WTB- NOS 73-80 trim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 03-22-2004, 09:57 PM

I'm looking for a complete set of NOS GM side molding for a 73-80 short fleet. I will consider pieces, but it must be in new condition....

PM or Email me at abcmusic@sbcglobal.net

Russell · 03-22-2004, 10:42 PM

You gettin rid of the gold trim?

**N2TRUX** · 03-22-2004, 10:46 PM

No I'm keeping it. There are a couple of pieces that need replacing due to minor damage. I tried the LMC stuff but it doesn't look like I want, so I'm trying to find a complete set of NOS GM trim to replace it all at once...

bigblock73 · 03-23-2004, 01:32 AM

PM'd ya Ken...hurry up and check it.

SCOTI · 03-23-2004, 01:36 AM

If Ken doesn't buy it all.....I need some too.

**N2TRUX** · 03-25-2004, 12:51 AM

anyone?

**N2TRUX** · 04-01-2004, 11:31 AM

ttt

Nvbowtie · 04-04-2004, 09:42 AM

Try www.gmpartsdirect.com

you'll need the part numbers

SCOTI · 04-04-2004, 07:32 PM

Quote:

Originally posted by Nvbowtie
Try www.gmpartsdirect.com

you'll need the part numbers

Okay.... where can you find the parts #'s?

SCOTI · 04-05-2004, 08:01 PM

Keeping this TTT

Nvbowtie · 04-06-2004, 05:16 AM

Quote:

Originally posted by SCOTI

Okay.... where can you find the parts #'s?

Parts illustration book, or go to dealer they can pull up part numbers off thier computer

Here is example of research for my 1980
345123 Rear cab Mld Center
345124 Rear cab Mld corner RH
345125 Rear cab Mld corner LH
347705 Dash emblem
364377 Door Handle trim - GM uses this number for L/R
364379 Door panel trim ring LH
364380 Door panel trim ring RH
461616 Dash plaque
466759 Aluminum panel -LH
466760 Aluminum panel -RH

SCOTI · 04-06-2004, 02:55 PM

Quote:

Originally posted by Nvbowtie

Parts illustration book, or go to dealer they can pull up part numbers off thier computer

I was hoping for something from possibly the internet. I hate to tie up the parts guys 'puter just to look. If I already had PN's walking in the door, they will do a search for what you seek.

No PN's & since everything is discontinued, that's as far as they go (w/o much effort to actually search).

Thanks for the tips though.

Jonboy · 04-06-2004, 03:39 PM

Fender

Rt mldg. upper-6260840
Lt. mldg upper -6260839
Rt. mldg. front-374295 Lt same part #
Rt. lower mldg-6260842
Lt. lower mldg-6260841
"Cheyenne 10" nameplate 14016636

Door
Rt upper mldg; yellow-463608
Lt. upper mldg yellow -463607
Rt. upper black-475544
Lt. upper black-475543
Rt. lower yellow-463612
Lt. lower yellow-463611
rt. lower black-475560
Lt. lower black-475559

Tailgate upper and lower-475535

I got these from the estimating system I use at work. I need to know the wheelbase measurements for long and short to sort the stuff from the bed moldings I found. That and I can't type, so those took forever. Not all of the moldings were showing both black and yellow, I put up what I could find. I also don't know which ones might be discontinued.

SCOTI · 04-06-2004, 08:58 PM

Jonboy.... you 'da man.

The wheelbase is 117.5". I'm suprised they list them as black or yellow. I assumed they would be one color or the other & more than likely whatever color was available last.... yellow.

ElGracho · 04-06-2004, 09:07 PM

Most of these pieces are not discontinued, but the ones that are available are available only in black.

Ken - if you still need help with this, pm me. I just bought an NOS set at the swap meet in Portland this weekend. I have all the pieces and they are all really easy to get to if you want me to look at some numbers.

SCOTI · 04-06-2004, 09:29 PM

Quote:

Originally posted by ElGracho
Most of these pieces are not discontinued, but the ones that are available are available only in black.

Ken - if you still need help with this, pm me. I just bought an NOS set at the swap meet in Portland this weekend. I have all the pieces and they are all really easy to get to if you want me to look at some numbers.

Good to know. The more I thought about it, black would be the more common color since the yellow was 77 only right?

bigblock73 · 04-06-2004, 10:15 PM

Quote:

Originally posted by SCOTI
the yellow was 77 only right?

correct.

