Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-11-2018, 06:53 PM | #1 |
Registered User
Join Date: Sep 2018
Location: Southington CT
Posts: 10
|
help me Identify the transmission I got
I got this extra trans with my new purchase . I think it is a HD 400 or a 475 ? whats the going price on these same as a regular 400 ?
|
09-11-2018, 07:13 PM | #2 |
Registered User
Join Date: Sep 2018
Location: Southington CT
Posts: 10
|
Re: help me Identify the transmission I got
|
09-11-2018, 08:31 PM | #3 |
Registered User
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
|
Re: help me Identify the transmission I got
th400 K-case ment more for 4x4 or hd 3/4 or 1ton stuff .
and a th475 was from p-series chassis and most had bolt on e-brake on the back end . they got straight cut gears in them .
__________________
77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great. |
09-11-2018, 08:43 PM | #4 |
Registered User
Join Date: Sep 2018
Location: Southington CT
Posts: 10
|
Re: help me Identify the transmission I got
Ok so 400 k is what this one is then ?
|
09-11-2018, 10:34 PM | #5 |
Registered User
Join Date: Oct 2011
Location: Tucson, AZ
Posts: 639
|
Re: help me Identify the transmission I got
|
09-12-2018, 08:15 AM | #6 |
Registered User
Join Date: Dec 2013
Location: Columbus, Oh
Posts: 367
|
Re: help me Identify the transmission I got
TH400 for a 4x4 only. And I believe it will only work with certain transfer case adapters because of the output shaft length. Output shaft is to short for a 2wd tailhousing. Price will vary depending on the purchaser. To make it 2wd the transmission would have to be taken apart and changing the output shaft and adding a tailhousing. 2wd output shafts vary if bolt on yoke or slip yoke.
|
09-12-2018, 05:35 PM | #7 |
Registered User
Join Date: Sep 2018
Location: Southington CT
Posts: 10
|
Re: help me Identify the transmission I got
So will this 400 bolt up to a 350 with an adapter and lets say a 205 transfer case without moving transaxel or transmission mounts
|
09-12-2018, 06:22 PM | #8 |
Registered User
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
|
Re: help me Identify the transmission I got
sbc and bbc use the same bell housing pattern . direct bolt up .
as to trans and t-case that combo is specific lengths each . so say you took out a th350 trans and 208 t-case this th400 might or might not drop in . just plan on moving the trans crossemember with a few 7/16 holes drilled in the frame rail lip . then possible drive shaft length change . as to the 205 you need the th400 to 205 adapter for the 205 you have . fig 8 or round 6 bolt pattern . but you also need to measure the tail shaft stick out from the back of the case so you know what shaft you have for bolting fig 8 or round 6 pattern up to it . and the 205 needs to be a 32 spline female input . but most important does this trans work ? have you seen it drive or drove it ? all this could be for nothing if its in need of a full rebuild . and these truck dont have a transaxle unit . thats fwd stuff .
__________________
77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great. |
09-13-2018, 10:38 AM | #9 |
Senior Member
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,661
|
Re: help me Identify the transmission I got
1983 to 1988 turbo 400 out of a 4x with a 208 t-case. May have been behind a 6.2 diesel
|
Bookmarks |
|
|