The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-08-2002, 05:25 PM   #1
raychevy
Registered User
 
Join Date: Jul 2000
Location: Evansville, Indiana USA
Posts: 485
Post Repainting Interior

The interior plastic pieces in my 77 have the normal fading for its age. I would like to remove the pieces and paint them with the proper paint. Has anyone caused more problems by trying to remove all those pieces including dash for repaint ? I guess its more like the door panels, dash plastic, headliner trim and the floor board plastic. Any suggestions ?
raychevy is offline   Reply With Quote
Old 05-09-2002, 12:25 AM   #2
Hooter
My other Love
 
Hooter's Avatar
 
Join Date: Aug 2001
Location: Castlegar B.C. Canada
Posts: 4,085
Post

be careful with the headliner because 9 times out of ten those hings like to come glued apart then you need a new headliner. Make sure you use interior dye rather then just piant because paint doesnt stick to the interior parts

------------------
  • 69 custom camper/cst 10
  • 70 monte carlo
  • 73 chevelle 4 door
    deluxe"kermit": no carpet(rubber floor) no floor, no trunk still drives
  • 74 cheyenne super 20 454
  • 77 fully loaded silverado
    that my Grandpa gave me
  • 1980 BMW 320i(at least it isnt Japanese)
  • 1984 Buick skyyhwak that i won
  • 1972 Honda ct 90 trailbike
Castlegar B.C.The great white North (Canada Aye!)
Hooter_5@hotmail.com AC/DC RULES!!!
www.castlegar.com


__________________




Castlegar B.C.The great white North (Canada Eh!)
Hooter_5@hotmail.com
First generation Monte Carlo club
pictures of my life
Hooter is offline   Reply With Quote
Old 05-09-2002, 10:44 AM   #3
backyardbuilt
Registered User
 
Join Date: May 2002
Location: Olathe, Kansas
Posts: 5
Post

Use the dye, I used the interior paint followed the directions to a t, and it still came off. Took it back and got my money back but now I have to redo it all.

------------------
79 chevy blazer frame with 79 cab cut down 77 stepside bed 38.5 boggers.
__________________
79 chevy blazer frame with 79 cab cut down 77 stepside bed 38.5 boggers.
backyardbuilt is offline   Reply With Quote
Old 05-09-2002, 08:12 PM   #4
raychevy
Registered User
 
Join Date: Jul 2000
Location: Evansville, Indiana USA
Posts: 485
Post

Thanks for the info. That should save me lots of time.
raychevy is offline   Reply With Quote
Old 05-10-2002, 07:40 AM   #5
gchemist
BAD BOW-Silverado XST
 
gchemist's Avatar
 
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
Talking

raychevy,

I recommend the dye too on some pieces. I used vinyl primer and paint on my pieces. I have few pictures but on my web page. So far the trims pieces and the dash are holding up really good. It's the door panels and kickpanels that are pealing. The are pealing because of constant contact.

To clean the pieces, I used a solvent based degrease. Don't use a harsh degreaser or you'll melt the pieces. After the degreaser, I used some dish washing soap to clear off any remaining dirt or buildup. Sun dried the pieces and then primered them with a good coat. Let them dry for 24 hours then paint.
Here is picture of my new dash

Door panel looks really nice

Redone headliner ($39.95!!) and trim pieces


------------------
Gerardo
1983 Custom Truck
TX Plates: "BAD BOW"
__________________
Gerardo a.k.a. Mad Chemist
Silverado XST videos
gchemist is offline   Reply With Quote
Old 05-10-2002, 04:48 PM   #6
raychevy
Registered User
 
Join Date: Jul 2000
Location: Evansville, Indiana USA
Posts: 485
Post

I wish mine looked that good!
raychevy is offline   Reply With Quote
Old 05-29-2002, 01:13 PM   #7
kevins67gmc
Registered User
 
kevins67gmc's Avatar
 
Join Date: Jan 2001
Location: Poulsbo, W.A.
Posts: 44
most inportant thang is to make sure panels are clean use a vinl cleaner and fine steel wool i always use gm stuff its more expensive but it has not failed on me wipe down with a clean rag use a plastic etching primmer to fill in any scratches always spray a light coat and let dry completely before applying next coat use the good vynil dye sray a good even thin coat let drye for 24 hours then apply a nother coat i always let them sit a couple of days between coats if it is not preped good they will flake real easy hope this helps .
__________________
kevins67gmc
Poulsbo,WA
kevins67gmc is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com