Gas tank filler neck mod/swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DBear · 11-21-2018, 06:22 PM

Hey guys, has anyone bought a new metal gas tank kit, which I believe most or all come with the wrong filler neck attached? I want to swap my old filler neck on the new tank. Has anyone done this that can give me some pointers or suggestions on how best to do this?

LuckyScott · 11-21-2018, 09:13 PM

I took the tank and the filler neck to a shop and he welded it on. Didn't cost much. It has two bolts so no worries on orientation. Looks like the original is bolted and then maybe leaded.

**1rippen6** · 11-22-2018, 10:11 AM

Quote:

Originally Posted by LuckyScott

I took the tank and the filler neck to a shop and he welded it on. Didn't cost much. It has two bolts so no worries on orientation. Looks like the original is bolted and then maybe leaded.

Happy Thanksgiving, where did you get your tank?

**A1971Blazer** · 11-22-2018, 10:30 AM

It's soldered on with soft solder....remove the nuts and heat it up.....it will come right off.
clean both surfaces well....remove any paint or rust that might be on the new tank...apply a generous amount of flux and solder it back on.....or take it to a radiator shop....they can do it.

DBear · 11-22-2018, 03:06 PM

Quote:

Originally Posted by 1rippen6

Happy Thanksgiving, where did you get your tank?

I got my tank from a place here in Texas called Lone Star Car Parts. It is labeled as a Counterpart...seems pretty nice quality

LuckyScott · 11-22-2018, 03:45 PM

" where did you get your tank? "

I got my tank from a nice guy here on this board. He put a new everything in his blazer and decided to go with a brand new tank. His old tank was fine, but he took the filler neck off it. So I found another guy here with a filler neck for sale and bought that.

11-21-2018, 06:22 PM	#1
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 867	Gas tank filler neck mod/swap Hey guys, has anyone bought a new metal gas tank kit, which I believe most or all come with the wrong filler neck attached? I want to swap my old filler neck on the new tank. Has anyone done this that can give me some pointers or suggestions on how best to do this?

11-21-2018, 09:13 PM	#2
LuckyScott Registered User Join Date: Jun 2010 Location: Anaheim, Calif. Posts: 361	Re: Gas tank filler neck mod/swap I took the tank and the filler neck to a shop and he welded it on. Didn't cost much. It has two bolts so no worries on orientation. Looks like the original is bolted and then maybe leaded.

11-22-2018, 10:30 AM	#4
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,199	Re: Gas tank filler neck mod/swap It's soldered on with soft solder....remove the nuts and heat it up.....it will come right off. clean both surfaces well....remove any paint or rust that might be on the new tank...apply a generous amount of flux and solder it back on.....or take it to a radiator shop....they can do it. __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

11-22-2018, 03:45 PM	#6
LuckyScott Registered User Join Date: Jun 2010 Location: Anaheim, Calif. Posts: 361	Re: Gas tank filler neck mod/swap " where did you get your tank? " I got my tank from a nice guy here on this board. He put a new everything in his blazer and decided to go with a brand new tank. His old tank was fine, but he took the filler neck off it. So I found another guy here with a filler neck for sale and bought that.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.