Seat Covers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**blownz** · 07-23-2018, 05:13 PM

I am selling my 82 GMC Stepside Pro Street and need to re cover the bench seat. I was wondering what company is sells the best fitting covers, don't want the cheapest and not the most expensive Looking at Black Vinyl.

Bandit130 · 07-23-2018, 06:08 PM

You may get a better price if you take it to an upholstery shop. Would look more professional and will last longer. (IMO)

**TKCR** · 07-23-2018, 10:12 PM

I highly recommend USA1 Industries. They have a guy that makes excellent quality and fitting covers. Here are a few of his covers that I have used.

**dagnabbitt** · 07-24-2018, 09:48 AM

I don't know who manufactures them (maybe USA1?), but I am very happy with the one I got from Classic Industries. I think the price is pretty reasonable. They have a sale one right now, too.

This one would look great in your truck, I think you will more than recoup your investment when you go to sell it.

https://www.classicindustries.com/pr...028100701.html

blindbug · 07-24-2018, 10:43 AM

Quote:

Originally Posted by TKCR

I highly recommend USA1 Industries. They have a guy that makes excellent quality and fitting covers. Here are a few of his covers that I have used.

Why do you always taunt me with that green Vinyl / Tweed seat!?!?? I can't afford to pull my Vinyl-only seat cover for one with tweed just yet! Stop posting these things for my sanity!

Quick question: Does Pete offer sending additional tweed / vinyl along with the cover? I would probably want to inlay some vinyl into my door panels to match the seat and/or cover my speaker boxes in the same material.

**TKCR** · 07-24-2018, 11:14 AM

Quote:

Originally Posted by dagnabbitt

I don't know who manufactures them (maybe USA1?), but I am very happy with the one I got from Classic Industries. I think the price is pretty reasonable. They have a sale one right now, too.

This one would look great in your truck, I think you will more than recoup your investment when you go to sell it.

https://www.classicindustries.com/pr...028100701.html

Acme makes the Classic Industries covers. They are nice covers also, I have used several of them.

**TKCR** · 07-24-2018, 11:17 AM

Quote:

Originally Posted by blindbug

Why do you always taunt me with that green Vinyl / Tweed seat!?!?? I can't afford to pull my Vinyl-only seat cover for one with tweed just yet! Stop posting these things for my sanity!

Quick question: Does Pete offer sending additional tweed / vinyl along with the cover? I would probably want to inlay some vinyl into my door panels to match the seat and/or cover my speaker boxes in the same material.

He may, you would have to talk to him about that. But I know what you mean, both of those seats, I Just love the quality and how they turned out. Pete does great work.

**MJN** · 07-24-2018, 11:31 AM

I just recovered mine using a cover from Classic Industries, turned out pretty well in my opinion considering it was my first time recovering a seat. The cover seems like good quality and didn't break the bank.

**TKCR** · 07-24-2018, 07:52 PM

Quote:

Originally Posted by MJN

I just recovered mine using a cover from Classic Industries, turned out pretty well in my opinion considering it was my first time recovering a seat. The cover seems like good quality and didn't break the bank.

The only problem I have had with Classic Industries seat covers, are the covers for the 73-80 seats, like yours. Did you have any issues with the seat bottom being extremely hard to install? I have used 3 covers and all of them have been almost too short. The last one actually ripped, trying to get it to go on. All the 81-87 covers have been fine.
After getting a refund for the cover that ripped, I ordered another 73-80 cover from USA1 Industries. The fit was perfect. I had measured the Classic Industries cover before sending it back and then I measured this new one. The USA1 cover was 4" longer than the cover that ripped.
Here's a pic of it. It is installed on 77 tilt seat, Camel Tan

**MJN** · 07-24-2018, 09:21 PM

Quote:

Originally Posted by TKCR

The only problem I have had with Classic Industries seat covers, are the covers for the 73-80 seats, like yours. Did you have any issues with the seat bottom being extremely hard to install? I have used 3 covers and all of them have been almost too short. The last one actually ripped, trying to get it to go on. All the 81-87 covers have been fine.
After getting a refund for the cover that ripped, I ordered another 73-80 cover from USA1 Industries. The fit was perfect. I had measured the Classic Industries cover before sending it back and then I measured this new one. The USA1 cover was 4" longer than the cover that ripped.
Here's a pic of it. It is installed on 77 tilt seat, Camel Tan

The seat bottom was a little tight but after a little wrestling it went on alright. It stayed tight and there aren't any wrinkles and hasn't seemed to cause any issues.

RedBed · 07-25-2018, 11:40 AM

This guy has some nice covers!

https://www.ricksupholstery.com

**blownz** · 07-25-2018, 05:17 PM

Thanks Guys for the help. Good thing, I sold it to a guy who wasn't worried about the seat. Now I can get back to my 72 K5 and fix the motor.

07-23-2018, 05:13 PM	#1
blownz Active Member Join Date: Mar 2005 Location: Annapolis, MD Posts: 183	Seat Covers I am selling my 82 GMC Stepside Pro Street and need to re cover the bench seat. I was wondering what company is sells the best fitting covers, don't want the cheapest and not the most expensive Looking at Black Vinyl. Attached Images

07-23-2018, 06:08 PM	#2
Bandit130 Registered User Join Date: Dec 2014 Location: Euless, Texas Posts: 519	Re: Seat Covers You may get a better price if you take it to an upholstery shop. Would look more professional and will last longer. (IMO) __________________ 1974 Cheyenne 10 LWB Stock 350 W/HEI /TH350/AC/4 BBL Quadrajet Mopar by Birth Chevy by Choice

07-23-2018, 10:12 PM	#3
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,979	Re: Seat Covers I highly recommend USA1 Industries. They have a guy that makes excellent quality and fitting covers. Here are a few of his covers that I have used. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

07-24-2018, 09:48 AM	#4
dagnabbitt Senior Member Join Date: Dec 2014 Location: Edmonton Alberta Posts: 1,457	Re: Seat Covers I don't know who manufactures them (maybe USA1?), but I am very happy with the one I got from Classic Industries. I think the price is pretty reasonable. They have a sale one right now, too. This one would look great in your truck, I think you will more than recoup your investment when you go to sell it. https://www.classicindustries.com/pr...028100701.html __________________ DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10

07-24-2018, 11:31 AM	#8
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,051	Re: Seat Covers I just recovered mine using a cover from Classic Industries, turned out pretty well in my opinion considering it was my first time recovering a seat. The cover seems like good quality and didn't break the bank. Attached Images __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

07-25-2018, 11:40 AM	#11
RedBed Registered User Join Date: Apr 2017 Location: TX Posts: 257	Re: Seat Covers This guy has some nice covers! https://www.ricksupholstery.com __________________ *1979 Chevrolet Bonanza/305/4L60/Edelbrock Performer/Holley 600 Classic*

07-25-2018, 05:17 PM	#12
blownz Active Member Join Date: Mar 2005 Location: Annapolis, MD Posts: 183	Re: Seat Covers Thanks Guys for the help. Good thing, I sold it to a guy who wasn't worried about the seat. Now I can get back to my 72 K5 and fix the motor.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.