Installing Accuair e-level sensors

[69SHAKA]

I just purchased a pair of CPP control arms for my 69 C10. I'm planning on also purchasing an upgrade to my air ride system with a "e-level" from Accuair. I was wondering if anybody out there has any tips on where & how to mount the sensors on the front control arms and also the rear trailing arms??? Thanks!

[68is4me]

All kinds of different ways of doing it. Best thing to do is do a search for it to get all kinds of ideas. Mine on the fronts I attached the sensor on the cross member and found some clamp rings that attached the front upper PB arms. For the rears I welded piece of metal to the frame lip to lip, and did the same on the rear lower control arms. Here are a couple of pics. They are not the best but maybe they will help,

[69SHAKA]

Thanks for your suggestions & pics too! Those pics gave me a pretty good idea how and about where to locate the sensors! I'm gonna have to try to install these sensors with my body already installed so it will be a little bit more challenging.....Thanks again for your help, appreciate it!!!!