The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-16-2018, 01:46 AM   #1
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,710
The Chevy trucks at the Spokane Speed and Custom show today.

I got a wild hair when I got up this morning, grabbed the camera bag, put my Trog shirt on and headed out the door to Spokane after Jacking my wife's Monte Carlo. Three hours and 165 or so miles later I was at the Spokane Expo center and ready to absorb chrome and candy paint for the day.

There weren't a whole lot of AD trucks and only one TF and a couple of later models that were nice. Most of the AD trucks were super nice trucks.

This little red orange one with the flames has been a staple item at the Portland Roadster show for years and I only took a couple of shots of it
Attached Images
  
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is online now   Reply With Quote
Old 04-16-2018, 01:52 AM   #2
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,710
Re: The Chevy trucks at the Spokane Speed and Custom show today.

This one was in the patina class pretty much by it's self in this show so he probably went home with a trophy. Fender looked like someone had beat on the inside with a ball pein hammer to get the little dents to stick out. Louvers are real close to mine in appearance but who ever did them had a better die than the guy who did mine.
Attached Images
    
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is online now   Reply With Quote
Old 04-16-2018, 02:06 AM   #3
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,710
Re: The Chevy trucks at the Spokane Speed and Custom show today.

This little green one just flat caught my attention. I am not a big fan of signs on truck doors unless they actually reflect the family business past or present simply meaning that if your Grandad Leroy had a garage called Leroy's garage and you have that on your doors that is cool but a sign that has no meaning isn't so cool.

This particular truck looks like you might have seen it sitting at a local Texaco when it was almost brand new And it's sharp looks would have attracted customers and built confidence. Everything about it was nice and there were some real tricks like the air cleaner setup.
Attached Images
     
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is online now   Reply With Quote
Old 04-16-2018, 02:15 AM   #4
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,710
Re: The Chevy trucks at the Spokane Speed and Custom show today.

This little 48 is sweet. Chopped 2 inches, great paint and it has an S-10 Blazer front stub on it and runs 4 wheel drive.

The gent that owns it told me my camera would break when I took his photo.
Attached Images
     
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is online now   Reply With Quote
Old 04-16-2018, 02:23 AM   #5
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,710
Re: The Chevy trucks at the Spokane Speed and Custom show today.

A couple more shots of the copper 48.

The little green TF belongs to a member of an all girls/ladies car club and was the lone TF in the show.
Attached Images
    
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is online now   Reply With Quote
Old 04-16-2018, 02:34 AM   #6
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,710
Re: The Chevy trucks at the Spokane Speed and Custom show today.

Three Chevy trucks that are slightly OT but sweet. The yellow 67 (I think) was close to perfection all around. The blue square body is just one really nice truck. What can you say about a Jet shiny black 59 Elkie, packing a W motor with 3 2 barrels and a 4 speed? All I can think of is Wow.

The little Cycle Kart is just flat sweet and really shows some workmanship. I am gathering pieces to build one and will probably have it running next year. I am going to have to bust my tail to have it that nice though.

I haven't uploaded the rest of the photos to a photo host yet but will work on it over the next couple of days and post the link.
Attached Images
     
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is online now   Reply With Quote
Old 04-16-2018, 02:39 AM   #7
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,710
Re: The Chevy trucks at the Spokane Speed and Custom show today.

This is OT as far as the car goes but I had to share it for folks to see the extent of what the show car folks do to show off their handiwork.
The rotor didn't have even one mark from a brake pad stopping it from turning. I was thinking that they swapped the rotor while setting up the display.
Attached Images
 
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is online now   Reply With Quote
Old 04-16-2018, 02:44 AM   #8
MiraclePieCo
Registered User
 
MiraclePieCo's Avatar
 
Join Date: Sep 2014
Location: USA
Posts: 2,249
Re: The Chevy trucks at the Spokane Speed and Custom show today.

Nice stuff. Thanks for taking us along with you.
MiraclePieCo is offline   Reply With Quote
Old 04-16-2018, 02:33 PM   #9
gigamanx
Senior Member
 
Join Date: Sep 2016
Location: Hershey, PA
Posts: 1,004
Re: The Chevy trucks at the Spokane Speed and Custom show today.

Thanks for the pics. Love the louvers on the patina truck. That is a cool idea!
__________________
Current Build Thread 1930 Ford Model A Modern Twist: Ford Model A Rat Rod With a Modern Twist

Build Thread Phase 1 "The Swap": 1949 3100 with S10 swap. Beginner build with ambition!

Build Thread Phase 2 "The Drop": Beginner Build with Ambition gets Air Ride
gigamanx is offline   Reply With Quote
Old 04-16-2018, 06:18 PM   #10
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,774
Re: The Chevy trucks at the Spokane Speed and Custom show today.

thanks for the pics!

I wondered how he had so much room between the column and the seat on this one and realized he stretched the cab






looks like very nice work!
__________________
the mass of men live lives of quiet desperation


if there is a problem, I can have it.

new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393
joedoh is offline   Reply With Quote
Old 04-16-2018, 06:26 PM   #11
MARTINSR
Registered User
 
MARTINSR's Avatar
 
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
Re: The Chevy trucks at the Spokane Speed and Custom show today.

Some sweet rides there!

Brian
__________________
1948 Chevy pickup
Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats!
Bought with paper route money in 1973 when I was 15.

"Fan of most anything that moves human beings"
MARTINSR is offline   Reply With Quote
Old 04-16-2018, 07:56 PM   #12
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,710
Re: The Chevy trucks at the Spokane Speed and Custom show today.

I didn't notice that the cab on the green truck was stretched. There used to be a red one in the Seattle area with a stretched cab but it was a full tilt show truck with chrome everything on the chassis.

I've started working on the rest of the photos getting them in an album on Smugmug Here is the link but I have about 250 photos go go with slow internet at home.
https://robertdavison.smugmug.com/20...d-Custom-Show/
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is online now   Reply With Quote
Old 04-22-2018, 10:57 PM   #13
ebernst
Registered User
 
Join Date: Apr 2016
Location: Gig Harbor, WA
Posts: 35
Re: The Chevy trucks at the Spokane Speed and Custom show today.

Really great photos! I really like the interior of the stretched green truck. it looks like custom leather all the way around, correct?
__________________
Here's my 1953 Chevy 3100 Build Thread and here's my website Classic Nation.
ebernst is offline   Reply With Quote
Old 04-23-2018, 12:30 AM   #14
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,710
Re: The Chevy trucks at the Spokane Speed and Custom show today.

I believe it was or one great imitation of nice leather. I wanted to get better photos but the way things were set I couldn't do it. That looked like a seat you could make a lot of miles in a day on and not be wore out when you got there.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is online now   Reply With Quote
Old 04-23-2018, 06:26 AM   #15
hogfarm
Senior Member
 
Join Date: Jan 2016
Location: Appleton Washington
Posts: 592
Re: The Chevy trucks at the Spokane Speed and Custom show today.

I love the 59 El Camino.I know where there is 1,that was damaged after barn fell down,it is ruff.but the guy wanted $1100.just to much
hogfarm is online now   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:01 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com