The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-22-2018, 10:51 PM   #1
jaws61
Registered User
 
Join Date: Oct 2014
Location: Ontario
Posts: 136
ignition switches

Are task force Ignition switches the same as 60-66 chevy truck or something else?
I bought a set of keys and locks for the doors and glove box and the ignition.. I can find ignition switch that works with the ignition yet?
I'd really like to have one key for everything..
jaws61 is offline   Reply With Quote
Old 02-23-2018, 01:50 AM   #2
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,710
Re: ignition switches

I don't believe they are close to the same. After looking they are not.

This is Brothers page for the ignition switch for the 61 if it opens up to the right page. I see that they must have updated their webpage as it is actually rather simple to navigate now. https://www.brotherstrucks.com/Switc...products/1810/
If that doesn't work go 60/66 Electrical, switches and it will open.

This is Classic parts page for the same thing. Note on either you will need switch, Bezel and lock cylinder if your lock cylinder doesn't match the one in the photo on the page. "universal" switches suck when put in any Chevy truck as they always want to turn in the hole and have wall locker keys in them.
https://www.classicparts.com/Switches/products/206/

This Rock auto page should show the Goodmark number for the correct switch, Looks like they are out of stock there but that number entered in a search might find one. http://www.rockauto.com/en/catalog/c...er+switch,4700
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is online now   Reply With Quote
Old 02-23-2018, 01:54 AM   #3
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,710
Re: ignition switches

Summit shows the Goodmark switch https://www.summitracing.com/parts/gmk-4010-523-625

Link to Goodmark. http://www.goodmarkindustries.com/ch...0-523-625.aspx
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is online now   Reply With Quote
Old 02-23-2018, 08:28 PM   #4
OrrieG
Registered User
 
OrrieG's Avatar
 
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
Re: ignition switches

Try checking you local NAPA store. They might have a Standard brand with original configuration. I learned early on that a lot of the online classic specialty places were buying the same stuff from Standard and marking it way up.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
OrrieG is offline   Reply With Quote
Old 02-23-2018, 09:32 PM   #5
Black_Sheep
Registered User
 
Black_Sheep's Avatar
 
Join Date: Jun 2017
Location: upper midwest
Posts: 1,129
Re: ignition switches

I wanted better quality than the readily available offshore ignition switch, Danchuck makes one with the same look and feel as the original. I also used their lock cylinder and key set.

https://www.danchuk.com/ItemForm.aspx?Item=119
Black_Sheep is offline   Reply With Quote
Old 02-23-2018, 09:59 PM   #6
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,710
Re: ignition switches

Checking Napa you can buy an Echlin switch As Orrie suggested for 18.69 locally. It may be in stock at a local store or it can be had on the next stock shipment with no shipping costs. Your call your dime.

That's an oem replacement switch. https://www.napaonline.com/en/p/ECHKS6175
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is online now   Reply With Quote
Old 02-23-2018, 10:06 PM   #7
jaws61
Registered User
 
Join Date: Oct 2014
Location: Ontario
Posts: 136
Re: ignition switches

Thanks guys that was a huge help!!
jaws61 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:14 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com