No Limit X-Member Kit on a TF - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**idbeast** · 01-14-2018, 05:23 PM

No Limit X-Member Kit on a TF.
I'm going to post this here as I couldn't find any pictures or information about it other then the No Limit web site!
The C-channel boxing plates and X-plates look like they would be a much stronger setup. My engine dynoed out with 517hp so it is a little bit more than the factory V-8. So I took and completely stripped the truck again, and started putting in the square tubing from one side of the frame to the other. I thought it would be smart to X everything, only to find out that it was a big mistake and it raised the passenger side rear corner 1/4 inch do to the welding of the last X piece, so I removed the X and everything went back to normal.

**idbeast** · 01-14-2018, 05:31 PM

Next was cleaning and sanding inside of frame rails, then sealing with Rust-Oleum gloss black, then install.

**idbeast** · 01-14-2018, 08:42 PM

Next is installing the X Bracing.

**dec010974** · 01-16-2018, 08:29 AM

Thanks for sharing. This just gave me a great idea.

**idbeast** · 01-16-2018, 08:51 AM

Quote:

Originally Posted by dec010974

Thanks for sharing. This just gave me a great idea.

You're welcome!

Jim

**robnolimit** · 01-17-2018, 02:06 PM

Looks like you did a nice job. You will be shocked at the ride quality improvement when you drive it again.

**idbeast** · 02-19-2018, 08:47 PM

I guess its time for some updating on the install!
Got it all welded up and the reinforcement bars removed.

**idbeast** · 02-19-2018, 08:54 PM

Then filling unneeded holes in the frame, sanding it and some sandblasting in the hard to get to places then paint!!!

**oldman3** · 02-20-2018, 12:17 AM

Looks great...Jim

**idbeast** · 02-21-2018, 08:29 PM

Quote:

Originally Posted by oldman3

Looks great...Jim

Thanks! I'm really happy with it!

01-14-2018, 05:23 PM	#1
idbeast Senior Member Join Date: Oct 2016 Location: Olympia, WA Posts: 523	No Limit X-Member Kit on a TF No Limit X-Member Kit on a TF. I'm going to post this here as I couldn't find any pictures or information about it other then the No Limit web site! The C-channel boxing plates and X-plates look like they would be a much stronger setup. My engine dynoed out with 517hp so it is a little bit more than the factory V-8. So I took and completely stripped the truck again, and started putting in the square tubing from one side of the frame to the other. I thought it would be smart to X everything, only to find out that it was a big mistake and it raised the passenger side rear corner 1/4 inch do to the welding of the last X piece, so I removed the X and everything went back to normal. Attached Images

01-14-2018, 05:31 PM	#2
idbeast Senior Member Join Date: Oct 2016 Location: Olympia, WA Posts: 523	Re: No Limit X-Member Kit on a TF Next was cleaning and sanding inside of frame rails, then sealing with Rust-Oleum gloss black, then install. Attached Images

01-14-2018, 08:42 PM	#3
idbeast Senior Member Join Date: Oct 2016 Location: Olympia, WA Posts: 523	Re: No Limit X-Member Kit on a TF Next is installing the X Bracing. Attached Images

01-16-2018, 08:29 AM	#4
dec010974 Senior Member Join Date: Oct 2012 Location: Miami, Florida Posts: 970	Re: No Limit X-Member Kit on a TF Thanks for sharing. This just gave me a great idea.

01-17-2018, 02:06 PM	#6
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: No Limit X-Member Kit on a TF Looks like you did a nice job. You will be shocked at the ride quality improvement when you drive it again. __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

02-19-2018, 08:47 PM	#7
idbeast Senior Member Join Date: Oct 2016 Location: Olympia, WA Posts: 523	Re: No Limit X-Member Kit on a TF I guess its time for some updating on the install! Got it all welded up and the reinforcement bars removed. Attached Images

02-19-2018, 08:54 PM	#8
idbeast Senior Member Join Date: Oct 2016 Location: Olympia, WA Posts: 523	Re: No Limit X-Member Kit on a TF Then filling unneeded holes in the frame, sanding it and some sandblasting in the hard to get to places then paint!!! Attached Images

02-20-2018, 12:17 AM	#9
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,560	Re: No Limit X-Member Kit on a TF Looks great...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.