S10 cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

49chevy3100 · 11-11-2017, 01:37 PM

Anyone in California sonoma county or in Santa Rosa that knows of a place where they would take the s10 cab guy who picked up the AD frame and all s10 parts left the cab which he was suppose to take now I'm stuck with a cab I called creams the dump n junk yards with no luck

**mr48chev** · 11-11-2017, 02:51 PM

Sawzall, torch or I have cut a number of cars up with an axe when I couldn't afford gas for the torch and didn't have the sawzall yet. Cut it into sections and mix it in with other scrap in a couple of loads. If you need patch panels cut the out of it.

I'd throw it on craigslist with a load it up get it out of here and you can have it post first though. Do the It's free if you take it all but individual parts will cost thing.

_Ogre · 11-11-2017, 07:09 PM

craigslist free section

**mr48chev** · 11-11-2017, 08:32 PM

The local scrap yard doesn't require a title if you only haul in a section or a couple of sections of a body in. Pain in the but but if someone doesn't take it for free I'd just cut it in sections and haul the roof and doors in one time with some other tin, haul the cowl in another time and the back of the cab in another time. Not all the same day though.

abig84 · 11-14-2017, 02:36 PM

around here you have to cut it up into small pieces. if any of it even looks like a cab or firewall they will throw a fit, i cut up a 1991 silverado earlier this year for parts and it had no title. the bed, doors, fenders, etc you have no problem scrapping.

if you have scrappers in your area maybe just cut everything up into 1 foot sections and put out a 1/4 of it every week for them to take

**gigamanx** · 11-14-2017, 02:43 PM

That's a bummer, I know the scrapper took my cab but they took the title with it. They didn't ask for a title for any of the other sheet metal...just when the cab showed up.

49chevy3100 · 11-14-2017, 03:10 PM

yea bummer..... will have to cut it up then since ive had no luck with finding someone to take it. ill end up using some of the sheet metal now and save some money there.

MARTINSR · 11-14-2017, 03:19 PM

Call a couple of big body shops and tell them your problem to see if they have someone who picks up sheetmetal like we do. The guy would go by your house and get it. Or you could cut it up and put it in the metal bin at the body shop.

Brian

tmoble · 11-15-2017, 06:39 PM

>>> Sawzall, torch or I have cut a number of cars up with an axe when I couldn't afford gas for the torch

an axe! excellent. hot rodders are endlessly inventive.

11-11-2017, 01:37 PM	#1
49chevy3100 Registered User Join Date: Aug 2014 Location: santa rosa,CA Posts: 95	S10 cab Anyone in California sonoma county or in Santa Rosa that knows of a place where they would take the s10 cab guy who picked up the AD frame and all s10 parts left the cab which he was suppose to take now I'm stuck with a cab I called creams the dump n junk yards with no luck __________________ ERIC'S 49/S10 FRAME SWAP MY YOUTUBE CHANNEL

11-11-2017, 02:51 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: S10 cab Sawzall, torch or I have cut a number of cars up with an axe when I couldn't afford gas for the torch and didn't have the sawzall yet. Cut it into sections and mix it in with other scrap in a couple of loads. If you need patch panels cut the out of it. I'd throw it on craigslist with a load it up get it out of here and you can have it post first though. Do the It's free if you take it all but individual parts will cost thing. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

11-11-2017, 07:09 PM	#3
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: S10 cab craigslist free section __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

11-11-2017, 08:32 PM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: S10 cab The local scrap yard doesn't require a title if you only haul in a section or a couple of sections of a body in. Pain in the but but if someone doesn't take it for free I'd just cut it in sections and haul the roof and doors in one time with some other tin, haul the cowl in another time and the back of the cab in another time. Not all the same day though. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

11-14-2017, 02:36 PM	#5
abig84 Registered User Join Date: Jan 2017 Location: wheaton IL Posts: 659	Re: S10 cab around here you have to cut it up into small pieces. if any of it even looks like a cab or firewall they will throw a fit, i cut up a 1991 silverado earlier this year for parts and it had no title. the bed, doors, fenders, etc you have no problem scrapping. if you have scrappers in your area maybe just cut everything up into 1 foot sections and put out a 1/4 of it every week for them to take

11-14-2017, 02:43 PM	#6
gigamanx Senior Member Join Date: Sep 2016 Location: Hershey, PA Posts: 1,004	Re: S10 cab That's a bummer, I know the scrapper took my cab but they took the title with it. They didn't ask for a title for any of the other sheet metal...just when the cab showed up. __________________ Current Build Thread 1930 Ford Model A Modern Twist: Ford Model A Rat Rod With a Modern Twist Build Thread Phase 1 "The Swap": 1949 3100 with S10 swap. Beginner build with ambition! Build Thread Phase 2 "The Drop": Beginner Build with Ambition gets Air Ride

11-14-2017, 03:10 PM	#7
49chevy3100 Registered User Join Date: Aug 2014 Location: santa rosa,CA Posts: 95	Re: S10 cab yea bummer..... will have to cut it up then since ive had no luck with finding someone to take it. ill end up using some of the sheet metal now and save some money there. __________________ ERIC'S 49/S10 FRAME SWAP MY YOUTUBE CHANNEL

11-14-2017, 03:19 PM	#8
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: S10 cab Call a couple of big body shops and tell them your problem to see if they have someone who picks up sheetmetal like we do. The guy would go by your house and get it. Or you could cut it up and put it in the metal bin at the body shop. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

11-15-2017, 06:39 PM	#9
tmoble Registered User Join Date: Feb 2009 Location: Glendale, Az Posts: 1,062	Re: S10 cab >>> Sawzall, torch or I have cut a number of cars up with an axe when I couldn't afford gas for the torch an axe! excellent. hot rodders are endlessly inventive.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.