Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-17-2018, 03:34 AM | #1 |
Senior Member
Join Date: Aug 2008
Location: Long Beach, CA
Posts: 1,813
|
Need a Front Suspension Measurement
I'm wondering if i can get a measurement from someone here who has some newer stock height front 3-leaf sprigs on their Blazer. My Blazer has some worn out 2-leaf sprigs that only have a couple inches from the bumpstop and bottom out all of the time. i don't want a lot of lift so my plan was to replace these with some new 3-leaf springs.
if someone has this setup can you get a measurement from the top of the spring pack (in the middle) to the underside of the frame? I would like to get the same measurement in the rear too if you have newish stock height rear sprigs too! Thanks!
__________________
Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble! |
01-17-2018, 10:16 AM | #2 |
Registered User
Join Date: Mar 2015
Location: Ontario Canada
Posts: 1,531
|
Re: Need a Front Suspension Measurement
The front stock height springs are flat with the truck sitting on the ground.
|
Bookmarks |
|
|