11-22-2017, 08:26 PM | #1 |
Registered User
Join Date: May 2016
Location: Brookings, SD
Posts: 29
|
72 K5 Top Re-assembly
Hey there folks. We have finally got freezing weather here in Nebraska. And driving the rig back and fourth to high school has gotten too cold for me...so it's time to get the top on. The only problem is the guy I bought it from had the top completely torn apart to have the fiberglass fixed. So my fiberglass is in great shape, but I need to get everything put back together. ANY advice or diagrams you folks can offer would be much appreciated. Thank you.
P.S. Any other members on here from the Lincoln, Nebraska area? |
11-26-2017, 04:08 AM | #2 |
Registered User
Join Date: Jan 2014
Location: Dublin, CA
Posts: 27
|
Re: 72 K5 Top Re-assembly
I have a 70 with a Hard top that was partially restored. It came with new front windshield gaskets and new gaskets around the side and hatch glass. But the rear hatch is missing the lock, handle and operating mechanism, and there are no latches insiide to lock it. Im looking for a build thread or video to show how to install the weatherstripping and rebuild the hatch.
Good luck with your rebuilt too! Paul |
11-26-2017, 10:00 AM | #3 |
Registered User
Join Date: Jul 2005
Location: Colorado Springs, CO.
Posts: 32
|
Re: 72 K5 Top Re-assembly
Does the fiberglass itself need to be rebuilt or are you just needing guidance on getting the latch parts and assembly Guidance? I just did this myself. I didn’t do a video but could probably help. Others may have a video...
There are old threads that describe it pretty too if you search. I have some misc parts but not the internal rods themselves. |
11-26-2017, 02:46 PM | #4 |
Registered User
Join Date: Jan 2014
Location: Dublin, CA
Posts: 27
|
Re: 72 K5 Top Re-assembly
The fiberglass on the external top and sides and the hatch are all in good shape.
Several of the lower inside mounting holes have 1+” cracked holes in half of them. So the prior owner fabricated a few 1.5” x 6-12” home made fasteners. I have new side window weatherstrip, and ordered hatch to body, rear hatch and hatch to tailgate weatherstripping. I also ordered a handle because mind just had a big hole there. When I looked in the hole, I see the metal flange and 1 of the rods, but the other rod is missing and there is no mechanism for the handle square rod to connect. Yesterday we pulled the top off, with the intent to install the side moldings, but I could not find a video or instruction on how they fasten to the top. I see half a dozen screw holes but was told by the prior owner we just needed weatherstrip adhesive, which I have. It’s going to rain today so we put the top back on. When we got it back on, the rear latch would no longer open. The original steel hatch support on the left side will not open more than a few inches. We could not figure out how to release it to get it t go up again. If it’s possible to convert it to gas lift supports, we would prefer to do that, too. I’m also going to need to sort out the wiring that connects to the interior lights in there too. But the lights and wiring in he can are all there. Any help is greatly appreciated. Paul |
11-26-2017, 03:23 PM | #5 |
Registered User
Join Date: May 2016
Location: Brookings, SD
Posts: 29
|
Re: 72 K5 Top Re-assembly
I'm about to do the gas shock conversion. It appears to be vervy simple, but we will see.
|
11-26-2017, 04:21 PM | #6 |
Registered User
Join Date: Jan 2014
Location: Dublin, CA
Posts: 27
|
Re: 72 K5 Top Re-assembly
Is there a kit you are using or which air lift shocks and mounts are you using? That hatch seems pretty heavy to me.
|
11-26-2017, 09:37 PM | #7 |
Registered User
Join Date: May 2016
Location: Brookings, SD
Posts: 29
|
Re: 72 K5 Top Re-assembly
I bought 2 sets of gas pedel studs from GMCPaul's truck parts. They're suposed to be the same size thread as what is used for the attachments bolts for our hatch. And then you can connect your struts to them. Still waiting for them to come in the mail, but will let ya'll know as soon as possible.
|
11-26-2017, 09:42 PM | #8 |
Registered User
Join Date: May 2016
Location: Brookings, SD
Posts: 29
|
Re: 72 K5 Top Re-assembly
Also, what does the piece look like that the hatch actually locks into? (The one that bolts into the main body of the top)
|
11-26-2017, 10:08 PM | #9 | |
Senior Member
Join Date: Mar 2016
Location: Near Canon City ,Colorado
Posts: 4,062
|
Re: 72 K5 Top Re-assembly
Quote:
__________________
'35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 MIKE
Last edited by 3757chevy; 11-29-2017 at 02:06 PM. Reason: added part number |
|
11-26-2017, 10:29 PM | #10 |
Registered User
Join Date: May 2016
Location: Brookings, SD
Posts: 29
|
Re: 72 K5 Top Re-assembly
Awesome, and another question... Do you guys have any problems with the rods slipping out of the center mechanism?
Last edited by thatcherkozal; 11-27-2017 at 06:40 PM. |
11-28-2017, 03:56 PM | #11 |
Equal opportunity joke ofender
Join Date: Oct 2011
Location: Eastern Shore of MD
Posts: 10,127
|
Re: 72 K5 Top Re-assembly
Here is a decent thread with pics for the hatch
http://67-72chevytrucks.com/vboard/s...d.php?t=209080
__________________
Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type. |
11-29-2017, 10:26 PM | #12 |
Registered User
Join Date: May 2016
Location: Brookings, SD
Posts: 29
|
Re: 72 K5 Top Re-assembly
|
11-30-2017, 01:52 AM | #13 |
Senior Member
Join Date: Mar 2016
Location: Near Canon City ,Colorado
Posts: 4,062
|
Re: 72 K5 Top Re-assembly
I will try to get some pictures. Had some on my old computer lost alot.
__________________
'35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 MIKE
|
12-01-2017, 04:23 AM | #14 |
Senior Member
Join Date: May 2015
Location: Sierra Vista, Arizona
Posts: 398
|
Re: 72 K5 Top Re-assembly
|
12-01-2017, 12:36 PM | #15 |
Senior Member
Join Date: Mar 2016
Location: Near Canon City ,Colorado
Posts: 4,062
|
Re: 72 K5 Top Re-assembly
Sorry no picture , but I put the studs in the upper holes on the gate and the lower on the cap.
__________________
'35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 MIKE
|
Bookmarks |
Tags |
blazer, hatch, top |
|
|