72 suburban build

[sambob2285]

I have bagged it in the past 3 years too. This will show that process. I first had to get the small frame C notch installed


This is was my first valve set up to control the air ride.

Installed under the truck

Air compressors and the mounting bracket I made.

Bracket test fitted before final install

2.5 3/4 ton drop spindles (found out that this truck is a heavy halfton so it has 3/4ton front end pieces

Front end rebuild and bags going in


Rear bags in

Compressors mounted

Air line run and hooked up as well as wiring