Jonboy · 04-06-2004, 11:14 PM

117.5" is shortbed, correct? I will add the rest of them tomorrow.

SCOTI · 04-07-2004, 12:14 AM

Excellent. I can't thank you enough..... or can I? Your not too far away that I couldn't supply you w/a frothy beverage or 2

.

Jonboy · 04-07-2004, 10:46 AM

Bed Moldings-
Rt. upper w/o 117.5 wb-black-475550
Lt. " -475549
Rt. upper w/o 117.5 wb-yellow-463618
Lt. " -463617
Rt. Upper w/ 117.5 wb black-475548
Lt. " -475547
Rt. Upper w/117.5 wb yellow-463656
Lt " -463655
Rt. molding lower front w/o 117.5 wb black-475564
Lt. " -475563
Rt. molding lower front w/o 117.5 wb yellow-463624
Lt. " -463623
Rt. lower molding rear w/o 117.5 wb-black-475566
Lt. " -475565
Rt. lower molding rear w/o 117.5 wb yellow-463614
Lt. " -463613
Rt. front lower w/117.5-black-475562
Lt. " -475561
Rt. front lower w/ 117.5 yellow-463352
Lt. " -463351
Rt. rear lower w/117.5 black-475582
Lt. " -475581
Rt. rear lower w/117.5 yellow-463622
Lt. " -463621

Cab moldings behind door-
black-6258145
yellow-463609

I think I got it covered there. Hopefully those are the right numbers, usually the estimating system is right on when it breaks down the options like that.

dswancutt · 05-12-2004, 09:59 PM

I don't know if you are still looking, but I found this on eBay.

http://cgi.ebay.com/ebaymotors/ws/eB...category=33654

Doug

**N2TRUX** · 05-12-2004, 10:30 PM

Yep, I'm still looking. Thanks for the heads up...

**N2TRUX** · 05-12-2004, 10:34 PM

Quote:

Originally Posted by ElGracho

.... I just bought an NOS set at the swap meet in Portland this weekend. I have all the pieces and they are all really easy to get to if you want me to look at some numbers.

It looks like we have the part numbers covered now. You found a complete NOS set? You lucky dog! If you don't mind me asking, what would I expect to pay if I were to stumble across a set?

ElGracho · 05-12-2004, 11:46 PM

I paid $200. It was an awesome find since the pieces you CAN get from GM are over $1000 if you're paying list. You can't get the lower rear pieces on the front fenders.

The set I got even included the upper and lower pieces around the grill and the drip rails. I was pretty stoked. Two people I was with at that swap meet had just paid the big bucks to GM. They weren't too happy to see me get that deal...

**N2TRUX** · 05-13-2004, 10:59 PM

Quote:

Originally Posted by ElGracho

I paid $200. It was an awesome find since the pieces you CAN get from GM are over $1000 if you're paying list....

Did you grab it and run? That is stealing ya know. Thats cheap even if it were available at every day low prices.

There is supposed to be a swap meet here this weekend. If I can get my 77 rolling I may try to get by there...

03-22-2004, 09:57 PM	#1
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	WTB- NOS 73-80 trim I'm looking for a complete set of NOS GM side molding for a 73-80 short fleet. I will consider pieces, but it must be in new condition.... PM or Email me at abcmusic@sbcglobal.net __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

03-22-2004, 10:42 PM	#2
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	You gettin rid of the gold trim? __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

03-23-2004, 01:32 AM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	PM'd ya Ken...hurry up and check it. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

03-23-2004, 01:36 AM	#5
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,080	If Ken doesn't buy it all.....I need some too. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-01-2004, 11:31 AM	#7
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	ttt __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

03-22-2004, 10:46 PM	#3
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	No I'm keeping it. There are a couple of pieces that need replacing due to minor damage. I tried the LMC stuff but it doesn't look like I want, so I'm trying to find a complete set of NOS GM trim to replace it all at once...

03-25-2004, 12:51 AM	#6
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	anyone?

