines, the brake pedal doesn't return all the way to the top. It lacks about an inch. Do I need a return spring? I hope you guys can help. Thanks __________________ 75' 1/2 ton shortbed 468 bbc 541hp. on dyno,th400 with Coan 3500 stall,12bolt with 3.73 posi.

05-28-2002, 03:17 PM	#2
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	true manual pedal rods have length adjustment, sound slike it needs to be adjusted a bit longer, does the pedal come back up all the way if you puill it, or is the bumpoer stop under dash preventing it from doing so ? you need ot give more info and think about this, what would cause this, youll figure it out if you think on it



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.