Newbie From Arizona - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nreeves · 09-25-2018, 03:56 PM

Hello all.

After searching this forum and getting alot of valuable questions answered, I finally became a member.

I have a 68 GMC that's kind of a mutt. Somewhere along the way it was converted to 4x4 with a sbc350. I am swapping out the 10 bolt axles for a 14 bolt rear with disk brakes and a dana 44 up front. It's also getting a 2001 5.3 vortec swap with the 4l60e and np208 transfer case. I am trying to keep the exterior/interior as original as possible with just updating all the running gear. I have most of my parts on hand now it's just a matter of getting it all finished up and drivable.

Thank you all.

mikebte · 09-26-2018, 11:41 PM

Quote:

Originally Posted by Nreeves

Hello all.

After searching this forum and getting alot of valuable questions answered, I finally became a member.

I have a 68 GMC that's kind of a mutt. Somewhere along the way it was converted to 4x4 with a sbc350. I am swapping out the 10 bolt axles for a 14 bolt rear with disk brakes and a dana 44 up front. It's also getting a 2001 5.3 vortec swap with the 4l60e and np208 transfer case. I am trying to keep the exterior/interior as original as possible with just updating all the running gear. I have most of my parts on hand now it's just a matter of getting it all finished up and drivable.

Thank you all.

Congratulations on joining. Good to have you. Nothing wrong with mutt, that is what drives use to build our trucks.
We may need to talk on that 10 bolt. I have been keeping my eye out for a used 10 bolt 6 lug

Lokin4AReason · 09-27-2018, 09:55 AM

greeting(s) to the board ...

Nreeves · 09-27-2018, 11:27 AM

Quote:

Originally Posted by mikebte

Congratulations on joining. Good to have you. Nothing wrong with mutt, that is what drives use to build our trucks.
We may need to talk on that 10 bolt. I have been keeping my eye out for a used 10 bolt 6 lug

If you are localism and can pick up the stock axles they are all yours. I have no use for them. The rear end is the orginal and the front is a 4x4 10bolt

mikebte · 09-28-2018, 12:58 AM

Quote:

Originally Posted by Nreeves

If you are localism and can pick up the stock axles they are all yours. I have no use for them. The rear end is the orginal and the front is a 4x4 10bolt

Sounds like a date. I’ll hit you up in a PM

09-25-2018, 03:56 PM	#1
Nreeves Registered User Join Date: Sep 2018 Location: Wickenburg AZ Posts: 0	Newbie From Arizona Hello all. After searching this forum and getting alot of valuable questions answered, I finally became a member. I have a 68 GMC that's kind of a mutt. Somewhere along the way it was converted to 4x4 with a sbc350. I am swapping out the 10 bolt axles for a 14 bolt rear with disk brakes and a dana 44 up front. It's also getting a 2001 5.3 vortec swap with the 4l60e and np208 transfer case. I am trying to keep the exterior/interior as original as possible with just updating all the running gear. I have most of my parts on hand now it's just a matter of getting it all finished up and drivable. Thank you all.

09-27-2018, 09:55 AM	#3
Lokin4AReason Registered User Join Date: Oct 2014 Location: somewhere . . . Posts: 973	Re: Newbie From Arizona greeting(s) to the board ... __________________ dont want to hear excuses, i want to hear solution(s)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.