04-04-2004, 09:42 AM	#8
Nvbowtie Registered User Join Date: Jul 2001 Location: Laughlin, Nv. USA Posts: 700	Try www.gmpartsdirect.com you'll need the part numbers __________________ www.unlimited2u.com/chevy Bill 1980 Chevy C-10 Silverado 1988 Chevy Blazer Tahoe

04-05-2004, 08:01 PM	#10
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,080	Keeping this TTT __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-06-2004, 03:39 PM	#13
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Fender Rt mldg. upper-6260840 Lt. mldg upper -6260839 Rt. mldg. front-374295 Lt same part # Rt. lower mldg-6260842 Lt. lower mldg-6260841 "Cheyenne 10" nameplate 14016636 Door Rt upper mldg; yellow-463608 Lt. upper mldg yellow -463607 Rt. upper black-475544 Lt. upper black-475543 Rt. lower yellow-463612 Lt. lower yellow-463611 rt. lower black-475560 Lt. lower black-475559 Tailgate upper and lower-475535 I got these from the estimating system I use at work. I need to know the wheelbase measurements for long and short to sort the stuff from the bed moldings I found. That and I can't type, so those took forever. Not all of the moldings were showing both black and yellow, I put up what I could find. I also don't know which ones might be discontinued. __________________ 1974 Jimmy- 5.3/4L80e/NP241

04-06-2004, 08:58 PM	#14
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,080	Jonboy.... you 'da man. The wheelbase is 117.5". I'm suprised they list them as black or yellow. I assumed they would be one color or the other & more than likely whatever color was available last.... yellow. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-06-2004, 09:07 PM	#15
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	Most of these pieces are not discontinued, but the ones that are available are available only in black. Ken - if you still need help with this, pm me. I just bought an NOS set at the swap meet in Portland this weekend. I have all the pieces and they are all really easy to get to if you want me to look at some numbers. __________________ Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed

04-06-2004, 11:14 PM	#18
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	117.5" is shortbed, correct? I will add the rest of them tomorrow. __________________ 1974 Jimmy- 5.3/4L80e/NP241

04-07-2004, 12:14 AM	#19
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,080	Excellent. I can't thank you enough..... or can I? Your not too far away that I couldn't supply you w/a frothy beverage or 2 . __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-07-2004, 10:46 AM	#20
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Bed Moldings- Rt. upper w/o 117.5 wb-black-475550 Lt. " -475549 Rt. upper w/o 117.5 wb-yellow-463618 Lt. " -463617 Rt. Upper w/ 117.5 wb black-475548 Lt. " -475547 Rt. Upper w/117.5 wb yellow-463656 Lt " -463655 Rt. molding lower front w/o 117.5 wb black-475564 Lt. " -475563 Rt. molding lower front w/o 117.5 wb yellow-463624 Lt. " -463623 Rt. lower molding rear w/o 117.5 wb-black-475566 Lt. " -475565 Rt. lower molding rear w/o 117.5 wb yellow-463614 Lt. " -463613 Rt. front lower w/117.5-black-475562 Lt. " -475561 Rt. front lower w/ 117.5 yellow-463352 Lt. " -463351 Rt. rear lower w/117.5 black-475582 Lt. " -475581 Rt. rear lower w/117.5 yellow-463622 Lt. " -463621 Cab moldings behind door- black-6258145 yellow-463609 I think I got it covered there. Hopefully those are the right numbers, usually the estimating system is right on when it breaks down the options like that. __________________ 1974 Jimmy- 5.3/4L80e/NP241



Register or Log In To remove these advertisements.

05-12-2004, 09:59 PM	#21
dswancutt Registered User Join Date: Jul 2003 Location: Franklin, NE Posts: 387	WTB NOS 78-80 Trim I don't know if you are still looking, but I found this on eBay. http://cgi.ebay.com/ebaymotors/ws/eB...category=33654 Doug

05-12-2004, 10:30 PM	#22
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Yep, I'm still looking. Thanks for the heads up...

05-12-2004, 11:46 PM	#24
ElGracho Gentleman Jim Driver Join Date: Nov 2002 Location: Poulsbo, WA Posts: 1,553	I paid $200. It was an awesome find since the pieces you CAN get from GM are over $1000 if you're paying list. You can't get the lower rear pieces on the front fenders. The set I got even included the upper and lower pieces around the grill and the drip rails. I was pretty stoked. Two people I was with at that swap meet had just paid the big bucks to GM. They weren't too happy to see me get that deal...

Register or Log In To remove these advertisements.