07-30-2018, 11:48 PM | #11 |
Senior Member
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,494
|
Re: Frankentruck
With the rear end back together, I started driving it some more.
I replaced the rear shocks after over a year of driving it. The front shocks were replaced when the disc brake kit was installed. I also finally got around to attempting to install my new Venom 250. I cut off the old Sears muffler that was too quiet, and had a dime sized hole, so it needed to be replaced. I ended up not being able to replace the muffler myself, so I took it to an exhaust shop that had some pretty neat wall art. The Black Widow Exhaust Venom 250 is stainless steel. It sounds great when I floor it, but just cruising at speed, there is no drone at all. It improved the sound of the truck ten fold.
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
Bookmarks |
|
|