1970 K10 SB Stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Travisarmenta · 10-01-2018, 11:01 AM

Strait 6, Runs, Drives, Stops.

It does have rust, Its a Virginia truck.

Working out a trade right now.

I know its a Factory K10 SB Stepside.

I know pics will help with estimate, but just from info you have, what do you guys think?

Working out a trade for it

**richard2717** · 10-02-2018, 07:04 AM

without more detail it is hard to say but if good title and running driving condition should be $1500 and up imo

Travisarmenta · 10-02-2018, 11:24 AM

added pics

Mudder · 10-05-2018, 05:26 PM

I give 1500 for it.

*Harlowhead1972* · 10-08-2018, 11:29 AM

$2500-3000. The lack of bed definitely hurts the value. True short bed 4x4's are getting hard to find in any condition. Harlow

Travisarmenta · 10-09-2018, 09:28 AM

Quote:

Originally Posted by Harlowhead1972

$2500-3000. The lack of bed definitely hurts the value. True short bed 4x4's are getting hard to find in any condition. Harlow

That was my thought as well, the Strait 6 and no bed def makes it less desirable and (I actually like the bed) If i pick it up, I will most likely replace the 6.

*Harlowhead1972* · 10-09-2018, 09:58 AM

Any idea on gear ratio? I'm guessing 4.11 if the six is original. It would also be interesting to see if it has the Rockwell T-case or NP205 since 1970 was a split year, maybe even the little Dana with the six? Harlow

Travisarmenta · 10-09-2018, 10:49 AM

Quote:

Originally Posted by Harlowhead1972

Any idea on gear ratio? I'm guessing 4.11 if the six is original. It would also be interesting to see if it has the Rockwell T-case or NP205 since 1970 was a split year, maybe even the little Dana with the six? Harlow

I will let you know when I find out. The SPID does not have any info on the gearing though, it does however have the 292 CI RPO.

Travisarmenta · 10-09-2018, 01:17 PM

Quote:

Originally Posted by Harlowhead1972

Any idea on gear ratio? I'm guessing 4.11 if the six is original. It would also be interesting to see if it has the Rockwell T-case or NP205 since 1970 was a split year, maybe even the little Dana with the six? Harlow

Just did a little more digging, it's actually a Fleetside truck. Looks like the 205 was standard in 1970 according to GM heritage center.

And the K series came standard with 3:73 as well.

No RPOs for either gearing, nor transfer case.

It is a Z62 truck with both upper and lower moldings, so if I grab it and keep it, I might bring her back to her glory, a little at a time.

Travisarmenta · 10-10-2018, 12:06 PM

Quote:

Originally Posted by Harlowhead1972

Any idea on gear ratio? I'm guessing 4.11 if the six is original. It would also be interesting to see if it has the Rockwell T-case or NP205 since 1970 was a split year, maybe even the little Dana with the six? Harlow

Received confirmation via pic, it is a 205. might make the deal happen by end of the week.

Travisarmenta · 10-15-2018, 10:12 AM

It's home, pics to follow in truck thread.

*Harlowhead1972* · 10-19-2018, 09:22 AM

Congrats!

10-01-2018, 11:01 AM	#1
Travisarmenta Registered User Join Date: Oct 2015 Location: Woodbridge Va Posts: 401	1970 K10 SB Stepside Strait 6, Runs, Drives, Stops. It does have rust, Its a Virginia truck. Working out a trade right now. I know its a Factory K10 SB Stepside. I know pics will help with estimate, but just from info you have, what do you guys think? Working out a trade for it

10-02-2018, 07:04 AM	#2
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,127	Re: 1970 K10 SB Stepside without more detail it is hard to say but if good title and running driving condition should be $1500 and up imo __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

10-02-2018, 11:24 AM	#3
Travisarmenta Registered User Join Date: Oct 2015 Location: Woodbridge Va Posts: 401	Re: 1970 K10 SB Stepside pic added added pics Attached Images

10-05-2018, 05:26 PM	#4
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: 1970 K10 SB Stepside I give 1500 for it.

10-08-2018, 11:29 AM	#5
Harlowhead1972 Account Suspended Join Date: Feb 2018 Location: Powell, WY Posts: 2,048	Re: 1970 K10 SB Stepside $2500-3000. The lack of bed definitely hurts the value. True short bed 4x4's are getting hard to find in any condition. Harlow

10-09-2018, 09:58 AM	#7
Harlowhead1972 Account Suspended Join Date: Feb 2018 Location: Powell, WY Posts: 2,048	Re: 1970 K10 SB Stepside Any idea on gear ratio? I'm guessing 4.11 if the six is original. It would also be interesting to see if it has the Rockwell T-case or NP205 since 1970 was a split year, maybe even the little Dana with the six? Harlow

10-15-2018, 10:12 AM	#11
Travisarmenta Registered User Join Date: Oct 2015 Location: Woodbridge Va Posts: 401	Re: 1970 K10 SB Stepside It's home, pics to follow in truck thread.

10-19-2018, 09:22 AM	#12
Harlowhead1972 Account Suspended Join Date: Feb 2018 Location: Powell, WY Posts: 2,048	Re: 1970 K10 SB Stepside Congrats!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.