WA Parting out 83 C10 LWB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nitrosport_5** · 02-04-2018, 11:17 PM

Bought this truck for the front suspension/engine/trans. Rest is up for grabs. Sheetmetal/interior is pretty much ruined by the prev owner. Not alot left but figured id make sure nobody needs anything before it gets crushed.

**TKCR** · 02-05-2018, 06:03 AM

Still got the ashtray Insert?

If it still has the bench seat, I would be interested in the tracks too.

Shipping to 43311

**nitrosport_5** · 02-05-2018, 01:26 PM

Here are the tracks, they seem to move freely. Are they supposed to have a slight bow to them?

This truck didnt have the ashtray but im sure ive got one in another truck. Ill go look this afternoon and get back to you on that.

**TKCR** · 02-05-2018, 02:59 PM

Quote:

Originally Posted by nitrosport_5

Here are the tracks, they seem to move freely. Are they supposed to have a slight bow to them?

This truck didnt have the ashtray but im sure ive got one in another truck. Ill go look this afternoon and get back to you on that.

The bow is normal. If you have more tracks too, let me know. But I will take these, if the price is right.

gmcdeadhead · 02-06-2018, 04:50 PM

do you still have the brake pedal arm? can you post a pic , thanks

**nitrosport_5** · 02-06-2018, 08:06 PM

Quote:

Originally Posted by TKCR

The bow is normal. If you have more tracks too, let me know. But I will take these, if the price is right.

here is a second set of tracks and an ashtray. Doesnt look like the ashtray has ever been smoked in, should clean up nice. Hows $120 shipped for the 2 sets of tracks and the ashtray?

**nitrosport_5** · 02-06-2018, 08:11 PM

Quote:

Originally Posted by gmcdeadhead

do you still have the brake pedal arm? can you post a pic , thanks

Here is the one from this truck, dont mind the cat he was sleeping in the truck when i went to take the picture haha. no pad and has 2 drywall screws in it that used to hold the autozone special pads. $5 plus ship for this one

I had a really nice one from a low mile truck.... i just gotta find what safe spot i put it in

**TKCR** · 02-06-2018, 08:11 PM

Sounds good. Send me a PM for payment details

**nitrosport_5** · 02-06-2018, 08:41 PM

Quote:

Originally Posted by TKCR

Sounds good. Send me a PM for payment details

Noticed a small crack in the second set of tracks

**TKCR** · 02-06-2018, 08:52 PM

Quote:

Originally Posted by nitrosport_5

Noticed a small crack in the second set of tracks

PM sent

gmcdeadhead · 02-07-2018, 05:05 PM

pm sent

**Phuloi68** · 02-08-2018, 09:17 PM

Sure wish there wasn't such distance. Could have used the cab if not rusted to bad.

02-04-2018, 11:17 PM	#1
nitrosport_5 Registered User Join Date: Jul 2012 Location: St. John, Washington Posts: 618	Parting out 83 C10 LWB Bought this truck for the front suspension/engine/trans. Rest is up for grabs. Sheetmetal/interior is pretty much ruined by the prev owner. Not alot left but figured id make sure nobody needs anything before it gets crushed. Attached Images __________________ "Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project

02-05-2018, 06:03 AM	#2
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,983	Re: Parting out 83 C10 LWB Still got the ashtray Insert? If it still has the bench seat, I would be interested in the tracks too. Shipping to 43311 __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

02-05-2018, 01:26 PM	#3
nitrosport_5 Registered User Join Date: Jul 2012 Location: St. John, Washington Posts: 618	Re: Parting out 83 C10 LWB Here are the tracks, they seem to move freely. Are they supposed to have a slight bow to them? This truck didnt have the ashtray but im sure ive got one in another truck. Ill go look this afternoon and get back to you on that. Attached Images __________________ "Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project

02-06-2018, 04:50 PM	#5
gmcdeadhead Registered User Join Date: Jul 2007 Location: branchburg, new jersey Posts: 568	Re: Parting out 83 C10 LWB do you still have the brake pedal arm? can you post a pic , thanks

02-06-2018, 08:11 PM	#8
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,983	Re: Parting out 83 C10 LWB Sounds good. Send me a PM for payment details __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

02-07-2018, 05:05 PM	#11
gmcdeadhead Registered User Join Date: Jul 2007 Location: branchburg, new jersey Posts: 568	Re: Parting out 83 C10 LWB pm sent

02-08-2018, 09:17 PM	#12
Phuloi68 Senior Member Join Date: Dec 2003 Location: Valparaiso, In Posts: 1,114	Re: Parting out 83 C10 LWB Sure wish there wasn't such distance. Could have used the cab if not rusted to bad. __________________ Phuloi68 Indy survivor Norwood survivor Big Sandy survivor for those who fight for it... F R E E D O M has a price the protected will never know.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.