TING noise going from park and drive ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blazer2007 · 05-06-2018, 07:25 PM

80 1/2 ton 2 wheel dr. 350/350 stock but mostly all new in the last 4 years. Tranny is the lock up type,is static lowered,flip kit and a cut coil. I do have a bad drum brake that is scarred and is need of a new one but the sound seems to come from the front. Checked u joints which are fairly new,front one has a tiny bit of play.It,s random ting when going from park to reverse or drive,not all the time but more times than not,it,s not a clunk just a ting. I did a quick check but don,t have a day off until Wed. so was looking for other places to look. Doesn,t do it when driving and shifting. Thanks as usual. I,m sure I missed some useful info.

sweetk30 · 05-06-2018, 09:15 PM

gm tech bulliten back in the day was go to local food store with $0.25 cents . buy super bouncy ball . install it in the slip yoke and reinstall the slip yoke back in the trans and test drive it .

gm tech told me this many times.

otherwise its a worn part some place . and just cause a u-joint looks good and no play dont mean its not all junk inside and ready to fall apart . seen this a few times over the years . i recently drove a g30 camper 20 miles for a friend and no vibe or noise . he scrapped it and i got the rear end . he cut the drive shaft and left the yoke -joint still on the diff yoke. i removed it and there was no play . i took off the 2 caps and it was garbage inside ready to grenade .

SunSoaked · 05-06-2018, 09:46 PM

Sprung parking pawl.

cadillac_al · 05-07-2018, 05:54 AM

Quote:

Originally Posted by SunSoaked

Sprung parking pawl.

That's what I was wondering, if you are parked on a hill when this happens.

blazer2007 · 05-07-2018, 10:05 AM

Quote:

Originally Posted by cadillac_al

That's what I was wondering, if you are parked on a hill when this happens.

I do have a slope in my driveway,what is the spring pawl, is that the shifter mech. in the tranny ?

blazer2007 · 05-07-2018, 10:06 AM

Quote:

Originally Posted by blazer2007

I do have a slope in my driveway,what is the spring pawl, is that the shifter mech. in the tranny ?

sorry parking pawl

blazer2007 · 05-07-2018, 10:43 AM

did a search and found some things look at ,shifter linkage, loose bolt in the tranny for the shifter rod.

mMad Dawg · 05-12-2018, 07:05 PM

I would still look at your ujoints. I think you will find there is no grease in them and the cross pieces are worn .

blazer2007 · 05-13-2018, 07:17 PM

Quote:

Originally Posted by mMad Dawg

I would still look at your ujoints. I think you will find there is no grease in them and the cross pieces are worn .

Thanks , I might as well replace them as I,ve developed a small leak at the tranny seal. Does if never end LOL

05-06-2018, 07:25 PM	#1
blazer2007 Registered User Join Date: Jan 2007 Location: vernon b.c. Posts: 3,022	TING noise going from park and drive ? 80 1/2 ton 2 wheel dr. 350/350 stock but mostly all new in the last 4 years. Tranny is the lock up type,is static lowered,flip kit and a cut coil. I do have a bad drum brake that is scarred and is need of a new one but the sound seems to come from the front. Checked u joints which are fairly new,front one has a tiny bit of play.It,s random ting when going from park to reverse or drive,not all the time but more times than not,it,s not a clunk just a ting. I did a quick check but don,t have a day off until Wed. so was looking for other places to look. Doesn,t do it when driving and shifting. Thanks as usual. I,m sure I missed some useful info.

05-06-2018, 09:15 PM	#2
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: TING noise going from park and drive ? gm tech bulliten back in the day was go to local food store with $0.25 cents . buy super bouncy ball . install it in the slip yoke and reinstall the slip yoke back in the trans and test drive it . gm tech told me this many times. otherwise its a worn part some place . and just cause a u-joint looks good and no play dont mean its not all junk inside and ready to fall apart . seen this a few times over the years . i recently drove a g30 camper 20 miles for a friend and no vibe or noise . he scrapped it and i got the rear end . he cut the drive shaft and left the yoke -joint still on the diff yoke. i removed it and there was no play . i took off the 2 caps and it was garbage inside ready to grenade . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

05-06-2018, 09:46 PM	#3
SunSoaked Registered User Join Date: Dec 2011 Location: Yuma Arizona Posts: 1,525	Re: TING noise going from park and drive ? Sprung parking pawl.

05-07-2018, 10:43 AM	#7
blazer2007 Registered User Join Date: Jan 2007 Location: vernon b.c. Posts: 3,022	Re: TING noise going from park and drive ? did a search and found some things look at ,shifter linkage, loose bolt in the tranny for the shifter rod.

05-12-2018, 07:05 PM	#8
mMad Dawg Registered User Join Date: Jun 2009 Location: Calgary AB. Posts: 88	Re: TING noise going from park and drive ? I would still look at your ujoints. I think you will find there is no grease in them and the cross pieces are worn .



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.